This is PolarStar Thread

Cobrajr122 · September 9th, 2012, 17:23

So I know there are at least a few guys on here with P* FEs in their guns, and probably a bunch more once the V3 FEs come out.

I took the G&P M16 that I won at Rhino 2 and dropped an FE in. The install was simple as shit and I only had one problem. I had to put a piece of shrink wrap on the selector plate so that it would engage auto. The switch from the stock blue nozzle to the gold one only took a few mins to do too.

I took her outside for a test, lowered the settings as low as they would go with the FCU and got 6.5 RPS, I then brought them up as high as they would go and still have the mag feed and the chrono would not read it. Lowered it down a bit and clocked it shooting 38.9 RPS. Through all the readings I was getting a consistent ~365 FPS (0.25g) @110 Psi w/ gold nozzel

Its a freaking laser!

This thing is LOUD!! and I love it! lol
I want to get a firepig on it and get it even louder.

I tried screwing on a 100mm foam filled suppressor I had lying around and it actually made a BIG difference in the sound. This is the only rifle I have that a suppressor actually works on. I tried to capture the difference in sound with my camera but it just was not doing it close up, I'll have to wait until I can get somebody to stand downrange to record it :P
I also want to see if a longer suppressor will work better.

The hopup unit/rubber that came with the rifle suck, so I have a new unit, rubber, and TB coming in, I can't wait to test it with those parts.

I have the FE for the Echo1 M240 coming in the mail so hopefully I can get that installed and tested within the next 2 weeks.

lt_poncho · September 9th, 2012, 19:51

Polar Star - GAS is back on the menu! Awesome isn't it? I've got mine in my older MP5SD6. Need to find a better SD silencer than the TM one.

Spike · September 9th, 2012, 19:56

How much do they run? I'm not at all familiar with HPA tanks as I never did the paintball thing, are they a pain to get/use/fill?

-=ArchAngel=- · September 9th, 2012, 20:22

Quote:

Originally Posted by Spike

How much do they run? I'm not at all familiar with HPA tanks as I never did the paintball thing, are they a pain to get/use/fill?

im not sure how a set up would work for airsoft, but i know that fills are VERY easy. Depending on your local paintball fields, airfills may be free.

Kwokwai · September 9th, 2012, 20:42

Quote:

Originally Posted by lt_poncho

Polar Star - GAS is back on the menu! Awesome isn't it? I've got mine in my older MP5SD6. Need to find a better SD silencer than the TM one.

Hey Wayne,

What mods did you have to do to fit it into the SD?

Cobrajr122 · September 9th, 2012, 21:02

Quote:

Originally Posted by Spike

How much do they run? I'm not at all familiar with HPA tanks as I never did the paintball thing, are they a pain to get/use/fill?

The air rig is shit simple. The local PB field near me does fills of any size tank for $8

The V2 drop in was recently MAPd to $450, nozzles are $18. Air rigs will vary in price depending on what you get.

Cobrajr122 · September 22nd, 2012, 17:00

I found out recently that the foam filled suppressors actually work VERY well with these drop ins.

Here is mine with a 110mm foam insert tube. In the future I want to see how a longer tube and high density foam will effect it.

Sorry for the horrid quality, I don't have the best video camera.

Surpressor vs not - P* M16 90 Psi - YouTube

Cliffradical · September 22nd, 2012, 18:06

Yup, this looks like the best option for building an SD lover's SD6.

Cobrajr122 · November 16th, 2012, 18:35

Getting ready for a game this weekend, making sure I was at the right PSI for chroney, decided to test my new mags and see if they could keep up.

@80Psi, blue nozzle, 0.25g bastards.

Slow · November 16th, 2012, 18:48

*twitch*

Forever_kaos · February 21st, 2013, 15:12

Putting in an order for one today! Going to throw it into my STG

Should be here 2-3 weeks ~ish.

How's the M240 going for you?

Forever_kaos · March 10th, 2013, 04:27

Just finished getting mine installed in the STG!

Just a dirty quick pic.

Awaiting my air tanks and line to come in sometime this week. Huge shout out to Jeff @ Capital Airsoft for getting this in!

Next step... R-Hop!

NVC · March 10th, 2013, 17:52

My PolarStar V2-V3, Rhop. Have any of you guys tried the Orga 6.23 yet? I am thinking about that trying that out next.

Kimbo · March 11th, 2013, 00:17

Hey CobraJr, did you ever put one in your 240?

I was thinking of switching my trigger happy 240 over and was looking for some feedback.

Wolfgeorge · March 12th, 2013, 16:08

SG Barrett M82 with a modified FE V2

Wolf

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 9th, 2012, 17:23	#1
Cobrajr122 2 Cent Tactical Trader rating Join Date: Apr 2006 Location: NB	This is PolarStar Thread So I know there are at least a few guys on here with P* FEs in their guns, and probably a bunch more once the V3 FEs come out. I took the G&P M16 that I won at Rhino 2 and dropped an FE in. The install was simple as shit and I only had one problem. I had to put a piece of shrink wrap on the selector plate so that it would engage auto. The switch from the stock blue nozzle to the gold one only took a few mins to do too. I took her outside for a test, lowered the settings as low as they would go with the FCU and got 6.5 RPS, I then brought them up as high as they would go and still have the mag feed and the chrono would not read it. Lowered it down a bit and clocked it shooting 38.9 RPS. Through all the readings I was getting a consistent ~365 FPS (0.25g) @110 Psi w/ gold nozzel Its a freaking laser! This thing is LOUD!! and I love it! lol I want to get a firepig on it and get it even louder. I tried screwing on a 100mm foam filled suppressor I had lying around and it actually made a BIG difference in the sound. This is the only rifle I have that a suppressor actually works on. I tried to capture the difference in sound with my camera but it just was not doing it close up, I'll have to wait until I can get somebody to stand downrange to record it :P I also want to see if a longer suppressor will work better. The hopup unit/rubber that came with the rifle suck, so I have a new unit, rubber, and TB coming in, I can't wait to test it with those parts. I have the FE for the Echo1 M240 coming in the mail so hopefully I can get that installed and tested within the next 2 weeks. __________________ www.2centtac.com F i n d - a n - A g e - V e r i f i e r

September 9th, 2012, 19:51	#2
lt_poncho Trader rating Join Date: Sep 2002 Location: GTA	Polar Star - GAS is back on the menu! Awesome isn't it? I've got mine in my older MP5SD6. Need to find a better SD silencer than the TM one. __________________ 86 Tactics Change.

September 9th, 2012, 19:56	#3
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	How much do they run? I'm not at all familiar with HPA tanks as I never did the paintball thing, are they a pain to get/use/fill? __________________ I change primaries like other people change socks.

September 22nd, 2012, 17:00	#7
Cobrajr122 2 Cent Tactical Trader rating Join Date: Apr 2006 Location: NB	I found out recently that the foam filled suppressors actually work VERY well with these drop ins. Here is mine with a 110mm foam insert tube. In the future I want to see how a longer tube and high density foam will effect it. Sorry for the horrid quality, I don't have the best video camera. Surpressor vs not - P* M16 90 Psi - YouTube __________________ www.2centtac.com F i n d - a n - A g e - V e r i f i e r

September 22nd, 2012, 18:06	#8
Cliffradical butthurt for not having a user title Trader rating Join Date: Jun 2010 Location: Winnipeg	Yup, this looks like the best option for building an SD lover's SD6.

November 16th, 2012, 18:35	#9
Cobrajr122 2 Cent Tactical Trader rating Join Date: Apr 2006 Location: NB	Getting ready for a game this weekend, making sure I was at the right PSI for chroney, decided to test my new mags and see if they could keep up. @80Psi, blue nozzle, 0.25g bastards. __________________ www.2centtac.com F i n d - a n - A g e - V e r i f i e r

November 16th, 2012, 18:48	#10
Slow Loves Furries Trader rating Join Date: Oct 2009 Location: Manitoba	twitch __________________ If ASC were real life, there would be no Chuck Norris, only CDN_Stalker MANITOBA IVAN

February 21st, 2013, 15:12	#11
Forever_kaos Trader rating Join Date: Oct 2006 Location: Mississauga.	Putting in an order for one today! Going to throw it into my STG Should be here 2-3 weeks ~ish. How's the M240 going for you? __________________ Johann Hansen. 1./SS-Pz-Gren. Rgt. 20. 9th SS Hohenstaufen. Ontario's Largest WW2 re-enactment. OP Woodsman. Join us! Last edited by Forever_kaos; February 21st, 2013 at 15:26..

March 10th, 2013, 04:27	#12
Forever_kaos Trader rating Join Date: Oct 2006 Location: Mississauga.	Just finished getting mine installed in the STG! Just a dirty quick pic. Awaiting my air tanks and line to come in sometime this week. Huge shout out to Jeff @ Capital Airsoft for getting this in! Next step... R-Hop! __________________ Johann Hansen. 1./SS-Pz-Gren. Rgt. 20. 9th SS Hohenstaufen. Ontario's Largest WW2 re-enactment. OP Woodsman. Join us!

March 10th, 2013, 17:52	#13
NVC Trader rating Join Date: Jul 2009 Location: Edmonton	My PolarStar V2-V3, Rhop. Have any of you guys tried the Orga 6.23 yet? I am thinking about that trying that out next. __________________ Custom Kydex Holsters - pm me for details

March 11th, 2013, 00:17	#14
Kimbo formerly pivot Trader rating Join Date: Dec 2004 Location: Calgary	Hey CobraJr, did you ever put one in your 240? I was thinking of switching my trigger happy 240 over and was looking for some feedback. Last edited by Kimbo; March 12th, 2013 at 16:14..

March 12th, 2013, 16:08	#15
Wolfgeorge Trader rating Join Date: Mar 2011 Location: Greece	SG Barrett M82 with a modified FE V2 Wolf __________________ Asahi WA2000 DX

This is PolarStar Thread

Airsoft Media