|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 27th, 2016, 18:46
|
#1 |
|
wobbly upper and lower?
This project is hitting almost every possible problem imaginable. so here is the latest problem:
I got a set of upper and lower receiver, by Daniel Defense logo on them. All the sets I have seen has either the rabbit ears coming out of upper and goes into lower OR the back of upper has a part sticking out which slides into lower. It is not the case with the upper and lower that I got in my possession !!! Instead there are these tiny holes at the back of upper that aligns with similar holes on the lower. I am correct to assume something is suppose to go in these holes? If so what? where can I buy them? Here are the picture in case of interest: https://drive.google.com/drive/folde...ms?usp=sharing |
|
|
|
|
December 27th, 2016, 19:27
|
#2 |
|
Administrator
|
Looks like how Classic Army do it. There should be pins in the holes in the upper. Any small roll pin that fits will work.
__________________
ASC Age Verifier for Red Deer & Area Alberta |
|
|
|
|
December 27th, 2016, 19:47
|
#3 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
^ +1
|
|
|
|
|
December 27th, 2016, 20:36
|
#4 |
|
Classic army eh! thank you my friend, you are on the money
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
