Leaking glock

Eeyore · February 25th, 2009, 19:26

Right but I take it its not normal for there to be a delayed reaction between the pulling of the trigger and the moving of the hammer. I'm gonna lube the hammer assembly again and see what happens.

Tex · February 25th, 2009, 19:28

there should be no delay. also Vondnik or DefCon 1 are gundocs maybe PM them see if you can take it to one of them.

CDN_Stalker · February 25th, 2009, 20:15

If you are at (or near) the Mill on Saturday, I'll take a look at it. I have SO much freakined experience with KSC Glocks it's scary, yet I still get baffled by issues at times. Does sound mostly like a lube issue though. If you have silly oil, put a few drops in around where the striker is between the hammer, and around the striker release (was pointed out above, on a different Glock though), and work the hammer back and forth to make the oil sink in. I've seen many GBBs that release gas after a shot get fixed this way, but never any that release gas after you rack the slide. If you rack the slide and the mag releases gas, then your hammer or trigger bar is fuct. Yet you say the hammer remains cocked when you pull the slide back and release it. I've seen some weird shit past years with KSC Glocks, including owner fuck ups. This one is new to me, I suspect it's not described well.

Eeyore · February 25th, 2009, 21:19

Unfortunately no, I have to work on Sunday. Perhaps the next time though. Although I do work on the south shore ar Best Buy. Feel free to drop in the best buy on taschereau st.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 25th, 2009, 20:15	#18
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	If you are at (or near) the Mill on Saturday, I'll take a look at it. I have SO much freakined experience with KSC Glocks it's scary, yet I still get baffled by issues at times. Does sound mostly like a lube issue though. If you have silly oil, put a few drops in around where the striker is between the hammer, and around the striker release (was pointed out above, on a different Glock though), and work the hammer back and forth to make the oil sink in. I've seen many GBBs that release gas after a shot get fixed this way, but never any that release gas after you rack the slide. If you rack the slide and the mag releases gas, then your hammer or trigger bar is fuct. Yet you say the hammer remains cocked when you pull the slide back and release it. I've seen some weird shit past years with KSC Glocks, including owner fuck ups. This one is new to me, I suspect it's not described well. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871 Last edited by CDN_Stalker; February 25th, 2009 at 20:18..

February 25th, 2009, 19:26	#16
Eeyore Suburban Gun Runner Trader rating Join Date: Jan 2009 Location: St Lambert, Quebec	Right but I take it its not normal for there to be a delayed reaction between the pulling of the trigger and the moving of the hammer. I'm gonna lube the hammer assembly again and see what happens.

February 25th, 2009, 19:28	#17
Tex Trader rating Join Date: Feb 2003 Location: Abbotsford, B.C.	there should be no delay. also Vondnik or DefCon 1 are gundocs maybe PM them see if you can take it to one of them.

February 25th, 2009, 21:19	#19
Eeyore Suburban Gun Runner Trader rating Join Date: Jan 2009 Location: St Lambert, Quebec	Unfortunately no, I have to work on Sunday. Perhaps the next time though. Although I do work on the south shore ar Best Buy. Feel free to drop in the best buy on taschereau st.

Leaking glock

Doctor's Corner