Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Information Center > Reviews
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Review - Sun Project M16A1 Carbine

:

Reviews

Closed Thread
 
Thread Tools
Old October 30th, 2004, 20:15   #1
Agit-Prop
It's True He's Not Dead! Just Molding!
 
Agit-Prop's Avatar
 
Join Date: Dec 2001
Location: Ontariariario, Canada
Send a message via ICQ to Agit-Prop
This review is not yet complete. Pictures and more information will follow shortly.

About a year or 2 after I first got into airsoft I had the opportunity to buy a copy of the 2000 edition of “Guns Digest”, a buyers guide for airsoft and model guns and accessories that contains photographs and information (in Japanese) of most of the products that are manufactured in Japan. This publication is essentially “airsoft porn” in that it contains glossy color photographs of many things that you would love to have and caress in the privacy of your own home.


click to enlarge


On page 27 I found the section for Sun Project, where listed among the M40A1, M700 and M203 were three M16 variants with gas hoses coming out from the pistol grip! Naturally I was quite surprised and my curiosity was piqued. I had heard of gas guns from Lt. Poncho and Sgt. Lynch, and I had seen Crow’s Youth Engineering MP5A5 before, but I had never heard anyone mention that Sun Project had produced any externally powered gas assault rifles. Unfortunately no other information was available online. I assumed that this was one of those products that were only ever going to be available in Japan (like PDI metal bodies) so I just forgot about it.


click to enlarge


Over the year or so that followed, I owned a Kokusai M16 Patriot pistol and a Youth Engineering MP5A5 and while they were built better than Tokyo Marui guns and were a hell of a lot of fun to shoot, the unavailability of magazines made them extremely impractical as field guns. Both of these pieces ended up being traded away for AEGs.

So, fast forward a few years and we find there is renewed interest in classic airsoft guns. Paul Lopansri, who owns and regularly skirmishes with the very Kokusai patriot pistol I used to own, had started the www.classicairsoft.net website. It was here that I eventually found Eric Sefrass’ review of the Sun Project M16A2. http://www.classicairsoft.net/articles/sunpro_m16A1/ . The details provided in the review gave me enough information to know that this gun was something that I really wanted, but was completely unobtainable as they were rarely seen on the used gun market and when they were seen they sold for upwards of $1000 US! Too rich for my blood. I decided I would use some measurements I took of a Youth Engineering MP5A5 to create my own set of GBB internals for a Systema bodied SR-16 AEG.

While I was working on this custom GBB SR-16 I heard rumors that Sun Project M16s were available at various Hong Kong and Taiwan retailers. At first I couldn’t believe it, but after poking around on the Classicairsoft.net forums it was confirmed. Apparently a visit to the USA by Mr. Tawada, the original designer of the Youth Engineering, Sun Project, and Shoei GBB airsoft guns showed him that there was still strong interest in his designs. Upon his return to Japan, he met with the owners of Sun Project and convinced them to renew production of the M16A1 Carbine. Apparently the recent production run was commissioned to test the waters and see if there is indeed a viable market for externally powered airsoft guns globally. Apparently these guns are almost completely sold out, so there may be some hope of another production run being done over the winter/spring of 2004/2005.

At my request, Randy at Double Edge Airsoft was able to locate 2 of the few remaining unsold Sun Project M16s in Hong Kong. I jumped on the opportunity and had him order both of them on my behalf. When they arrived, I kept one and Kwokwai Wu took the other.


click to enlarge


Care and feeding of these guns is significantly different than that of AEGs. To begin, you will need a power source. There are really only two viable choices in this regard – High Pressure Air (HPA) or Carbon Dioxide (CO2). Both power sources have their pros and cons which are laid out in the table below.

So, now that you’ve chosen your power source you need to get that power to your gun. The Sun Project M16A2 Carbine seems to work best at about 80 to 110 PSI. Since CO2 exerts 850 PSI at room temperature and HPA tanks come in either 3000PSI or 4500PSI you will need an adjustable pressure regulator to bring the tank pressure down to the guns operating pressure range. There are a couple of choices in this regard. The Palmers Pursuit Stabilizer http://www.palmer-pursuit.com/ is commonly available and seems to the regulator of choice among the classic airsoft crowd. Alternately you can go with a Bob Long Torpedo although it may take a bit more work to get it to function reliably at lower pressures. If you go with a Palmers make sure you order one with a 0-600 PSI gauge. In the end you will replace this with a 0-200 or -0-300 PSI gauge. If you neglect to order a gauge, the regulator may arrive without having a gauge port tapped. A gauge is important as it allows you to consistently set your output pressure, thus setting your muzzle velocity. Along with the Palmers Stabilizer, you will need to get a low pressure kit which includes a low pressure spring and piston and allows you to precisely adjust the output from 0 to 225 PSI.


click to enlarge


Now you need to get your regulated gas to the gun. Some people choose to use paintball remotes, others choose pneumatic hoses and fitting that are meant for industrial applications. Paintball remotes are simple to source so I will focus on the industrial route instead. Various hose and fitting types are available but the simplest and probably best choice is to go with either ¼” or 6mm hose and “push to connect” fittings. ¼” hose will be easier to find as it is commonly used as air-brake lines in transport trucks and is rated up to 1200PSI. Push to connect fittings are preferred as they allow you to connect and disconnect the hose from your gun without using any special tools. Of course, to assemble everything together you will need some other fittings and thread sealant but the exact list of what you need may vary depending on your regulator configuration. You will have to play it by ear as you get it together.

Magazines or more accurately the unavailability of classic airsoft magazines has always been a severe limiting factor in making these guns useable on the field. I have to assume that Mr. Tawada recognized this fact and altered the design of the Sun Project M16 internals to make them compatible with Tokyo Marui magazines. That being said, one must be cautioned that the Sun Project M16s are very sensitive to magazines that feed too slowly or inconsistently. For this reason, G&P mid-cap magazines perform very poorly in the gun, causing frequent mis-feeds and jamming especially in full auto. Similarly, most high capacity magazines aren’t able to keep up with the cycling bolt and will mis-feed as well. The following magazine types are known to perform well in these guns; CA lowcap, TM lowcap, AE hicap, STAR 30rd mags, and the new TM 20rd style 80rd mag. I’m having some success with TM 20rd VN hicaps with occasional mis-feeds in full auto only.

Onto the nitty-gritty about the gun itself. Sun Project is calling this an M16A1 Carbine, which is accurate to a degree in that it has an M16A1 upper, M16A1 markings on the lower, a Mattel style telescoping stock and short, ribbed cylindrical hand-guards wrapped around a 16” lightweight barrel. It has an A1 style birdcage flash-hider and a bayonet lug as well. Gordak in Chicago has done extensive research into the distinctive configuration of this gun and determined that it is basically a Colts model M653. This gun wasn’t commonly seen outside of the IDF, so one must assume that Sun Project was just trying to offer some variety rather than pandering to the gun-heads out there otherwise they would have made a few minor changes and released it as a XM177 or other more familiar model. Some enterprising individuals are experimenting with grafting AEG components onto the gun to make it into something like an XM or similar. There is also an outfit in Japan called Plum Project that has done flat-top (and other) modifications to these guns. For the time being I am satisfied with the gun in its currently unmodified condition and have no plans to make it into another model of M16.

The fit and finish of the gun is a mixed bag however I think that some of its imperfections are more in keeping with a real-steel M16/AR15 that Tokyo Marui’s idealized vision of what an M16 looks like. What I’m referring to is things like file marks on the receiver, slight imperfections in the finish, the “gloss” of the pistol grip, hand-guards and stock. Upon very detailed examination of the gun under bright lights, one will notice file marks along the “seam” of the receiver where the assembly technicians at Sun Project filed off flash from the casting process. There are also some light file marks on the rear right of the lower receiver. Some flash is evident around the lips of the magwell, and on some of the smaller parts such as the selector switch and buffer tube collar. Incidentally, the molds used to cast the metal receiver once belonged to JAC. If you ever take a close look at a Sun Project M203 you will also see the JAC name appears on its receiver. The markings on the lower are a tad suspect as well. To begin, the stamping is a fair bit shallower on the left side of the trades than it is on the right. It’s not horrible by any stretch of the imagination. It just isn’t perfect. Also of note, there are no armory marks on the upper receiver and the barrel lacks stamping as well. The forward assist is the A1 teardrop style, and the upper receiver has no brass deflector. There is a serial number on the receiver where you would expect to find it but it is the same on every single gun out there. Each gun does have a unique serial number stamped into the bottom of the trigger guard plate.


click to enlarge


click to enlarge


As I hinted earlier, the plastic furniture is probably a tad on the shiny side for most people’s tastes. That being said, it’s not really any shinier than the furniture I’ve seen on real AR-15s at the shooting range. The grip is an A1 style grip without the finger groove found in later A2s. It is true to the dimensions of the real steel M16A1 grip. The telescoping stock only has two position but this is easily remedied with some careful work on the drill press. I’m not sure if a real telescoping stock would fit as the one supplied is larger inside than a TM tele-stock. Another note: the buffer tube in this gun is actually functional and contains the recoil spring. Replacement with a real buffer tube might be possible if the threads match. Replacement with an AEG buffer tube won’t work at all. I’m not certain how one would go about converting it to a full stock. One thing is certain; an AEG full stock will not fit.

One flaw that seems to be very common is a gap of approximately 1mm between the upper and lower receivers.

I have a slight peeve about the guns packaging. There were no accessories included! No magazine, no cleaning/un-jamming rod, and no sight adjustment tool. In my opinion, if you’re selling a gun with A1 rear sights, you must supply a sight adjusting tool.

The selector switch has détentes that are more positive than those on an AEG, but not as stiff as those on a real AR15. Unfortunately, if the gun is set to safe it is possible to pull hard on the trigger and have the selector pop out of safe to semi. For this reason I highly recommend getting a slide valve or similar on/ff for your remote so you can safely remove the gun from the gas supply when in a safe zone. The magazine latch is very positive and TM magazines will slide freely in and out of the mag-well when it is depressed. The charging handle is functional and allows you to chamber the first BB before firing a round. The latch on it is a tad stiff however and as a result the charging handle will occasionally fail to return all the way forward. Incidentally, the dust cover is always open on this gun. Some have discussed the possibility of retrofitting a JAC dust cover to gain full dust cover functionality.

The receiver pins have spring loaded retaining pins that match the function of those on a real-steel AR-15. You can pull out the rear receiver pin, leaving it latched into the lower receiver by the retaining pin. Once you do this you may field strip the gun exactly like the real thing. Pivot the receiver open on the front receiver pin, and remove the bolt by pulling out the charging handle.

a hint of what's to come
__________________

Hate me??? Buy the T-Shirt!!!
FREE TIBET*

*With purchase of Tibet of equal or greater value
Agit-Prop is offline  
Old December 9th, 2004, 04:56   #2
Danny Cyanide
 
Join Date: Oct 2003
Location: Calgary AB
Send a message via MSN to Danny Cyanide
Hey Tom,

Thanks for the review. I picked up a Sun Project M16 Carbine as well, and recieved it today! I am just waiting on my regulator to arive in the mail, and then I am good to go. I was just wondering if you had done any PSI/FPS tests with this gun? If not, I am borrowing my clubs chrono sometime soon, and would be glad to provide a listing of various FPS readings at diferant pressures!

Steffan
Danny Cyanide is offline  
Old December 9th, 2004, 05:58   #3
concept_8
 
concept_8's Avatar
 
Join Date: Sep 2004
Location: sudbury Ont.
:shock: if we only had smiley's that drooled lol. good review. thats sweet that they're making more might be time to rearange the wish list :grin:
__________________
"Death in the tall grass"
concept_8 is offline  
Old December 12th, 2004, 14:07   #4
Agit-Prop
It's True He's Not Dead! Just Molding!
 
Agit-Prop's Avatar
 
Join Date: Dec 2001
Location: Ontariariario, Canada
Send a message via ICQ to Agit-Prop
Allrighty, I know I promised further info in the first post, so here it is.

Performance wise, the Sun Project does have a couple of issues which effect its playability. The first and probably most significant problem is the hopup. The gun does have a hopup sleeve in it but the sleeve doesn't have anything behind it to provide back pressure against the BB. As a result, the fixed hopup is very weak - so weak that the guns performance is similar to a gun with no hopup. Shots start to drop after about 60 feet or so.

Some of the players from the 'States have modified thier SP M16A1 Carbines to have adjustable hopup. I've taken thier pioneering work and made a couple of slight changes to increase stability and reduce the risk of damaging the hopup parts while doing this modification.

Anti-litigation disclaimer:

-These instructions are here for informational purposes only.
-If you are not mechanically inclined, don't even bother attempting this modification.
-If you turn your gun into a giant paperweight, it's your own fault.
-If you think this information shouldn't be public domain, you can get bent.


OK, so you've had your SP for a little while and you're finding that the satisfaction derived from the feel of shooting it is offset by anemic hopup and limited range. "Why oh why isn't the hopup adjustable?", you cry.

Well, fret no more.

As you are aware (no doubt) several users have modified thier own SP's to have adjustable hopup. I have undertaken just such a project myself and have documented the process for those of you who would like to try it yourself.

I'd like to thank and give credit to Blitz and Gordak for thier pioneering work and tips.

Required parts and equipment:

Drill press
Drill press vice
1/8" drill bit
a sharp, clean file
#6/32 tap and tap wrench
1/2" x #6/32 set screw
hack saw (to trim dummy gas tube)

****NOTE- although using a #6/32 set screw should work, you may want to use a #4/40 set screw instead. If so, do not use a 1/8" drill bit and #6/32 tap.


Before we get rolling, you'll have to take down the upper receiver, to get complete access to the internals, including the barrel mounting block. Basically you want to get it to this level of disassembly to do this right.


Once you get the chamber and barrel out of the barrel mount block, you'll need to remove the barrel from the chamber. Remove the four set screws that hold the barrel in the chamber and carefully remove the barrel from the chamber.




On the end of the barrel there is a brass sleeve that actually contains the hopup membrane itself. Carefully remove this brass sleeve and membrane. The membrane should come off with the brass sleeve. (at least, it did on mine) never attempt to force the sleeve or membrane onto the barrel. The membrane is quite fragile.



Notice the interior profile of the hopup membrane.



So, once I had everything apart I took some measurements. Knowing that I would have to drill and tap the chamber at a point that would coincide with the location of the flat of the hopup membrane, I measured the distance from the barrel mounting set screw marks on the barrel to the cut-out on the end of the barrel where that flat would be located when everything is assembled. Turns out this is very close to 14mm from these set screws.



Tranferring that measurement to the chamber itself showed that this is also very close to the location of the gap between the front face of the receiver and the rear of the delta-ring on the barrel mounting block.



I also marked the brass sleeve at this location as I would have to cut a port to allow the set screw to contact the membrane.



Now, once the measurements were made and the course of action decided, I screwed the outer barrel into the chamber block, and mounted the outer barrel and chamber block into the barrel mounting block using the factory installed set screws to ensure correct alignment.

[red]*Important Note* - The only parts that should be assembled for this operation are the outer barrel, the chamber block, and the barrel mount block. Perfect rotational alignment of the chamber block in the barrel mount block is critical fot this mod to work correctly. You can visually align the sides of the BB inlet nozzle with the receiver pin flange immediately prior to tightening the set screws on the sides of the barrelmount block.[/red]

I mounted this assembly in a vice and drilled it through the top of the barrel mount block and then the chamber block. It is important to take your time and do this carefully as slight misalignments of the drill can result in significant hooks in your shots once reassembled. I drilled on the midline just forward of the front face of the receiver.

Once the holes were drilled (using a 1/8" drill bit) I went on to tap the holes with a #6/32 hand tap. If you tap both the barrel mount block and chamber block simultaneously (as opposed to overboring the barrel mount block), you can use a 1/2" set screw thus having more threads to bear the stress as well as having the head of the set screw exposed (by about 1/32") outside the receiver of the gun. This makes for easier adjustments as well as greater stability.

To cut a port for the setscrew in the brass sleeve, I decided to use a file rather than drilling a hole. This would ensure a lower chance of damaging the membrane, while creating a larger port for the set screw.

Here are pics of the modified parts.



Barrel and chamber assembled



The completed assembly (note hex driver and set screw)



Please note, this mod requires either removal, or trimming of the dummy gas tube. *** I stand corrected. Gas tube can be modified. The following instructions are courtesy of Paul Lopansri, owner of ClassicAirsoft.net

Quote:
Originally Posted by plopansri
Tom,

The mod doesn't require the shortening of the gas tube. My own gun had it shortened, but I replaced it with another JAC gas tube and modified it so that it will work with the hop up screw. To do this I:

1) cut a channel a bit wider than the set screw, in the bottom part of the gas tube, starting from the rear and extending forward. I fitted and tested to make sure the set screw cleared the sides of the channel.

2) I tested it by letting the set screw stick out a little bit, then inserting the tube. The set screw was set out low enough to make sure that it cleared the channel but didnt hit the top of it.

3) With a center punch, I marked the spot on the tube where the set screw would be. I removed the tube and drilled a hole, making sure that the diameter of the hole was wider than the set screw to allow it to move freely.

That's it! With the gas tube inserted, you can now adjust the set screw to your heart's content. Foregrip rigidity is not sacrificed! With the gas tube trimmed short to avoid the set screw, the foregrip is very wobbly.


Paul

Hi-res pics are here: http://www.pbase.com/agitprop/hopup_mod
__________________

Hate me??? Buy the T-Shirt!!!
FREE TIBET*

*With purchase of Tibet of equal or greater value
Agit-Prop is offline  
Old March 6th, 2006, 22:47   #5
Droc
Guest
u ever get a vid of this thing in action?
 
Old March 6th, 2006, 23:33   #6
Mysteryfish
 
Join Date: Mar 2004
Location: North Vancouver, B.C.
... sigh ...

Go ahead and take a look at the first post.
At the bottom.
Where it says "a hint of what's to come"

I wonder where Agit is anyways...
Mysteryfish is offline  
Old March 7th, 2006, 12:38   #7
Kwokwai
 
Kwokwai's Avatar
 
Join Date: Dec 2001
Location: Mississauga, ON
Send a message via ICQ to Kwokwai Send a message via MSN to Kwokwai Send a message via Yahoo to Kwokwai
Quote:
Originally Posted by Droc
u ever get a vid of this thing in action?

Heheh, if you'd been at the SGC game you'd have seen it in action!
Kwokwai is offline  
Closed ThreadTop


Go Back   Airsoft Canada > Information Center > Reviews

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 16:18.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.