Get M16 G&G Max to 400fps

Azrael_VM · May 16th, 2011, 23:53

I have a M16 G&G Max who shoot over 450fps with .20 bb's. But a lot of fields max fps is 400. So I want to lower my spring but I hesitate between 2 force. The M110 or the M113 made by PDI (the Matrix). Depending on the gun inner barrel's lenght and the spec of the G&G Max M16, someone know wich one will get me the nearest to 400fps without overpass it?

-Thanks

Steven · May 16th, 2011, 23:56

The M110 should net you around 350-380 FPS, but it all depends on your rifle's airseal and other components.

Azrael_VM · May 18th, 2011, 01:51

ok thanks for the tips, there is someone who have allready downgraded his G&G Max to 400fps who can confirm wich one of these 2 springs is the best to get close to 400 without overpass it?

yerfdoggnahc · July 17th, 2011, 10:34

i dont think the m110 is made by PDI. PDI measures their spring power by the percentage of 1 joule. whereas all the other springs are measured by the meter per second of the bb once projected. so, an m"110" is 110 meter per second , which is 360 fps. if it's 110% of 1 joule, it would be like 1.1 joule, which is roughly 320 fps.

If you DO want a PDI spring that gets u to 400 fps, try the 170%.

bomber439 · July 17th, 2011, 11:22

I have the G&G M16 RIS Max. I had a M120 spring installed at time of purchase in January. The gun was shooting 428 after that. I used this gun practically every week since then. It now cronoe's @ 410 to 418. Bare in mind that a new spring will lose some of its strength over time and use.

Bomber

Snowstorm45 · July 18th, 2011, 05:28

I have the same gun, just wondering, has anyone tried the spring that came with it to lower the velocity, what FPS does that give?

THEMAKKER13 · July 21st, 2011, 13:01

1 Joule is 328 fps, so 1.1 Joules is not 320 fps. I would recommend a Guarder M115 spring. I know I was getting 380 fps out of an M110 in my G&G Combat Machine and they would probably pretty similar so you have a reference.

lurkingknight · July 22nd, 2011, 10:04

G&G says the included spring drops it below 400 fps... I have the max m14, the manual says out of the box it's 485, we'll find out at the chrono this weekend how it compares, and then I'll put in the spring it came with and measure again next chance I get.

speedracer9220 · July 22nd, 2011, 20:00

I have a GR16 and just installed a m110 spring. I am now chroning between 390-403 fps with the hop adjusted.

THEMAKKER13 · July 22nd, 2011, 23:31

Yeah, for anyone who didn't know, hop up decreases velocity.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 16th, 2011, 23:53	#1
Azrael_VM Trader rating Join Date: May 2011 Location: Longueuil	Get M16 G&G Max to 400fps I have a M16 G&G Max who shoot over 450fps with .20 bb's. But a lot of fields max fps is 400. So I want to lower my spring but I hesitate between 2 force. The M110 or the M113 made by PDI (the Matrix). Depending on the gun inner barrel's lenght and the spec of the G&G Max M16, someone know wich one will get me the nearest to 400fps without overpass it? -Thanks

July 17th, 2011, 11:22	#5
bomber439 Trader rating Join Date: Aug 2009 Location: Red Deer, AB	I have the G&G M16 RIS Max. I had a M120 spring installed at time of purchase in January. The gun was shooting 428 after that. I used this gun practically every week since then. It now cronoe's @ 410 to 418. Bare in mind that a new spring will lose some of its strength over time and use. Bomber __________________ Your media induced paranoia is interfering with my freedom. Aging is a disease and everyone has it. A pandemic for which there is no vaccine. And, if you live long enough, it will kill you.

July 18th, 2011, 05:28	#6
Snowstorm45 Trader rating Join Date: Apr 2011 Location: BC, Canada	I have the same gun, just wondering, has anyone tried the spring that came with it to lower the velocity, what FPS does that give? __________________ "Who enjoys, wins." - Sonora Kashima

May 16th, 2011, 23:56	#2
Steven Trader rating Join Date: Jan 2009 Location: Langley, B.C	The M110 should net you around 350-380 FPS, but it all depends on your rifle's airseal and other components.

May 18th, 2011, 01:51	#3
Azrael_VM Trader rating Join Date: May 2011 Location: Longueuil	ok thanks for the tips, there is someone who have allready downgraded his G&G Max to 400fps who can confirm wich one of these 2 springs is the best to get close to 400 without overpass it?

July 17th, 2011, 10:34	#4
yerfdoggnahc Trader rating Join Date: Jul 2011	i dont think the m110 is made by PDI. PDI measures their spring power by the percentage of 1 joule. whereas all the other springs are measured by the meter per second of the bb once projected. so, an m"110" is 110 meter per second , which is 360 fps. if it's 110% of 1 joule, it would be like 1.1 joule, which is roughly 320 fps. If you DO want a PDI spring that gets u to 400 fps, try the 170%.

July 21st, 2011, 13:01	#7
THEMAKKER13 Trader rating Join Date: Jul 2010	1 Joule is 328 fps, so 1.1 Joules is not 320 fps. I would recommend a Guarder M115 spring. I know I was getting 380 fps out of an M110 in my G&G Combat Machine and they would probably pretty similar so you have a reference.

July 22nd, 2011, 10:04	#8
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	G&G says the included spring drops it below 400 fps... I have the max m14, the manual says out of the box it's 485, we'll find out at the chrono this weekend how it compares, and then I'll put in the spring it came with and measure again next chance I get.

July 22nd, 2011, 20:00	#9
speedracer9220 Trader rating Join Date: Jun 2009	I have a GR16 and just installed a m110 spring. I am now chroning between 390-403 fps with the hop adjusted.

July 22nd, 2011, 23:31	#10
THEMAKKER13 Trader rating Join Date: Jul 2010	Yeah, for anyone who didn't know, hop up decreases velocity.

Get M16 G&G Max to 400fps

Upgrades & Modifications