Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Just bought my first aeg

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old July 7th, 2015, 10:53   #16
FOX_111
Le Roi des poissons d'avril
 
FOX_111's Avatar
 
Join Date: Dec 2003
Location: Terrebonne, Québec
TM G36c was my first AEG. I bought it when it came out the first time.
It's a very solid AEG. Once upgraded, it's a machine.
The only drawback is the mags, they are very large and take a lot of space. The rifle itself is large enough, even the C variant is bigger than an M4.

VFC... I don't know, but last time I heard about them, they where unreliable.
__________________

Vérificateur d'âge: Terrebonne
FOX_111 is offline   Reply With Quote
Old July 7th, 2015, 10:55   #17
brock0
 
brock0's Avatar
 
Join Date: May 2013
A 7.4v lipo yes. 11.1v no.

I've also had a number of VFC guns. Externally beautiful and rock solid, internally decent. Piston and hop-up would probably be the first things to look at upgrading.
brock0 is offline   Reply With Quote
Old July 7th, 2015, 11:03   #18
Eddie_m18
 
Join Date: Jun 2015
Location: Delhi,ontario
Also where can I source a spring for this gun that isn't in the uk. I'd love to order but the exchange rate is brutal lol
Eddie_m18 is offline   Reply With Quote
Old July 7th, 2015, 12:04   #19
brock0
 
brock0's Avatar
 
Join Date: May 2013
If it uses a standard spring size, literally dozens of places here in Canada.

If it's the shorter TM spring that the M4/416s use, eagle6 for a custom one OR a standard one trimmed down - again recommend having a gun doc do this.
brock0 is offline   Reply With Quote
Old July 7th, 2015, 12:28   #20
Moses015
 
Moses015's Avatar
 
Join Date: Feb 2012
Location: Brantford, Ontario, Canada
There's nothing wrong with 11.1 lipos. It's the same wear and tear on the gun, just in a quicker time period. If you can get away with a 7.4 than all the power to you. I shoot semi only and play big MilSims so trigger response is key and 11.1's give the absolute best. Haven't had a problem with 11.1's the entire time I've used them. Biggest problem I've had is a busted tappet plate on a stock VFC KAC PDW that I ran for 2 years as my primary before running into that problem. But as I said, if you're going to be happy with the response you get from a 7.4 then there's no need to do the step up. Just wanted it known that 11.1's aren't the devil lol.
__________________
Call Sign: BEE | Legion Airsoft
Primary Loadout:
KWA RM4 ERG PTS Centurion Arms, TM G17 SAI
Backup:
KWA RM4 ERG LVOA, KWA ATP, VFC KAC PDW, G&G Top Tech MP5 A5
Moses015 is offline   Reply With Quote
Old July 7th, 2015, 16:07   #21
brock0
 
brock0's Avatar
 
Join Date: May 2013
Agreed 11.1v can be quite good in most setups.

It's way overkill for a stock TM. Trigger response is very snappy on 7.4 and ROF is already quite high (20+).

An 11.1v would strip the gears quick unless you always shot in semi on a stock TM.

Even my fully pimped TM 416 with full Prometheus internals and a Spectre FET only needs 7.4v for amazing performance.
brock0 is offline   Reply With Quote
Old July 7th, 2015, 16:20   #22
Eddie_m18
 
Join Date: Jun 2015
Location: Delhi,ontario
thanks for the help guys
Eddie_m18 is offline   Reply With Quote
Old July 7th, 2015, 22:10   #23
L473ncy
 
L473ncy's Avatar
 
Join Date: Oct 2004
Location: 11-30-24-1W5
Quote:
Originally Posted by Eddie_m18 View Post
Also where can I source a spring for this gun that isn't in the uk. I'd love to order but the exchange rate is brutal lol
No one mentioned anywhere specific yet but Airsoftparts.ca or Airsoftstore.ca are 2 good ones for "upgrade parts" (well you're really "downgrading" the spring but at the same time you're also prolonging the life of your rifle because slightly less stress and wear on it).

7.4 and 11.1V; there's pages and pages of info on it, personally I use 7.4V because that's what I bought from a long time ago but with a couple minor upgrades I could easily run an 11.1V (you might as well get them done while you downgrade the spring, MOSFET, AOE correction, Sorbo pad, etc. also note to beware of "overspinning" your gears especially if you have a light spring and are running 11.1V).
__________________
ಠ_ಠLess QQ more Pew Pew
READY TO >> RACE
L473ncy is offline   Reply With Quote
Old July 8th, 2015, 15:43   #24
Eddie_m18
 
Join Date: Jun 2015
Location: Delhi,ontario
Finally it's in
Attached Images
File Type: jpg image.jpg (1.89 MB, 7 views)
Eddie_m18 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 01:02.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.