Sniper Rifle Misfeed

venture · March 25th, 2012, 20:05

I have had this problem before and could not fix it. Now I just sold a sniper rifle with the same defect.

When the bolt is cycled the magazine kicks out and won't feed.

Anyone cure this issue before.

CDN_Stalker · March 25th, 2012, 22:14

What rifle (sounds like a CA M24)? And does it feed properly when you press the mag in and cycle the bolt? If so, I have a 'fix' for it.

venture · March 25th, 2012, 22:21

That is exactly the problem, you can use the rifle if you wrap your hand around the stock and mag together and push the mag up. The rifle is a VSR10 clone.

Drakker · March 26th, 2012, 09:16

Remove the stock and screw the front screw first, this should align the feeding part of the mag with the hop up better... but this is no guarantee it will fix it. The Well clones pretty much all do it and unless you can find a new stock there's not much that can be done. Also, putting less BBs in the mag helps a bit, when the mag is full the spring tension is greater and makes the magazine eject more often.

venture · March 26th, 2012, 10:22

Thanks. I will try it and let you know.

S_Okita · March 26th, 2012, 15:34

I have a vsr 10 clone that would do that same thing very intermitently i fixed it by shimming up the mag catch relief on the mag itself with a little plastic to make it sit higher on the mag catch (the bb was just too low to get grabbed by the cylinder head and be pushed into the houp.) I was using a bravo vsr with "acm" vsr mags...

CJay · March 27th, 2012, 12:01

I had this very issue with my vsr. The fix is actually pretty simple. As the bb moves up there's an almost cup shaped guide that makes is shift forward and hold in place. In mine the bb was falling back slightly and the bb behind was pushing half into the chamber so they were jamming very effectively until I released the mag and apply a little pressure as the bolt shifted forwards.

Basically the fix is to simply deepen te cup slightly so the bb doesn't shift as it hits the guide holder. How did I achieve this? pushed a Phillips screwdriver into the cup shape and applied pressure as I twisted it to hollow out the hole slightly. I've done this on 7 vsr clones that have the same issue and none have had a problem since

It's worth mentioning that all of em had the laylax aero pss10 hop unit in them.

I guess all ur really doing is making the bbs shift slightly further into the chamber.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 25th, 2012, 20:05	#1
venture Trader rating Join Date: Jun 2005 Location: Halifax	Sniper Rifle Misfeed I have had this problem before and could not fix it. Now I just sold a sniper rifle with the same defect. When the bolt is cycled the magazine kicks out and won't feed. Anyone cure this issue before. __________________ Visit us at :www.ventureairsoft.ca

March 25th, 2012, 22:14	#2
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	What rifle (sounds like a CA M24)? And does it feed properly when you press the mag in and cycle the bolt? If so, I have a 'fix' for it. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

March 25th, 2012, 22:21	#3
venture Trader rating Join Date: Jun 2005 Location: Halifax	That is exactly the problem, you can use the rifle if you wrap your hand around the stock and mag together and push the mag up. The rifle is a VSR10 clone. __________________ Visit us at :www.ventureairsoft.ca

March 26th, 2012, 09:16	#4
Drakker Official ASC Geomorphologist Trader rating Join Date: Sep 2009 Location: Montr?al south shore, Qc	Remove the stock and screw the front screw first, this should align the feeding part of the mag with the hop up better... but this is no guarantee it will fix it. The Well clones pretty much all do it and unless you can find a new stock there's not much that can be done. Also, putting less BBs in the mag helps a bit, when the mag is full the spring tension is greater and makes the magazine eject more often. __________________ Keep quiet. Sound travels faster than BBs. Québec province's master age verification representative.

March 26th, 2012, 10:22	#5
venture Trader rating Join Date: Jun 2005 Location: Halifax	Thanks. I will try it and let you know. __________________ Visit us at :www.ventureairsoft.ca

March 26th, 2012, 15:34	#6
S_Okita Trader rating Join Date: Jul 2011 Location: Whitby, On	I have a vsr 10 clone that would do that same thing very intermitently i fixed it by shimming up the mag catch relief on the mag itself with a little plastic to make it sit higher on the mag catch (the bb was just too low to get grabbed by the cylinder head and be pushed into the houp.) I was using a bravo vsr with "acm" vsr mags...

March 27th, 2012, 12:01	#7
CJay Trader rating Join Date: Oct 2008 Location: Belle River, ON	I had this very issue with my vsr. The fix is actually pretty simple. As the bb moves up there's an almost cup shaped guide that makes is shift forward and hold in place. In mine the bb was falling back slightly and the bb behind was pushing half into the chamber so they were jamming very effectively until I released the mag and apply a little pressure as the bolt shifted forwards. Basically the fix is to simply deepen te cup slightly so the bb doesn't shift as it hits the guide holder. How did I achieve this? pushed a Phillips screwdriver into the cup shape and applied pressure as I twisted it to hollow out the hole slightly. I've done this on 7 vsr clones that have the same issue and none have had a problem since It's worth mentioning that all of em had the laylax aero pss10 hop unit in them. I guess all ur really doing is making the bbs shift slightly further into the chamber. __________________ "Creator of the Zombat Sniper - oh yeah baby" Last edited by CJay; March 27th, 2012 at 12:05..

Sniper Rifle Misfeed

Doctor's Corner