Helmet Gallery

c3sk · May 25th, 2011, 02:04

Ops-Core Base Jump Military Helmet TAN
Wilcox L4 G24 Mount FDE
Norotos PVS-14 Dual Dovetail adapter
ITT PVS-14 Gen 3 Autogated NV
LaRue PVS-14 QD Weapon Mount
Some Velcro
Contour HD

Stuff I want... EOG NVG Counter weight, Neptune IR Signal device

Shirley · May 25th, 2011, 02:09

Wow, that's like a $4000 set up. LOL

I wonder if you can shave off that front nvg shroud and then drill holes and throw on the VAS shroud.

Why didn't you mount the ContourHD onto the rail?

c3sk · May 25th, 2011, 02:14

Quote:

Originally Posted by Mr.Hitman

Wow, that's like a $4000 set up. LOL

I wonder if you can shave off that front nvg shroud and then drill holes and throw on the VAS shroud.

Why didn't you mount the ContourHD onto the rail?

You could probably shave down the vas shroud, but just easier to buy the carbon helmet at that point.

Contour is easier to position change with velcro.
Quite strong, stays on there.

+ there is a little spot on the helmet for a lanyard, just haven't bothered attaching it yet.

Shirley · May 25th, 2011, 02:22

But then the carbon is $400 more.. D:
Next time I see you, I want to try it out. lol

BTW, here's also a cheaper way on holding your cam.
http://www.dnkholdings.net/

MilanWG · May 25th, 2011, 18:53

Protec Classic Skate helmet

- ITT PVS-14 Gen 3 Autogated NV
- Wilcox Amber Filter
- Sacrificial Window
- Norotos Rhino Arm
- PVS-14 J Arm Swing Mount
- MICH NVG Helmet Bracket Mount
- Helmet NOD Bungee Cords
- Adventure lights VIP strobe
- Ops-Core H Nape
- Ferro Concepts HCW Helmet Counter Weight Pouch - AOR1

* Bolle X800 (modified with velcro)

MASAKO · May 25th, 2011, 19:27

has been looking for itt pvs 14 for a while, does anyone know which place in canada I can source one ? thanks in advance.

wey ferro · May 26th, 2011, 00:00

check the nv they have at doubletaptactical

panzergrenadier · May 26th, 2011, 00:16

I finally got my Base-Jump Helmet in Multicam. I don't have super fancy shit attached to it though just goggles and a MS2000 Strobe (pics later).
It's a fuckin' awesome helmet though!

Shirley · May 26th, 2011, 00:23

I just hope they make one with just the shell and not the intergrated shroud.. I'd buy one right away.

Conker · May 26th, 2011, 00:28

If I were you I'd just shave down the shroud. Or DIY one based on a CVC helmet.

janash37 · May 26th, 2011, 11:09

My very nearly finished replica MICH TC-2000, just awaiting a new USGI chinstrap to replace the awful one it came with.

Was Tan when I got it, sprayed it Khaki (including the goggle retention straps) and then snakeskinned it with some Olive.
Soon to get a PVS-14!

MICH TC-2000
Ops-Core VAS NVG Mount
Rhino arm
MS-2000 Strobe

redneck12 · May 28th, 2011, 03:43

I tried my hand at camoing my helmet. There are a lot of great looking helmets here, I was trying to get a AOR 1 style on mine. Your thoughts or suggestions, since my stencils didn't work out, I ended up hand painting the semi-digital pattern on. Sorry for the crappy pics my camera is down so I used my laptop cam.
Picture0037.JPG

Picture0039.JPG

Picture0038.JPG

panzergrenadier · May 28th, 2011, 08:52

Here's my Base-Jump in multicam
Nothing super fancy on it...

FlyGuy · May 28th, 2011, 09:52

Hey Panzer,

Did you cut and re-sew the ESS goggle straps to fit on the Ops-Core ARC rail attachments or...?? I was looking to do something similar but none of my goggle straps are of the 2-piece variety so wondering what you did there?

'Fly

panzergrenadier · May 28th, 2011, 10:21

Ya. I unsewed the strap and then set it all up, cut it thn sewed it back up.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 25th, 2011, 02:04	#181
c3sk (╯°□°)╯︵ ┻━┻ Trader rating Join Date: Jul 2007 Location: ก็็็็็็็็็็็็็	Ops-Core Base Jump Military Helmet TAN Wilcox L4 G24 Mount FDE Norotos PVS-14 Dual Dovetail adapter ITT PVS-14 Gen 3 Autogated NV LaRue PVS-14 QD Weapon Mount Some Velcro Contour HD Stuff I want... EOG NVG Counter weight, Neptune IR Signal device Last edited by c3sk; May 25th, 2011 at 02:20..

May 25th, 2011, 02:09	#182
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Wow, that's like a $4000 set up. LOL I wonder if you can shave off that front nvg shroud and then drill holes and throw on the VAS shroud. Why didn't you mount the ContourHD onto the rail? __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

May 25th, 2011, 02:22	#184
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	But then the carbon is $400 more.. D: Next time I see you, I want to try it out. lol BTW, here's also a cheaper way on holding your cam. http://www.dnkholdings.net/ __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

May 25th, 2011, 18:53	#185
MilanWG Perroz Designs Trader rating Join Date: Jul 2003 Location: Toronto, ON	Protec Classic Skate helmet - ITT PVS-14 Gen 3 Autogated NV - Wilcox Amber Filter - Sacrificial Window - Norotos Rhino Arm - PVS-14 J Arm Swing Mount - MICH NVG Helmet Bracket Mount - Helmet NOD Bungee Cords - Adventure lights VIP strobe - Ops-Core H Nape - Ferro Concepts HCW Helmet Counter Weight Pouch - AOR1 * Bolle X800 (modified with velcro) __________________ Last edited by MilanWG; May 25th, 2011 at 19:37..

May 25th, 2011, 19:27	#186
MASAKO Trader rating Join Date: Mar 2011 Location: Brossard, QC	has been looking for itt pvs 14 for a while, does anyone know which place in canada I can source one ? thanks in advance.

May 26th, 2011, 00:00	#187
wey ferro Trader rating Join Date: Dec 2004	check the nv they have at doubletaptactical __________________ www.ferroconcepts.com

May 26th, 2011, 00:16	#188
panzergrenadier Trader rating Join Date: Dec 2005 Location: Sherwood Park, AB	I finally got my Base-Jump Helmet in Multicam. I don't have super fancy shit attached to it though just goggles and a MS2000 Strobe (pics later). It's a fuckin' awesome helmet though! __________________ Gumbercules!?! I love That Guy!!!

May 26th, 2011, 00:23	#189
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	I just hope they make one with just the shell and not the intergrated shroud.. I'd buy one right away. __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

May 26th, 2011, 00:28	#190
Conker Trader rating Join Date: Jan 2007 Location: Canada / Ireland / USA	If I were you I'd just shave down the shroud. Or DIY one based on a CVC helmet. __________________ WTS: King Arms/Madbull Mk18 Mod1 - VFC Mk17 SCAR-H midcap mags, FDE - VFC Mk17 SCAR-H + PWS rail, FDE WTB/WTT: CSOR gear, BFG, Tyr, Crye, etc

May 26th, 2011, 11:09	#191
janash37 Trader rating Join Date: Jun 2010	My very nearly finished replica MICH TC-2000, just awaiting a new USGI chinstrap to replace the awful one it came with. Was Tan when I got it, sprayed it Khaki (including the goggle retention straps) and then snakeskinned it with some Olive. Soon to get a PVS-14! MICH TC-2000 Ops-Core VAS NVG Mount Rhino arm MS-2000 Strobe Last edited by janash37; May 26th, 2011 at 11:37..

May 28th, 2011, 03:43	#192
redneck12 Trader rating Join Date: Mar 2011 Location: Peterborough	I tried my hand at camoing my helmet. There are a lot of great looking helmets here, I was trying to get a AOR 1 style on mine. Your thoughts or suggestions, since my stencils didn't work out, I ended up hand painting the semi-digital pattern on. Sorry for the crappy pics my camera is down so I used my laptop cam. Picture0037.JPG Picture0039.JPG Picture0038.JPG

May 28th, 2011, 08:52	#193
panzergrenadier Trader rating Join Date: Dec 2005 Location: Sherwood Park, AB	Here's my Base-Jump in multicam Nothing super fancy on it... __________________ Gumbercules!?! I love That Guy!!!

May 28th, 2011, 09:52	#194
FlyGuy Trader rating Join Date: Jul 2008 Location: FL120 and below...	Hey Panzer, Did you cut and re-sew the ESS goggle straps to fit on the Ops-Core ARC rail attachments or...?? I was looking to do something similar but none of my goggle straps are of the 2-piece variety so wondering what you did there? 'Fly __________________ Team GHOSTS - Fides et Amicitia G-68 "Can't keep my eyes from the circling skies, Tongue-tied and twisted Just an earth-bound misfit, I" Learning To Fly © 1986 Pink Floyd

May 28th, 2011, 10:21	#195
panzergrenadier Trader rating Join Date: Dec 2005 Location: Sherwood Park, AB	Ya. I unsewed the strap and then set it all up, cut it thn sewed it back up. __________________ Gumbercules!?! I love That Guy!!!

Helmet Gallery

Gear Discussion