TM MK23 Holster

Five_Seven · September 20th, 2012, 16:40

So my new TM MK23 will be arriving soon, and my previous experience with this pistol is that It's quite larger than your average side arm, and finding a good holster for it would seem to be difficult.

Any suggestions on a good holster for the TM MK23, and where I could get one?

Thanks!

DextahBoy · September 20th, 2012, 16:57

Hmmm a holster i can think of that could fit the MK23 is the G-Code holsters... but there aren't any in Canada... only in the US...

Five_Seven · September 20th, 2012, 17:57

Quote:

Originally Posted by DextahBoy

Hmmm a holster i can think of that could fit the MK23 is the G-Code holsters... but there aren't any in Canada... only in the US...

Thanks! Well as long as there's no new law for importing gear I don't foresee any problems with getting one from the US.

Varjeal · September 20th, 2012, 19:16

VCboy on EAR forums make custom kydex for the Mk23. Not sure if he uses the same name on here. If he does drop him a pm. Reasonable prices and they're very high quality.

Five_Seven · September 20th, 2012, 19:42

Quote:

Originally Posted by Varjeal

VCboy on EAR forums make custom kydex for the Mk23. Not sure if he uses the same name on here. If he does drop him a pm. Reasonable prices and they're very high quality.

Awesome, thanks! I will try and get ahold of him.

Oborous · September 20th, 2012, 23:29

I have the first VCBoy Mk23 holster that he made. It's top notch and beautiful draw, he worked with me to get just the right amount of retention. He built it for a Picitanny adapter and M6X light on it; he can make almost anything work.

Buy with confidence.

*Disclaimer, I consider him a friend; he truly is a good guy*

attack-beaver · September 21st, 2012, 04:00

The Calgary Shooting Centre is the official Canadian dealer for G code holster in Canada and they had 2 or 3 CB MK23 holsters in stock for i think $60ish bucks.

give them a call at 403-451-1777. i got my Mk23 holster from CSC and i love it and the RTI system is just simple genius.

DextahBoy · September 21st, 2012, 19:38

Oh and also are you planning to fit the MK. 23 with a silencer because the G-code wont fit the pistol+LAM and silencer, just a heads up!

sab567 · September 21st, 2012, 20:04

If you are interest, I remember I have a TM MK23 holster OD color.
It fit with the LAM unit and silencer, only missing the clip between the femele pin and velcro. (I think it could be...2$ or you do like me and don't care because the pistol fit perfecly and never pull out the holster).

MP me if you are interest.

iname · September 22nd, 2012, 00:54

This holster i find works best (Universal Tactical Drop Leg Light Pistol RH Holster OD) you can find themin most colours and they will fit the larger pistols with lam units. On a similar note they also have the same style if you have a molle rig. I believe condor makes them. Usually priced between 25$-50$.

MrEvolution · September 22nd, 2012, 01:18

http://www.redwolfairsoft.com/redwol...23&mode=simple

I have one of these but havent got around to actually using it yet.

And God uses the MK23 as a primary. It's that big.

Five_Seven · September 24th, 2012, 21:29

Quote:

Originally Posted by DextahBoy

Oh and also are you planning to fit the MK. 23 with a silencer because the G-code wont fit the pistol+LAM and silencer, just a heads up!

Yeah I hoped to have a holster that could fit it with the supressor attached, not overly worried about having the LAM attached, I'd like to but my primary concern is to have a secure fit for the gun and supressor. Definitely lots of options out there, may just have to order a few different ones and find the right fit.

Azathoth · September 25th, 2012, 12:24

It's a real problem to find a holster for that gun even custom made. Another bump for a custom Kydex Holster from Edmontonairsoft's vcboy. I believe he uses a different handle on ASC

vink · September 26th, 2012, 10:45

I have a Blackhawk Industries Left hand drop leg holster for the mk23. I bought it years ago and it's in great shape. I would sell it but I just got a kwa mk23.

dice · September 26th, 2012, 12:25

I have the G-code standard holster for my KWA MK23 and it is perfect! Highly recommended. With no adjustments it also fits a G18c AEP (for Winter) With a little adjustments it WILL fit a TM Mk23. Got mine from AirsoftGI with a belt loop.

Also, I run it on a molle black hawk platform for a battle belt. I found that two out of three screw holes line up perfectly. Which is enough to keep it very secure. Use some locktite.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 20th, 2012, 16:40	#1
Five_Seven Trader rating Join Date: May 2012 Location: Port Coquitlam, BC	TM MK23 Holster So my new TM MK23 will be arriving soon, and my previous experience with this pistol is that It's quite larger than your average side arm, and finding a good holster for it would seem to be difficult. Any suggestions on a good holster for the TM MK23, and where I could get one? Thanks!

September 22nd, 2012, 00:54	#10
iname Trader rating Join Date: Jan 2005 Location: London,Ontario	This holster i find works best (Universal Tactical Drop Leg Light Pistol RH Holster OD) you can find themin most colours and they will fit the larger pistols with lam units. On a similar note they also have the same style if you have a molle rig. I believe condor makes them. Usually priced between 25$-50$. __________________ primary: ICS m4a1 (full metal) secondary: kjw 1911a1 (CO2) back up: PT99 (CO2, full auto)

September 20th, 2012, 16:57	#2
DextahBoy Trader rating Join Date: Jan 2012 Location: Ottawa, Ontario	Hmmm a holster i can think of that could fit the MK23 is the G-Code holsters... but there aren't any in Canada... only in the US...

September 20th, 2012, 19:16	#4
Varjeal Banned Trader rating Join Date: May 2011 Location: Beaumont, Alberta	VCboy on EAR forums make custom kydex for the Mk23. Not sure if he uses the same name on here. If he does drop him a pm. Reasonable prices and they're very high quality.

September 20th, 2012, 23:29	#6
Oborous Trader rating Join Date: May 2008 Location: Edmonton, AB	I have the first VCBoy Mk23 holster that he made. It's top notch and beautiful draw, he worked with me to get just the right amount of retention. He built it for a Picitanny adapter and M6X light on it; he can make almost anything work. Buy with confidence. Disclaimer, I consider him a friend; he truly is a good guy

September 21st, 2012, 04:00	#7
attack-beaver Trader rating Join Date: May 2005 Location: calgary	The Calgary Shooting Centre is the official Canadian dealer for G code holster in Canada and they had 2 or 3 CB MK23 holsters in stock for i think $60ish bucks. give them a call at 403-451-1777. i got my Mk23 holster from CSC and i love it and the RTI system is just simple genius.

September 21st, 2012, 19:38	#8
DextahBoy Trader rating Join Date: Jan 2012 Location: Ottawa, Ontario	Oh and also are you planning to fit the MK. 23 with a silencer because the G-code wont fit the pistol+LAM and silencer, just a heads up!

September 21st, 2012, 20:04	#9
sab567 Trader rating Join Date: Feb 2011 Location: Montreal	If you are interest, I remember I have a TM MK23 holster OD color. It fit with the LAM unit and silencer, only missing the clip between the femele pin and velcro. (I think it could be...2$ or you do like me and don't care because the pistol fit perfecly and never pull out the holster). MP me if you are interest.

September 26th, 2012, 10:45	#14
vink Trader rating Join Date: Dec 2005 Location: Toronto	I have a Blackhawk Industries Left hand drop leg holster for the mk23. I bought it years ago and it's in great shape. I would sell it but I just got a kwa mk23.

September 26th, 2012, 12:25	#15
dice Trader rating Join Date: Aug 2011 Location: White Rock, B.C.	I have the G-code standard holster for my KWA MK23 and it is perfect! Highly recommended. With no adjustments it also fits a G18c AEP (for Winter) With a little adjustments it WILL fit a TM Mk23. Got mine from AirsoftGI with a belt loop. Also, I run it on a molle black hawk platform for a battle belt. I found that two out of three screw holes line up perfectly. Which is enough to keep it very secure. Use some locktite.

TM MK23 Holster

Gear Discussion