Double Sided Adhesive Tape?

Styrak · July 8th, 2009, 22:41

Tape to hold a vertical grip?

Won't work at ALL.

S.Fisher · July 8th, 2009, 22:53

Canadian Tire sells it.. Thats where i buy mine

Malice Army · July 9th, 2009, 10:59

No room to drill holes into the Mac 11, and I wouldn't want to seperate the halves of this gun. This thing is the same size as a pistol, its not a full size assault rifle.
The epoxy works great, takes about 12 hours to dry but is hard as steel when it does, when you squeeze the rail on use an elastic to hold in place and make sure to clean any epoxy that maybe where you don't want it, easy to clean with a qtip when wet, you'll need a grinder when it drys.
check to make sure the spacing is correct to slide accessories on and off, I remove the metal sling attachement from mine because it got it the way and I hated the way it moved around. And while in the automotive section grab a can of NON METAL Primer and a can of flat black tremclad paint.
Here s another tip, mask off the front of the grip so it stays clear and you can see how much ammo is still in the magazine with a quick look.

Malice Army · July 9th, 2009, 11:15

Quote:

Originally Posted by Styrak

Tape to hold a vertical grip?

Won't work at ALL.

why do you jump on peoples threads and just smash and flame peoples ideas, this isn't the first thread I've seen you do this. Do you have an alternative? Have you tried this before? Anything constructive to say...
I guess because you are a "retailer" you can or say whatever you want

ujiro · July 9th, 2009, 11:26

He was stating the obvious. Tape will definitely 100% not hold a rail on, especially not with a vert grip. Epoxy is indeed the best idea, or drilling a hole, tapping it, and screwing the rail on.

He doesn't just jump on peoples threads or flame them. Sometimes people need a little bit of a kick in the butt to realize an idea is silly.

Malice Army · July 9th, 2009, 12:38

If you don't have anything constructive to say why post?

jtf2-phalanx · July 9th, 2009, 12:38

Quote:

Originally Posted by ujiro

He was stating the obvious. Tape will definitely 100% not hold a rail on, especially not with a vert grip. Epoxy is indeed the best idea, or drilling a hole, tapping it, and screwing the rail on.

He doesn't just jump on peoples threads or flame them. Sometimes people need a little bit of a kick in the butt to realize an idea is silly.

It's true he was only stating the obvious but I think there was enough solutions given in the thread not to warrant such an abrupt and, not so helpful, comment.

Grudge · July 9th, 2009, 13:55

I agree with Malice Army, there are way too many "It won't work" or "Stupid Idea" remarks without offering a viable alternative. If you're not offering a solution let the person find out for themselves.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 8th, 2009, 22:41	#16
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Tape to hold a vertical grip? Won't work at ALL. __________________ Airsoft Sales and Repair/Upgrade Services

July 8th, 2009, 22:53	#17
S.Fisher Trader rating Join Date: Feb 2009	Canadian Tire sells it.. Thats where i buy mine __________________

July 9th, 2009, 10:59	#18
Malice Army Trader rating Join Date: Jun 2008 Location: St. Catharines ON	No room to drill holes into the Mac 11, and I wouldn't want to seperate the halves of this gun. This thing is the same size as a pistol, its not a full size assault rifle. The epoxy works great, takes about 12 hours to dry but is hard as steel when it does, when you squeeze the rail on use an elastic to hold in place and make sure to clean any epoxy that maybe where you don't want it, easy to clean with a qtip when wet, you'll need a grinder when it drys. check to make sure the spacing is correct to slide accessories on and off, I remove the metal sling attachement from mine because it got it the way and I hated the way it moved around. And while in the automotive section grab a can of NON METAL Primer and a can of flat black tremclad paint. Here s another tip, mask off the front of the grip so it stays clear and you can see how much ammo is still in the magazine with a quick look. Last edited by Malice Army; July 9th, 2009 at 11:10..

July 9th, 2009, 11:26	#20
ujiro Trader rating Join Date: Aug 2006 Location: Burlington, ON	He was stating the obvious. Tape will definitely 100% not hold a rail on, especially not with a vert grip. Epoxy is indeed the best idea, or drilling a hole, tapping it, and screwing the rail on. He doesn't just jump on peoples threads or flame them. Sometimes people need a little bit of a kick in the butt to realize an idea is silly. __________________ I love freedom and consequently America

July 9th, 2009, 12:38	#21
Malice Army Trader rating Join Date: Jun 2008 Location: St. Catharines ON	If you don't have anything constructive to say why post?

July 9th, 2009, 13:55	#23
Grudge multitech Trader rating Join Date: Jul 2008 Location: with your girlfriend, playing with her P90.	I agree with Malice Army, there are way too many "It won't work" or "Stupid Idea" remarks without offering a viable alternative. If you're not offering a solution let the person find out for themselves. __________________ Nothing says loving, like a head shot!

Double Sided Adhesive Tape?

Upgrades & Modifications