Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Accessories Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

New bucking for M-14

:

Accessories Discussion

Reply
 
Thread Tools
Old October 18th, 2014, 15:29   #1
Mcmanensen
 
Mcmanensen's Avatar
 
Join Date: Oct 2014
Location: London
New bucking for M-14

Hey everyone,

Im new to the sport and was wondering if any of y`all could help me out.
I just got my first Airsoft rifle (a CYMA M-14) and i want a bit more accuracy on it, and from my research i found out a inexpensive way to do it is by changing the bucking.

Any idea`s on which one to get?, i also heard that combinations work well but i don`t know what combinations there talking about.

Any help would be great,
Thanks!!
Mcmanensen is offline   Reply With Quote
Old October 20th, 2014, 11:49   #2
Bakasaur
Shit Geyser
 
Bakasaur's Avatar
 
Join Date: Aug 2011
Location: Newmarket, Ontario
I had very good luck with Lonex 70D buckings in my Cyma M14. I would recommend Maple Leaf, but they're hard to tune if you're not used to them.
Some other tips include teflon taping the barrel, and using 0.25g bbs (for that specific gun)
Bakasaur is offline   Reply With Quote
Old October 20th, 2014, 12:09   #3
-Shade
 
-Shade's Avatar
 
Join Date: Feb 2013
Location: Oakville - ON
In terms of easy - I've had the best experience with the Modify baton rubber and flat hop that comes with it. It's pretty good for a simple upgrade.

Just a warning, the M14 needs a shorter hopup rubber than usual, so that just involves cutting off a bit from the back with an exacto knife. to measure, just place it side by side with the original one.

Like Bakasaur said - teflon tape helps and do anything to help stabilize the inner barrel so it doesn't move around.

I use .30g in mine. Always use high quality BBs too.
-Shade is offline   Reply With Quote
Old October 20th, 2014, 13:01   #4
pestobanana
Squid Porn Superstar, I love the tentacles!
 
pestobanana's Avatar
 
Join Date: Nov 2008
Location: Richmond Hill and Waterloo, Ontario
^Modify rubber works fairly well, however I'd recommend getting a Prometheus bridge tensioner instead of using the existing flat hop tensioner. The bridge tensioner will have to be cut at both ends to match the barrel window length, but this will give you the best possible hop up setup without R-hopping your gun.

Teflon tape is used to seal threading, not to patch over leaks. It also wears away and degrades very quickly. Use some thick teflon grease between the hop up rubber and barrel, then tie the rubber to the barrel. That way you get a permanent 100% seal. Not super easy, but not very difficult, there are probably videos on how to do it on Youtube.
pestobanana is offline   Reply With Quote
Old October 20th, 2014, 13:23   #5
Spike
Privateer Airsoft
 
Spike's Avatar
 
Join Date: Dec 2008
Location: Beaverbank, NS
I would recommend the bridge tensioners only to people who have a bit of experience with doing their own tech work. It's one of those systems where if it's installed even a bit crooked, your shots will go all wonky.

PDI W hold buckings are also really good.
__________________
I change primaries like other people change socks.
Spike is offline   Reply With Quote
Old October 20th, 2014, 13:34   #6
-Shade
 
-Shade's Avatar
 
Join Date: Feb 2013
Location: Oakville - ON
I personally use the bridge tensioner as well. Pestobanana is right when he says it's second to an r-hop. Very effective.

Cutting it for an M14 is definitely tricky business though. So if you go that route, be very careful and use a sharp knife, otherwise the flat nub that comes with the modify fits the hop up perfectly with no modification, and will definitely give you a huge accuracy boost
-Shade is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Accessories Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 09:40.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.