question about accessories set up.

DC_ACU · December 10th, 2007, 23:33

I have a question that i couldnt figure out on google..
for those that like to have theyr RDS on the forward half of theyr gun,
(lets say you have an m4, and you like to have your RDS on the heatgaurd, instead of the top rail of the receiver) would, or does anyone put theyr PEQ behind theyr RDS? im using an aimpoint as an example because i dont know how wide an EOTech is, but iv moved around my set up and it looks like the lens' for the lasers are clear of any object obstructing the view. I know most of you are probably saying 'just put the PEQ on one of the side rails, but i dont like how it looks, too bulky on one side.

so, does anyone else do this?

youonlywish · December 11th, 2007, 05:48

If it works for you, it works for you.

Mr. G36! · December 11th, 2007, 10:52

I agree with that. Though my concern about that set-up would be how much you can actually see. I mean, the closer your eye is to the lens, the more you can see. If the RDS was further away, I'd imagine that a good portion of your vision would be obstructed.

But yeah, if it works for you, do it.

Danke · December 11th, 2007, 12:04

I use 2 eyes open with a red dot. I find further down the rail is less obtrusive and you see more since the scope isn't covering your whole eye.

DC_ACU · December 11th, 2007, 17:07

Quote:

Originally Posted by Danke

I use 2 eyes open with a red dot. I find further down the rail is less obtrusive and you see more since the scope isn't covering your whole eye.

this is why i do it, it seems easier lo line up the site for me.

Kos-Mos · December 11th, 2007, 17:47

I say if it works for your =)

I actually put my RDS as close as possible to me... and still aim both eyes open.... I get an almost perfect view front and left and quite clear for front to 45deg right...

Nervikaire · December 11th, 2007, 17:54

Well, the question is about the PEQ... I have never, ever seen a PEQ mounted in FRONT of an optic. For the look, I would say don't do it... But if it's the way you're more comfortable and balanced, just do it and screw how it looks.

As for how practical it would be in RL to have an an/PEQ in that position, I can't say anything, because I would be speaking out of my ass...

Trader rating · December 11th, 2007, 18:00

Well, you really don't want something infront of a PEQ2/PAQ4 since that would most likely not give the PEQ2/PAQ4 a clear line of sight for the IR laser/light it shoots out an it would be pretty useless than.

Also, you would be mounting them on the handguards, there is a "heat shield" but its attached to the inside of the handguard an you wouldn't mount anything on that.

Danke · December 11th, 2007, 18:47

I guess I kind of ignored half of the question there. You have to set up for max effectiveness, so if the emitter needs to be on the side rail that's where it goes.

The way something looks really can't even enter your head. It has to function itself and not impair access to or function of any other working parts.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 10th, 2007, 23:33	#1
DC_ACU Trader rating Join Date: Apr 2007 Location: Toronto ON	question about accessories set up. I have a question that i couldnt figure out on google.. for those that like to have theyr RDS on the forward half of theyr gun, (lets say you have an m4, and you like to have your RDS on the heatgaurd, instead of the top rail of the receiver) would, or does anyone put theyr PEQ behind theyr RDS? im using an aimpoint as an example because i dont know how wide an EOTech is, but iv moved around my set up and it looks like the lens' for the lasers are clear of any object obstructing the view. I know most of you are probably saying 'just put the PEQ on one of the side rails, but i dont like how it looks, too bulky on one side. so, does anyone else do this?

December 11th, 2007, 05:48	#2
youonlywish Trader rating Join Date: Mar 2006 Location: Brantford, ON.	If it works for you, it works for you. __________________ The Devil's Bench - Gaming Cafe, Brantford, ON.

December 11th, 2007, 10:52	#3
Mr. G36! Trader rating Join Date: Jul 2007 Location: Beautiful Thunder Bay, where dreams become nightmares!	I agree with that. Though my concern about that set-up would be how much you can actually see. I mean, the closer your eye is to the lens, the more you can see. If the RDS was further away, I'd imagine that a good portion of your vision would be obstructed. But yeah, if it works for you, do it. __________________ Airsoft It's all fun and games until someone gets hurt...and then it becomes sport!

December 11th, 2007, 12:04	#4
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	I use 2 eyes open with a red dot. I find further down the rail is less obtrusive and you see more since the scope isn't covering your whole eye.

December 11th, 2007, 17:47	#6
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	I say if it works for your =) I actually put my RDS as close as possible to me... and still aim both eyes open.... I get an almost perfect view front and left and quite clear for front to 45deg right...

December 11th, 2007, 17:54	#7
Nervikaire Trader rating Join Date: Dec 2004 Location: Magog, QC	Well, the question is about the PEQ... I have never, ever seen a PEQ mounted in FRONT of an optic. For the look, I would say don't do it... But if it's the way you're more comfortable and balanced, just do it and screw how it looks. As for how practical it would be in RL to have an an/PEQ in that position, I can't say anything, because I would be speaking out of my ass... __________________ http://www.pbase.com/nervikaire Potius mori quam foedari http://www.canadiangunnutz.com/

December 11th, 2007, 18:00	#8
-Skeletor- Guest Trader rating	Well, you really don't want something infront of a PEQ2/PAQ4 since that would most likely not give the PEQ2/PAQ4 a clear line of sight for the IR laser/light it shoots out an it would be pretty useless than. Also, you would be mounting them on the handguards, there is a "heat shield" but its attached to the inside of the handguard an you wouldn't mount anything on that.

December 11th, 2007, 18:47	#9
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	I guess I kind of ignored half of the question there. You have to set up for max effectiveness, so if the emitter needs to be on the side rail that's where it goes. The way something looks really can't even enter your head. It has to function itself and not impair access to or function of any other working parts.

question about accessories set up.

Airsoft Guns Discussion