|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
November 30th, 2011, 22:51
|
#1 |
|
VFC M4 issue
Hello,
I am changing the spring on an M4 and I can not get the stock pipe off....the screw is impossible. Any suggestions?
__________________
 Kingston airsoft, we do it better. Last edited by Specs; November 30th, 2011 at 22:58.. |
|
|
|
November 30th, 2011, 22:56
|
#2 |
|
takagari
|
Ugh type?
There's usually a screw inside. You need a long Philips to stick down the tube from the end.
__________________
Eddie Creek, MB Airsoft Field, Valken Dealer, Local Age Verification [COLOR="DarkOrange"][B] |
|
|
|
|
November 30th, 2011, 22:58
|
#3 |
|
|
Edit....im amazing, kinda like red green, anyway I foud a way to get it out thanks for the reply!
__________________
Kingston airsoft, we do it better. |
|
|
|
|
November 30th, 2011, 23:16
|
#4 | |
|
Quote:
The power wires also have tiny bullet connectors that need to be separated before you pull the mech box out of the receiver. Last edited by SuperHog; November 30th, 2011 at 23:19.. |
|
|
|
|
|
November 30th, 2011, 23:58
|
#5 |
|
|
Ya that helped! I have it down to the gearbox now, should be a breeze. The ambi mag catch is a stupid gimic and it was 30 mins of tinkering with it to get it to come out
__________________
Kingston airsoft, we do it better. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
