Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Ported cylinder

:

Doctor's Corner

Reply
 
Thread Tools
Old March 13th, 2017, 22:17   #1
BobbyDangerous
 
BobbyDangerous's Avatar
 
Join Date: Mar 2010
Location: Oshawa
Ported cylinder

I have an SHS ported cylinder now and I get a decent FPS with a 363mm inner but when I switch to a 260mm FPS drops significantly. Any recommendations on what sort of ported cylinder I need for a shorter length inner barrel?
__________________
-Dangerous-

BA Level 3 Certified
BobbyDangerous is offline   Reply With Quote
Old March 14th, 2017, 00:40   #2
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
this should help out.
http://s253.photobucket.com/user/air...sdsad.jpg.html
but based òn the chart depending on the port location you could be optimal. but losing because of the light bb, try to chrony for Juels not fps.
also could just be airseal between the new barrel and hop rubber or hop unit etc..
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft

Last edited by Hectic; March 14th, 2017 at 00:44..
Hectic is offline   Reply With Quote
Old March 14th, 2017, 01:44   #3
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
You've got too much volume to push out a light BB. I assume you're using .20s to chrono with the 260mm?
The BB is leaving the barrel before the air even gets a chance to really compress itself. So try chronoing with a .28 or .30 first.
ThunderCactus is offline   Reply With Quote
Old March 14th, 2017, 09:05   #4
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
chrono value with a .2 doesn't matter as long as it is under 400 fps. The important one is you get the value you want with whatever weight you're shooting. 400 fps with .2 is 1.48J Ideally you want to shoot 1.48J with the weight you actually use. In a perfect world when you get 1.48 with a .2 the math says you will get 325 with a .3, but in your situation, you could have a phenomenon called joule creep where you have too much air in the cylinder compared to the barrel, so a heavier BB might get higher J than a lighter one.

I would check that before making any changes to the system. If you are getting acceptable J out of this setup with your shooting weight, then nothing needs changing.

If you're getting low readings, finding an even shorter ported cylinder might be a challenge, you could just drill a slot closer in if you know what you're doing... or you can find the right cylinder... or you can use a stronger spring. If you're going to change between short and long barrels, maybe it's best not to change anything.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old March 14th, 2017, 11:32   #5
BobbyDangerous
 
BobbyDangerous's Avatar
 
Join Date: Mar 2010
Location: Oshawa
Chrony with .25's.

With an m110 was roughly 290 with the short barrel

340 with the 363
__________________
-Dangerous-

BA Level 3 Certified
BobbyDangerous is offline   Reply With Quote
Old March 14th, 2017, 12:04   #6
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
that sounds not quite right.. I'm pretty sure you should still be getting over 1J.

Check your compression.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old March 14th, 2017, 12:11   #7
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
that sounds not quite right.. I'm pretty sure you should still be getting over 1J.

Check your compression.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old March 14th, 2017, 12:31   #8
BobbyDangerous
 
BobbyDangerous's Avatar
 
Join Date: Mar 2010
Location: Oshawa
Quote:
Originally Posted by BobbyDangerous View Post
Chrony with .25's.

With an m110 was roughly 290 with the short barrel

340 with the 363
I think it's the inner barrel itself. The 260mm has a large window. Think it's not right for my hop up. I'll try cutting down my other barre and working with that.
__________________
-Dangerous-

BA Level 3 Certified
BobbyDangerous is offline   Reply With Quote
Old March 14th, 2017, 14:11   #9
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
window shouldn't matter. Don't cut your barrel unless you have the tools to redo the crown on the end.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old March 15th, 2017, 09:47   #10
BobbyDangerous
 
BobbyDangerous's Avatar
 
Join Date: Mar 2010
Location: Oshawa
Yeah I used a pipe cutter and a dremel.
__________________
-Dangerous-

BA Level 3 Certified
BobbyDangerous is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 14:56.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.