Puxing 888K Radios ...

[Dimitri]

So I ordered and then picked up 3 Puxing 888K's from North Trail Sports yesterday.

I know there have been a lot of threads in the past about issues programming them, and I went through quite my own issues as well.

Regardless of the Prolific driver I had tried to use, I kept having issues properly connecting to the radios.

So I did a system restore and tried the 3.2.0.0 drivers found here ...

http://miklor.com/COM/UV_Drivers.php

And I used the older Puxing 888 UV software (although now that the drivers work the latest software may also work).

http://blog.murs-radio.com/?page_id=416

And I finally got it with my Window's 7 laptop.

I hope it helps.

Dimitri

[w1lp33]

Will try, thanks. Had given up and programmed mine manually, but having the option of software would be nice.

[Dimitri]

Just make sure you wipe out ALL previous Prolific Drivers from your PC, I actually had to do a system restore to get 3.2.0.0 working in the end to erase all the installed drivers I had tried to that point.

But it did end up working.

Dimitri

[Trendkilla]

Manual made easy

Enter button changes from A to B channels.. Start out in ACH 1 . Turn know on top to get there. Dont worry about B it programs for both. Then push your ESC till the M disappears on the left. Type in ^ digit code for channel 1 . Then press ESC 4 times and M will disappear again. Then press menu then ESC and the M will flash. Type in you channel with a 0 in front..eg. 001 (channel 1 ) Then press ESC 2 times and thats it. To program the next channel 2 turn knob to CH2 and repeat. And all the way to 30

More Detail?
http://www.airsoftcanada.com/showthread.php?t=128892