Airsoft Canada
BuyAirsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Ptw Gun Doc needed

:

Doctor's Corner

Reply
 
Thread Tools
Old October 2nd, 2018, 15:23   #1
Foxer2373
 
Join Date: May 2011
Location: Smith Falls ON
Ptw Gun Doc needed

Hey Guys, open to Gun docs or shops that can do the work.

Hoping to find someone between Ottawa and Kingston but will ship if needed.

Need battery connectors changed, would love if someone could order and install a mosfet for it, so I can run lipos instead.

Hop up needs to be reworked.

General tune up needed, motor are gears were aces last time I had it out.

Thanks for any info.
Foxer2373 is offline   Reply With Quote
Old October 2nd, 2018, 23:25   #2
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
It already has a mosfet, you can run 11.1v lipo on it stock
Use the turnigy nanotech 15-25C batteries

clean and regrease your cylinders, blow the dust out of the motors end bell, shouldn't have to touch the gearbox ever.
ThunderCactus is offline   Reply With Quote
Old October 3rd, 2018, 00:25   #3
mcguyver
 
mcguyver's Avatar
 
Join Date: Aug 2005
Location: Northern Alberta
Quote:
Originally Posted by ThunderCactus View Post
It already has a mosfet, you can run 11.1v lipo on it stock
Use the turnigy nanotech 15-25C batteries

clean and regrease your cylinders, blow the dust out of the motors end bell, shouldn't have to touch the gearbox ever.
You haven't seen Jonas's or Rob's gearboxes. They were awful. Think twigs, grass, sand, and lots of mineral deposits from water.

I think he has a Gen 3 gun with the older parallel FET system. Not the most stable with a constant voltage battery and newer motor type.
__________________
Age verifier Northern Alberta

Democracy is two wolves and a sheep discussing what's for dinner.

Freedom is the wolves limping away while the sheep reloads.

Never confuse freedom with democracy.
mcguyver is offline   Reply With Quote
Old October 3rd, 2018, 08:50   #4
Foxer2373
 
Join Date: May 2011
Location: Smith Falls ON
Mine a 2007 board if that helps.... still need the hop up done it is aweful.... damn you Az!!!

Yes motor and Gear box are all good.
Foxer2373 is offline   Reply With Quote
Old October 3rd, 2018, 11:53   #5
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Original 07 boards?? You may just wanna run it off the old NiCds lol
ThunderCactus is offline   Reply With Quote
Old October 3rd, 2018, 12:06   #6
Foxer2373
 
Join Date: May 2011
Location: Smith Falls ON
Lol I believe the whole thing is original 07 with Tack motor mods. I can try to posts some pics tonight. All my original Systema batteries are toast what should I run it off?
Foxer2373 is offline   Reply With Quote
Old October 8th, 2018, 11:44   #7
Foxer2373
 
Join Date: May 2011
Location: Smith Falls ON
Come on someone’s gotta wanna take this on..... pretty please lol.
Foxer2373 is offline   Reply With Quote
Old October 8th, 2018, 12:29   #8
mcguyver
 
mcguyver's Avatar
 
Join Date: Aug 2005
Location: Northern Alberta
If you want an electronics change, you need to change both boards. Pretty pricey if you want OEM. Clones are garbage, especially ECU, and the FET boards to a lesser extent.

I just did an upgrade to an older gun to ambi with the Value Kit 3. It came with ambi gearbox, Kumi motor and full electronics set. Was about $680 landed, the owner sold the motor, 2011 electronics and gearbox to get the latest items. Net for him was about $300 for parts after sale.

I have Fet boards, no ecu boards. If you get one, I can do it for you.
__________________
Age verifier Northern Alberta

Democracy is two wolves and a sheep discussing what's for dinner.

Freedom is the wolves limping away while the sheep reloads.

Never confuse freedom with democracy.
mcguyver is offline   Reply With Quote
Old October 8th, 2018, 12:46   #9
Foxer2373
 
Join Date: May 2011
Location: Smith Falls ON
I’m less worried about the Fet but I need the hop done, gonna be pricey no matter what shipping it down there and back I’m up in Ontario now lol. But hell I’d rather be able to run my ptw than buy a crap AEG for 500-800$ any day.
Foxer2373 is offline   Reply With Quote
Old October 8th, 2018, 13:11   #10
mcguyver
 
mcguyver's Avatar
 
Join Date: Aug 2005
Location: Northern Alberta
I wonder maybe if a Li-ion battery might be a better choice for you than Lipo. Nicad is no longer possible. But, the Li-ion is a nunchuck battery, won't fit in the buffer tube at 11.1v and 7.4v is not usable. So, if you keep it the crane stock, it is doable. Maybe pm me and I can source battery to fit, refit the gun in Deans, hopup mod and clean/regrease gearbox and cylinders.
__________________
Age verifier Northern Alberta

Democracy is two wolves and a sheep discussing what's for dinner.

Freedom is the wolves limping away while the sheep reloads.

Never confuse freedom with democracy.
mcguyver is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
BuyAirsoft

All times are GMT -4. The time now is 15:43.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.