Custom Logo (pictures!)

[Dustball]

Well I can't find my other thread asking about logo's, but I made one last night on a sheet of clear plastic.






I think it turned out rather nice, what do you guys think?

[Amos]

Neat... Shoulda made a smaller one sideways to it fits inbetween the groves of the mag.

[spacemoose]

http://www.airsoftcanada.com/showthread.php?t=46868

nice logo.

[Dustball]

Hey wow... that would be the one I couldn't find...

I thought about making a smaller one, but i think that would just be too small.

[spacemoose]

Originally Posted by Dustball

Hey wow... that would be the one I couldn't find...

I thought about making a smaller one, but i think that would just be too small.

Click on your name above your avatar. From there you can click on a box that says "find more posts" Thats how I found it.

[Syn]

So this is done with exacto knife then spray paint?

[Dustball]

Originally Posted by spacemoose

Click on your name above your avatar. From there you can click on a box that says "find more posts" Thats how I found it.

Hey thanks for the tip! I never knew that!

Originally Posted by Syn

So this is done with exacto knife then spray paint?

Yup, it took me a while to get the right one drawn on the plastic as you can see.

[Drake]

If you want really crisp contours, use the logo you just made as a guide to cut out masking tape (although the clear plastic might be a bit fragile, but you could always glue it onto something a bit heavier)