Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

JG hk416 problem

:

Doctor's Corner

Reply
 
Thread Tools
Old February 23rd, 2010, 22:39   #1
spartan117
 
spartan117's Avatar
 
Join Date: Sep 2007
Location: Vancouver B.C
JG hk416 problem

I was going to test fire the JG hk416 to make sure everything was working properly before i rap it up to ship, but when i plugged the battery i hear a pop and when i pulled the trigger nothing happened. I unplugged the batt and reinserted it again then sparks started flying out everytime the factory installed mosfet made contact with the buffer tube. I checked the fuse and it was blown. Anyone know why this happened?? The battery i used came with the hk416 (9.6v 1500mah Ni-Cad battery) Some help please.

*If you read this Hellfire please contact me asap!!* thanks!
spartan117 is offline   Reply With Quote
Old February 25th, 2010, 15:25   #2
Ninja_En_Short
 
Ninja_En_Short's Avatar
 
Join Date: Jul 2007
Location: France, Canada (Montréal)
Send a message via MSN to Ninja_En_Short
Well... cheap chinese fuse inside. You're not the first one with that problem.

Do yourself a favor : get rid of it. Never used one, never had a problem either. You on the other side...
__________________
Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes...
I can do a CTRL+ATL+DEL on your gun !

Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring)
Heavy custom builder (including painting)

Ninja_En_Short is offline   Reply With Quote
Old February 25th, 2010, 15:41   #3
Sbradshaw
 
Join Date: Jan 2009
Location: Fort st John, BC
but by the sounds of it something is grounded out, and if you just remove the "safety" at this moment you could have some real problems!

i would start by pulling the mechbox and tracing the wires, check them with a fine toothed comb for and fraying, broken solder points, cuts in the wire etc. anything that doesnt look "perfect" could be your problem and may be a problem in the future.

there is still snow on the ground, good time to take it apart and make sure its running smooth anyway.
Sbradshaw is offline   Reply With Quote
Old February 25th, 2010, 15:50   #4
Bissa
 
Bissa's Avatar
 
Join Date: Mar 2007
Location: Kelowna, BC
Send a message via MSN to Bissa
you could bring it down to the TAC shop and have them take a look at it. actually being able to look at a problem is always better then having it described to you.
__________________
Quote:
Sergeant Gerry Boyle: I don't want to see it. Babies all look the same. The only time a baby doesn't look like every other baby is when it's a really ugly baby. So, unless it's a photo of a really ugly baby, I don't want to see it.
Bissa is offline   Reply With Quote
Old February 25th, 2010, 16:12   #5
spartan117
 
spartan117's Avatar
 
Join Date: Sep 2007
Location: Vancouver B.C
Quote:
Originally Posted by Bissa View Post
you could bring it down to the TAC shop and have them take a look at it. actually being able to look at a problem is always better then having it described to you.
Haha Yea I should. thanks!
spartan117 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 18:33.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.