Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

TM P226

:

Doctor's Corner

Reply
 
Thread Tools
Old April 5th, 2007, 18:41   #1
CalvinTat
 
CalvinTat's Avatar
 
Join Date: Sep 2005
Location: Red Deer
TM P226

New Problem however... My Guarder metal frame/slide for the TM P226, I have fitted the frame with little problems other than the usual game of "find the retarded small spring", however I just ran across a problem!

On the left side of the P226 the holes drilled for the screws that secure the grips do not have a threading, how can I remedy this situation?

Initial Problem solved. Thank you Renegade!
-----------------------------
Hey Guys,

I am encountering a slight problem with my P226 atm. The issue is with part P226-11 and P226-10 and me not knowing where the hell it came from. The diagram provided by TM does not exactly help. I suspect it goes in front of the piston lip and into the muzzle but I cannot get it to sit properly. I have; however, left the parts out and attempted to fire the P226 and there doesn't seem to be any problems.

Edit: P226 slide does not lock back when magazine is empty due to the lack of this part.

Oh and I kinda bent it a bit by accident, about a 30 degree bend from normal.

Thanks for any help.
__________________
RAINBOW SALAD!!!!!

If practice makes perfect, yet nobody is perfect... Why practice?

Last edited by CalvinTat; April 5th, 2007 at 23:52..
CalvinTat is offline   Reply With Quote
Old April 5th, 2007, 19:16   #2
Renegade)
A Total Bastard
 
Renegade)'s Avatar
 
Join Date: Apr 2006
Location: Tottenham, Ontario
That spring and rod goes in the little well on the right side of the loading nozzel, after it is pushed in. you put the nozzel in, then insert the spring and rod push it down then push the whole assembly back into your slide, this locks it all in and the nozzel should be able to move forward, wit hthe spring pushing it back in to the valve cover.
__________________
W1-5
Renegade) is offline   Reply With Quote
Old April 7th, 2007, 16:37   #3
CalvinTat
 
CalvinTat's Avatar
 
Join Date: Sep 2005
Location: Red Deer
Bump for a new problem
__________________
RAINBOW SALAD!!!!!

If practice makes perfect, yet nobody is perfect... Why practice?
CalvinTat is offline   Reply With Quote
Old April 7th, 2007, 18:01   #4
Renegade)
A Total Bastard
 
Renegade)'s Avatar
 
Join Date: Apr 2006
Location: Tottenham, Ontario
On your new problem: Did you lose the little metal inserts that provide threading? They pull right out and might be still on your grips or floor?
__________________
W1-5
Renegade) is offline   Reply With Quote
Old April 8th, 2007, 01:31   #5
CalvinTat
 
CalvinTat's Avatar
 
Join Date: Sep 2005
Location: Red Deer
Nope, those are still in the original frame, the problem is that Guarder saw it fit to eliminate the need for the TM metal inserts and thread the single piece frame itself. I guess I need a tool to tread the frame myself, I just don't know the thread size nor what the proper tool is actually called.
__________________
RAINBOW SALAD!!!!!

If practice makes perfect, yet nobody is perfect... Why practice?
CalvinTat is offline   Reply With Quote
Old April 8th, 2007, 01:42   #6
Kos-Mos
 
Kos-Mos's Avatar
 
Join Date: Nov 2005
Location: LĂ©vis (QC)
If I remember correctly, you will need a standard M3 tap.

just to make sure, go at any hardware store and see if you can fit a m3 nut on your screw, if it fits, then that is your tap.
Kos-Mos is offline   Reply With Quote
Old April 8th, 2007, 02:37   #7
Fidget11
 
Fidget11's Avatar
 
Join Date: Apr 2006
Location: Edmonton, Alberta.
weird.... my guarder kit didnt need to have the part threaded it came fully prepared and ready to be installed. there was no issue at all.

as for part 10 and part 11 i left them out of mine and the slide still locks back on an empty mag. the thing fires 100% and works without them. i couldnt get them back in when i did the upgrade, i emailed WGC about it and was told by them to just leave the parts out.
__________________
Stop Sulking About It! - Prioritize & Organize! - Canadian Airsoft Is Not A Crime!

Primary: G36K
Secondary: FMU SIG P226
Fidget11 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 03:12.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.