Airsoft Canada
AirsoftParts.ca

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Wiring Questions

:

Upgrades & Modifications

Reply
 
Thread Tools
Old January 14th, 2019, 14:55   #1
ToeTag
 
ToeTag's Avatar
 
Join Date: Nov 2013
Location: Campbellford, Ontario
Wiring Questions

Hello all: Couple questions about wire.

Should I use 16 or 18 AWG

This description ok to use...it's tinted copper wire? Silver wiring is way way way more expensive but it must be done it must be done.

BNTECHGO 16 Gauge Silicone Wire
Super Flexible 252 Strands of 0.08 mm tinted copper wire - highly efficient.
Total 10 feet: 5ft Black and 5ft Red.(1 feet = 0.305m)
High Temperature Resistant Silicone Wire
Temp: -60 degree Celsius +200 degree Celsius
Rated Voltage: 600V

Should I be ok to go with this? I will be running 7.4 and 11.1 lipos

2nd question. 1 gun equal 10' of wire..(5 red/5 black)? Should I get 30' total for 3 guns? 15' of red - 15' of black.

Thanks fella's - any help would be greatly appreciated.
ToeTag is offline   Reply With Quote
Old January 14th, 2019, 17:06   #2
RainyEyes
- Professional Complainer who wants to do nothing to help out. QQer maximus, will QQ for Free. Snowflake exemplified.
 
RainyEyes's Avatar
 
Join Date: Sep 2013
Location: Scarbororororough
What are you wiring that requires 10 FEET of wiring?

I can easily get away with 2 feet per colour per gun depending if it's front or rear wired. And that's with rewiring the gearbox. Try to measure the length of the gun you're going to run the wire and add an inch or two for error, accounting for wiring in the gearbox..

Get copper it has very similar resistance to silver. Not worth the cost imo. It won't hurt your lipo or your motor the more important thing is to upgrade the piston and get good air seal.

Minor point but do not buy the wiring until you know the maximum width you're comfortable running through your gearbox. In my experience some of the crappier gearboxes barely have enough room for the fatter wires and will balloon when you try to close the gearbox.
__________________
I fix leaky/malfunctioning TM/ Clone M870's.
Send me a PM if your shotgun is giving you problems.
RainyEyes is offline   Reply With Quote
Old January 14th, 2019, 17:18   #3
ToeTag
 
ToeTag's Avatar
 
Join Date: Nov 2013
Location: Campbellford, Ontario
Ok great thanks for the info....
ToeTag is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
AirsoftParts.ca

All times are GMT -4. The time now is 17:10.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.