Resealing WE M4 GBBR Mags (56K hurt)

Deadpool · March 2nd, 2012, 23:27

If I may add to this thread.

Personally, I don't completely wipe the side of the mags clean of the oozing gasket maker. I smear it onto the seam to give a little more sealing, just in case. Not too thick though, because if it's too thick, the mags won't fit properly in it's casing.

Also, I use O-ring grease (available at any pool supply store) on the valve o-rings before screwing them in, keeps them oiled up much longer then low weight silicon oil.

SHaKaL · March 3rd, 2012, 10:45

Thanks guy's

I used the black gasket maker without the o-ring on one of my kc-02 mag for a test.
Seem to work for now. I filled the mag and no leaks yet. Will wait a couple of hours then do my others 5 mags.

MrEvolution · July 7th, 2012, 22:36

Where do you get a valve key? I can use a flathead to get the fill valves out but the knocker valves are a different story.

coach · July 7th, 2012, 22:44

Quote:

Originally Posted by MrEvolution

Where do you get a valve key? I can use a flathead to get the fill valves out but the knocker valves are a different story.

really Sam?

http://www.airsoftparts.ca/store2/in...roducts_id=463

tome · November 11th, 2012, 12:22

Hi. Sorry for the necropost!

Wanted to ask whether this repair you've written this great tutorial for (using your latest black gasket maker technique) results in a permanent fix from the version 1 mags? I as because I'm trying to work out whether I should take up a deal on getting used version 1 mags that "have no leaks" at $30 each or whether to spend the extra and get the version 2 mags.

Cheers!
Tome

Basic-Wedge · November 11th, 2012, 13:10

Get the generation 2 mags. No question about it, they're much better.

tome · November 12th, 2012, 08:34

Thanks Wedge, v2 mags it is then!

Basic-Wedge · November 12th, 2012, 10:15

I liked the improved gen. 2 mags so much, I bought the mod kits to convert all my first gen. mags!

Berkut · November 12th, 2012, 10:19

Quote:

Originally Posted by Basic-Wedge

I liked the improved gen. 2 mags so much, I bought the mod kits to convert all my first gen. mags!

There is a kit to convert Gen1s to Gen2s? How does it work?

SINN · November 12th, 2012, 10:25

http://youtu.be/ZD0opgYuz14

Gato · November 12th, 2012, 10:35

I haven't been keeping up, but my WE is closed bolt still and I intend to keep it that way. Are the V2s compatible with closed bolt systems?

GBBR · November 12th, 2012, 10:41

Quote:

Originally Posted by Gato

I haven't been keeping up, but my WE is closed bolt still and I intend to keep it that way. Are the V2s compatible with closed bolt systems?

I believe all you have to do is put the top feed lip part onto the v2 core and your fine. I rmbr playing at sgt and some dude said he had v2 CB mags

Berkut · November 12th, 2012, 10:54

Quote:

Originally Posted by SINN

http://youtu.be/ZD0opgYuz14

Thanks!

m102404 · November 12th, 2012, 10:55

Don't see why not.

Basic-Wedge · November 12th, 2012, 12:51

The mod kit comes with a new core - one with a much improved gas seal. If I recall, the kit sells for about $20, and it includes just six parts. Everthing else comes from the donor mag. You might also be interested in a mod kit if you've damaged a gen. 2 mag (although, they're plenty tough).

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 3rd, 2012, 10:45	#32
SHaKaL Trader rating Join Date: Jan 2005 Location: Trois-Rivi?res	Thanks guy's I used the black gasket maker without the o-ring on one of my kc-02 mag for a test. Seem to work for now. I filled the mag and no leaks yet. Will wait a couple of hours then do my others 5 mags. __________________ HellRanger 1969-2007 LRRP FOREVER 101e 506Pir Fox Company - SHTYK NOZH

November 11th, 2012, 13:10	#36
Basic-Wedge Trader rating Join Date: Mar 2010	Get the generation 2 mags. No question about it, they're much better. __________________ * * * * * * * * * Rob Bye

November 12th, 2012, 10:15	#38
Basic-Wedge Trader rating Join Date: Mar 2010	I liked the improved gen. 2 mags so much, I bought the mod kits to convert all my first gen. mags! __________________ * * * * * * * * * Rob Bye

November 11th, 2012, 12:22	#35
tome Trader rating Join Date: Sep 2007 Location: Toronto	Hi. Sorry for the necropost! Wanted to ask whether this repair you've written this great tutorial for (using your latest black gasket maker technique) results in a permanent fix from the version 1 mags? I as because I'm trying to work out whether I should take up a deal on getting used version 1 mags that "have no leaks" at $30 each or whether to spend the extra and get the version 2 mags. Cheers! Tome

November 12th, 2012, 08:34	#37
tome Trader rating Join Date: Sep 2007 Location: Toronto	Thanks Wedge, v2 mags it is then!

November 12th, 2012, 10:25	#40
SINN Trader rating Join Date: Jun 2005 Location: Toronto	http://youtu.be/ZD0opgYuz14 __________________ MODT - Magnus Operator Development Team - tu fui ego eris

November 12th, 2012, 10:55	#44
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	Don't see why not.

November 12th, 2012, 12:51	#45
Basic-Wedge Trader rating Join Date: Mar 2010	The mod kit comes with a new core - one with a much improved gas seal. If I recall, the kit sells for about $20, and it includes just six parts. Everthing else comes from the donor mag. You might also be interested in a mod kit if you've damaged a gen. 2 mag (although, they're plenty tough). __________________ * * * * * * * * * Rob Bye

Resealing WE M4 GBBR Mags (56K hurt)

Airsoft Guns Discussion