Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

VFC 417 DMR Build

:

Upgrades & Modifications

Reply
 
Thread Tools
Old April 3rd, 2015, 20:50   #16
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
Okay i put the above parts in. With the stock spring and motor for now. I have the gate nanoAAB fet in.
the gun shoots however it will dbl shoot in semi sometimes and if its stoped mid cycle it strugles to get going. Does this mean i need a slower tourqier motor, or is something else wrong? Im sure ths shiming is good lil less than .5mm play max, piston is moderately swissed, no bearing in piston head, 3 teeth shaved (including the alrdy missing tooth on the lonex piston) liston lightly shaven in the back to clear the tight gearboX, the air seal is sweet on this thing as well.
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft

Last edited by Hectic; April 3rd, 2015 at 21:17..
Hectic is offline   Reply With Quote
Old April 3rd, 2015, 22:40   #17
Wrath144
formerly steyr
 
Join Date: Sep 2005
Location: Winnipeg, Manitoba
Seeing how shims come in .1, .15 and .2 mm sizes, .5mm is a lot of play. I'm assuming you mean .05mm? The stock motor you have has nowhere near enough torque for this build. Also, when you get a motor with stronger magnets, it will have more stopping power to prevent the double shooting, especially with the AB mosfet.
Since it's a DMR, you actually want a heavier piston assembly. It helps with consistency. On a 420-440 fps spring pre engagement shouldn't be an issue, especially with an AB mosfet. If you get a high TPA motor, ie 22+, your ROF will be low enough that you likely wouldn't see it anyway.
__________________
BROFORCE
Admin - Winnipeg Airsoft
Wrath144 is offline   Reply With Quote
Old April 4th, 2015, 09:26   #18
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
Yeah i only removed about 15% or so of the piston. Didnt skeletonize it just drilled some holes in it. Mainly to save wear n tear on the gearbox not so much for speed. I figured the motor was the issue all runs smooth but still gets hot lol. The magnets in the stock vfc motor have got to be the weakest i have seen. A magnetic screwdriver will pull screws off that are stuck to the motor lol
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft
Hectic is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 18:51.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.