Removing 'Blue Gasket Maker' from magazines?

Strelok · January 10th, 2012, 23:14

Anyone know of an effective method to completely remove dried gasket maker within a magazine? I fucked up on one of my luger magazines and have to reseal it. Just curious if there is a quick and easy effective to remove it,

Thanks!

Ballcancer · January 10th, 2012, 23:49

as far as I know not really... kinda just have to keep picking at it.. fortunatly it likes to come off in huge chunks.. as for the little stuff.. gotta pick at it.

Mitchell12 · January 10th, 2012, 23:50

Razor blade would be my weapon of choice. That's what I use on engine parts, never had to remove it from a mag though.

HKGhost · January 10th, 2012, 23:56

My method is to scrape off as much as I can. Then I spray it with Goo Gone and let it site for a few hours. After it will be much easier to scrape the rest off.

Gunk · January 11th, 2012, 01:05

Flat head screwdriver... dental picks... wire brush... file...

It'll suck, and take a little while to get everything off, just keep scraping.

coach · January 11th, 2012, 06:56

Dremel + small brass wheel/brush. But you need to be careful that you don't gouge the metal.

Otherwise, small xacto knife, flat head screwdriver and a dental pick.

Btw, I don't bother getting it completely clean. On the one or two I've had to redo, I just removed as much as I could. If there's a thin spot where it's stuck on good, just scratch it up a bit and make sure anything loose is pulled off then reapply. I found if its hard to get off, it's likely because there are scratches in the metal that it's grabbing onto.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 10th, 2012, 23:14	#1
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Removing 'Blue Gasket Maker' from magazines? Anyone know of an effective method to completely remove dried gasket maker within a magazine? I fucked up on one of my luger magazines and have to reseal it. Just curious if there is a quick and easy effective to remove it, Thanks!

January 10th, 2012, 23:49	#2
Ballcancer Trader rating Join Date: Oct 2009 Location: Gravenhurst, ON	as far as I know not really... kinda just have to keep picking at it.. fortunatly it likes to come off in huge chunks.. as for the little stuff.. gotta pick at it. __________________

January 10th, 2012, 23:56	#4
HKGhost Trader rating Join Date: Nov 2009 Location: Mississauga, ON	My method is to scrape off as much as I can. Then I spray it with Goo Gone and let it site for a few hours. After it will be much easier to scrape the rest off. __________________ Please email me as I'm not on ASC too often. Custom Build \| Upgrades \| Repairs \| Maintenance Contact: ghostgunwork@gmail.com / Private Message Last edited by HKGhost; January 11th, 2012 at 00:20..

January 11th, 2012, 01:05	#5
Gunk In his Trunk! Trader rating Join Date: Aug 2004 Location: Mostly Canada	Flat head screwdriver... dental picks... wire brush... file... It'll suck, and take a little while to get everything off, just keep scraping. __________________ "War must be, while we defend our lives against a destroyer who would devour all; but I do not love the bright sword for its sharpness, nor the arrow for its swiftness, nor the warrior for his glory. I love only that which they defend: the city of the Men of Numenor, and I would have her loved for her memory, her ancientry, her beauty, and her present wisdom. Not feared, save as men may fear the dignity of a man, old and wise." - J.R.R. Tolkien

January 11th, 2012, 06:56	#6
coach aka coachster Trader rating Join Date: Mar 2008 Location: T dot	Dremel + small brass wheel/brush. But you need to be careful that you don't gouge the metal. Otherwise, small xacto knife, flat head screwdriver and a dental pick. Btw, I don't bother getting it completely clean. On the one or two I've had to redo, I just removed as much as I could. If there's a thin spot where it's stuck on good, just scratch it up a bit and make sure anything loose is pulled off then reapply. I found if its hard to get off, it's likely because there are scratches in the metal that it's grabbing onto. Last edited by coach; January 11th, 2012 at 07:07..

Removing 'Blue Gasket Maker' from magazines?

Doctor's Corner