Charging a AEP battery with a tlp ???

zone 69 · January 12th, 2007, 16:27

Charging a AEP micro 200mha battery with a TLP tl 15 1-15 cell charger. Just like to know if this can be done. If i slow charge it only and put it on the lowest setting of 0.5A. Will this charge the battery or just reck it. Any info on this would be helpful. THANK,S .

Gryphon · January 12th, 2007, 19:16

It will work but you'll need to be careful with it. A one hour fast charge on that battery would require only 0.2A so you're more than doubling the recommended current feed. On one hand they're NiCd cells so they take abuse better, on the other hand they're generic industrial Cadnicas as opposed to racing-bred high capacity cells and probably don't like charge rates that high.

Set it to 6 cells and go. Monitor temperature and make sure it doesn't charge any longer than 20 minutes. Expect a noticable spike in your discharge characteristics but shortened battery life if you continue to use 0.5A. If you toast it, extras are cheap enough from eHobbyAsia.

zone 69 · January 12th, 2007, 20:32

Thank,s for the info. Im just looking for a better way to charge the battery than the wall charger that came with the AEP. I seen the BOL micro battery charger but i think it,s the same as the wall charger that came with the AEP.

nic_s · January 12th, 2007, 20:52

Ya it'll be fine, I do it all the time.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 12th, 2007, 16:27	#1
zone 69 Trader rating Join Date: Sep 2006 Location: KELOWNA , B.C CANADA, PLANET EARTH	Charging a AEP battery with a tlp ??? Charging a AEP micro 200mha battery with a TLP tl 15 1-15 cell charger. Just like to know if this can be done. If i slow charge it only and put it on the lowest setting of 0.5A. Will this charge the battery or just reck it. Any info on this would be helpful. THANK,S . Last edited by zone 69; February 10th, 2007 at 00:42..

January 12th, 2007, 20:32	#3
zone 69 Trader rating Join Date: Sep 2006 Location: KELOWNA , B.C CANADA, PLANET EARTH	Thank,s for the info. Im just looking for a better way to charge the battery than the wall charger that came with the AEP. I seen the BOL micro battery charger but i think it,s the same as the wall charger that came with the AEP. Last edited by zone 69; January 12th, 2007 at 20:37..

January 12th, 2007, 20:52	#4
nic_s Trader rating Join Date: Oct 2004 Location: BC	Ya it'll be fine, I do it all the time. __________________ ...and she's terribly partial to the periwinkle blue.

January 12th, 2007, 19:16	#2
Gryphon Trader rating Join Date: Mar 2005 Location: MB	It will work but you'll need to be careful with it. A one hour fast charge on that battery would require only 0.2A so you're more than doubling the recommended current feed. On one hand they're NiCd cells so they take abuse better, on the other hand they're generic industrial Cadnicas as opposed to racing-bred high capacity cells and probably don't like charge rates that high. Set it to 6 cells and go. Monitor temperature and make sure it doesn't charge any longer than 20 minutes. Expect a noticable spike in your discharge characteristics but shortened battery life if you continue to use 0.5A. If you toast it, extras are cheap enough from eHobbyAsia.

Charging a AEP battery with a tlp ???

Airsoft Guns Discussion