Ares striker

[DENZILDON]

There's a couple that had issues about the slam firing but it's easily resolved by adjustments and minor tech work. That vid is pretty much a way to push the elit force striker version.

Man, so many propaganda videos on this sniper rifle and yet actual users that I've seen are having fun with it with just a hop up rubber and spring upgrade.

[DENZILDON]

Originally Posted by ThunderCactus

Now this gun is probably built better than their MSR338 internally, I have one but haven't had a chance to take it apart yet.
I could have made the shitbox MSR 338 on par with any other 400ft bolt action out there, it's REALLY not difficult for me to make a bolt action accurate.
The only thing the striker is going to fall short of a VSR on is the muzzle energy. But I've got some plans and I'll let you all know how it turns out...

Nice to see familiar names! Hey, join us on the fb page for striker owners. Lots of info and mods, it may help you with your plans.

[BobbyDangerous]

Originally Posted by DENZILDON

There's a couple that had issues about the slam firing but it's easily resolved by adjustments and minor tech work. That vid is pretty much a way to push the elit force striker version.

Man, so many propaganda videos on this sniper rifle and yet actual users that I've seen are having fun with it with just a hop up rubber and spring upgrade.

It's probably because of the sear adjustment. People are adjusting them too low. I know out of the box you want to bring it down a tad so it is not scraping the bolt. I did but I lock tight it after.

[BobbyDangerous]

Originally Posted by DENZILDON

There's a couple that had issues about the slam firing but it's easily resolved by adjustments and minor tech work. That vid is pretty much a way to push the elit force striker version.

Man, so many propaganda videos on this sniper rifle and yet actual users that I've seen are having fun with it with just a hop up rubber and spring upgrade.

I swapped it for a modify 70* VSR10 hop up. I posted a pic
Of mine on the Amoeba striker Facebook page. It's my first bolt action. I fell in love with it after learning about the Mag feed and just the shape of it.

[DENZILDON]

Originally Posted by BobbyDangerous

It's probably because of the sear adjustment. People are adjusting them too low. I know out of the box you want to bring it down a tad sonots not scraping the bolt. I did but I lock tight it after.

Yup!

If the mancraft gas kit reviews are good, let's see if stores can keep these guns in stock. We'll see in a couple of weeks.

[dimoes]

@Tuzi: There is a new Amoeba Striker buttpad. Not sure if it's has rubber

Sent from my Nexus 6P using Tapatalk

[Tuzi]

Originally Posted by dimoes

@Tuzi: There is a new Amoeba Striker buttpad. Not sure if it's has rubber

Sent from my Nexus 6P using Tapatalk

Oooh? Who's got it? Now I gotta do some searching. Thanks for the fyi.

[DENZILDON]

Reposting here for those users that's not on the fb page.

So did the teflon mod, credit card mod, 90 degree, shim, installed m150, cut the bridge, installed maple leaf hop up and grinded the pins on the bolt.

Shot through the edge of a Coke can and almost went through top Coke can middle.
Bolt return is good as well but I still have to do the cylinder polish mod.

For a cost of spring and hopup. That's amazing! Easiest gun I worked on.

[ThunderCactus]

Going to see if I can make new cylinder guides for mine. The amount of loose in the cylinder is comparable to the snow wolf M24. Pretty terrible.
Haven't had much time to work on it though. Been busy with some other pants dropping projects lol

WELL totally different design, I'd need a whole new plastic sleeve to fix it. That idea was short lived.
Either way, shooting 1.81j with no mods. Threw an Rhop in it. We'll see how it does.

[Chlorum]

As I understand, Striker isn't a replica of some real rifle, is it?

[DENZILDON]

Originally Posted by Chlorum

As I understand, Striker isn't a replica of some real rifle, is it?

Yup

[jomor]

Can anyone tell me what the length of the inner barrel is? It's VSR compatible barrel right?

[dimoes]

It looks a little like the Magpul Hunter 700 Stock Remington




Sent from my Nexus 6P using Tapatalk

[dimoes]

Is there a list somewhere that lists what mods are possible and what benifits they bring?

Sent from my Nexus 6P using Tapatalk

[BobbyDangerous]

Originally Posted by jomor

Can anyone tell me what the length of the inner barrel is? It's VSR compatible barrel right?

Think 575mm don't quote me on that.