Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Doctor's Corner > AEG Solutions
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

The "joys" (aka. trials) of being a gun doctor!

:

AEG Solutions

Reply
 
Thread Tools
Old March 2nd, 2013, 18:43   #76
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
that poor lonex motor.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old March 2nd, 2013, 19:03   #77
ccyg8774
 
ccyg8774's Avatar
 
Join Date: Jun 2012
Location: Brampton, ON
I made a mess when I was 8, soldering for the first time, and no adult help.
Still not nearly as bad as that.
__________________
ccyg8774 is offline   Reply With Quote
Old March 2nd, 2013, 19:22   #78
ScooterVauto
 
ScooterVauto's Avatar
 
Join Date: Jun 2010
Location: Edmonton
ya took a while to get hte solder out of the Spring coils but i did it and still works.. far as i know

Not lonex, stock or the like. THANK GOD
__________________
A single Light is all one needs to find their way through the darkness, But a single BB is all you need to bring it on!
==========
Im not worried about the Bullet that has my Name on it, Im worried about the bullet that says "to whom it may concern"
Lt. Alexander Washington -(Red Tails 1944) Ret.

Last edited by ScooterVauto; March 2nd, 2013 at 19:49..
ScooterVauto is offline   Reply With Quote
Old March 2nd, 2013, 19:45   #79
Aper
E-30
 
Aper's Avatar
 
Join Date: Jan 2004
Location: Aegiis's Neighbor.
I remember when I had my first M4 GBBR last year. I was trying to install my new Magpul trigger guard. Started punching out one of the pins out ... CLINK !

The lower body right underneath the trigger chipped off with the pin still in it. That's when I realised the pins were one-way pins.

OH GOD WHY ...
__________________

West Coast EOD Supporter. // Bang One, Bang Em All ! // In war, it's not who's right, but who's left.
Aper is offline   Reply With Quote
Old March 2nd, 2013, 20:50   #80
ccyg8774
 
ccyg8774's Avatar
 
Join Date: Jun 2012
Location: Brampton, ON
Quote:
Originally Posted by ScooterVauto View Post
ya took a while to get hte solder out of the Spring coils
Do you have a desoldering pump or silimar tools? If not then getting the solder out would be a pain...
__________________
ccyg8774 is offline   Reply With Quote
Old March 2nd, 2013, 22:39   #81
cetane
 
cetane's Avatar
 
Join Date: Jun 2010
Location: Markham & Stouffville - Ontario - Canada
Quote:
Not lonex, stock or the like. THANK GOD
Looks to me like a g&g motor
cetane is offline   Reply With Quote
Old March 3rd, 2013, 00:17   #82
ScooterVauto
 
ScooterVauto's Avatar
 
Join Date: Jun 2010
Location: Edmonton
Quote:
Originally Posted by ccyg8774 View Post
Do you have a desoldering pump or silimar tools? If not then getting the solder out would be a pain...
na it was heat it up and remove from motor with needle nose pliers.
heat the spring with soldering tool and tap pliers agianst hard surface.
repeat.... till all the solders gone..
the motor was easier LOL
__________________
A single Light is all one needs to find their way through the darkness, But a single BB is all you need to bring it on!
==========
Im not worried about the Bullet that has my Name on it, Im worried about the bullet that says "to whom it may concern"
Lt. Alexander Washington -(Red Tails 1944) Ret.
ScooterVauto is offline   Reply With Quote
Old March 5th, 2013, 03:44   #83
ScooterVauto
 
ScooterVauto's Avatar
 
Join Date: Jun 2010
Location: Edmonton
ok this is a new one to me..
we have all seen various axle damage, but how about this
note the "difference" in the axle Width


note the NUMBER of missing teeth


note the AMOUNT of material on the shell


Note the UNUSUAL shape of the bevel and spur gear lower bearings


note the LACK of the molded rings on the shell that is supposed to be around the spur and bevel gear bushings


Note the ONLY tooth i found in the box (its above the piston rails)
and the factory seal was intact..


aperantly it was dry fired ALOT, but that much damage??
Discuss.
__________________
A single Light is all one needs to find their way through the darkness, But a single BB is all you need to bring it on!
==========
Im not worried about the Bullet that has my Name on it, Im worried about the bullet that says "to whom it may concern"
Lt. Alexander Washington -(Red Tails 1944) Ret.

Last edited by ScooterVauto; March 5th, 2013 at 03:46..
ScooterVauto is offline   Reply With Quote
Old March 5th, 2013, 04:26   #84
ccyg8774
 
ccyg8774's Avatar
 
Join Date: Jun 2012
Location: Brampton, ON
Are those grooved steel bushings?
__________________
ccyg8774 is offline   Reply With Quote
Old March 5th, 2013, 04:37   #85
ScooterVauto
 
ScooterVauto's Avatar
 
Join Date: Jun 2010
Location: Edmonton
they look alot like modify dual oil channel bushings.
__________________
A single Light is all one needs to find their way through the darkness, But a single BB is all you need to bring it on!
==========
Im not worried about the Bullet that has my Name on it, Im worried about the bullet that says "to whom it may concern"
Lt. Alexander Washington -(Red Tails 1944) Ret.
ScooterVauto is offline   Reply With Quote
Old March 5th, 2013, 06:35   #86
HKGhost
 
HKGhost's Avatar
 
Join Date: Nov 2009
Location: Mississauga, ON
That's caused by bad shimming and having to turning up the motor height to compensate for it. Basically the bevel gear sat too high and so the motor had to be turned all the way up to engage the teeth, but it also pushed the gear up and out of place. Over time like this, the side pressure not only chewed up the axle but elongated the bushings. That's why you can see that the elongated bushings is inline where the motor is going up. I always tell people that you need to check the shimming when a new motor is installed, as not every motor are the same dimension. Everyone needs to recheck their shimming every time you change the pistol grip or motor cage, motor, gears, bushings/bearings and gearbox shell.
__________________
Please email me as I'm not on ASC too often.

Custom Build | Upgrades | Repairs | Maintenance
Contact: ghostgunwork@gmail.com / Private Message

Last edited by HKGhost; March 5th, 2013 at 06:44..
HKGhost is offline   Reply With Quote
Old March 8th, 2013, 11:06   #87
Stealth
Mr. Silencer
 
Join Date: Dec 2001
Location: Toronto
M170 spring + Siegeteks + VFC Stock ARL

Stealth is offline   Reply With Quote
Old March 8th, 2013, 20:22   #88
ScooterVauto
 
ScooterVauto's Avatar
 
Join Date: Jun 2010
Location: Edmonton
Quote:
Originally Posted by ccyg8774 View Post
Are those grooved steel bushings?
i have a set of new SRC bushings and they do have grooved oil channels.
so they are stock.
__________________
A single Light is all one needs to find their way through the darkness, But a single BB is all you need to bring it on!
==========
Im not worried about the Bullet that has my Name on it, Im worried about the bullet that says "to whom it may concern"
Lt. Alexander Washington -(Red Tails 1944) Ret.
ScooterVauto is offline   Reply With Quote
Old March 9th, 2013, 09:03   #89
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
dry firing does nothing.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old March 10th, 2013, 13:23   #90
Rusty Lugnuts
Fainting Goat, Dictator of Quinte West
 
Rusty Lugnuts's Avatar
 
Join Date: Nov 2011
Location: Cobourg Ontario
rebar Thompson fix- bet it doesn't break there again
Attached Images
File Type: jpg DSC_0412.JPG (1.88 MB, 84 views)
File Type: jpg DSC_0414.JPG (1.72 MB, 83 views)
Rusty Lugnuts is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner > AEG Solutions

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 03:58.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.