|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
May 14th, 2018, 07:54
|
#1 |
|
Ares striker mod thread
So I did some searching and I couldn't find a thread with striker owners. I just wanna see what everyone is doing to their strikers other than just slapping an uber edgi kit on.
For me I'm mainly stock with a pink maple leaf autobot bucking and I shaved off the stock built in nub and placed a custom cut flat nub. Shooting 1.8j on .38 +/- 1fps |
|
|
|
|
May 14th, 2018, 08:49
|
#2 |
|
I'm currently using mine for CQB. Shoved a M90 into it (so it shoots like ~350).
Other than that I put a Barska 1-4x short dot onto it. My planned things to do include a chrome/carbon fiber short barrel (310mm) with the same length inner. I'll also put a flat bucking / nub into it when I do that short barrel mod. I plan to use this as a CQB meme, so I'm not putting that EDGI kit into it.
__________________
VFC HK416C Crushed Orchid - VFC SR16 BCM ZTW TM G17 Loki Tactical Pink - TM G19 TTI Combat Master |
|
|
|
|
June 9th, 2018, 00:47
|
#3 |
|
I have an action army hop Up and inner, barrel spacers. Laylax bucking. Madbull m150
__________________
-Dangerous- BA Level 3 Certified |
|
|
|
|
June 30th, 2018, 03:12
|
#4 |
|
- ED1 Cylinder (sorbo on the cylinder head) + Trigger kit
- Maple Leaf Autobot, 60ยบ - Stock Hop, with teflon taped Maple Leaf hop arm (Type B) - Stock Spring, doing about 278fps +- 1.5 fps with 0.3g, (Indoor setup, since I mainly play indoors) - 2 part expanding foam barrel "spacer" - Short barrel + CJ inner It's all sorts of fun indoors with a short barrel setup, plus you can slap a suppressor on pretty easily without going excessively long. |
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
