looking to upgrade sr-16?

ak_STALKER · January 10th, 2008, 19:17

delete

HaZarD SFD · January 10th, 2008, 19:19

Hurricane spring guide (you will need to cut down the stock bolt about 1/2inch or so.. measure first.

Prometheus MS120SP Spring

Area 1000 Bushings

Honestly I had this setup on my last TM SR-16 and it ran 390.

Oh and a Systema tightbore 6.04. SR-16 Length.. Also had a G&P Ops Silencer 12" on the front

ak_STALKER · January 10th, 2008, 19:21

awesome thanks. was hoping not to have to cut anything. but hell y not.

HaZarD SFD · January 10th, 2008, 19:32

Well when you put it all together and put the stock on and the bolt in it will stick out a bit.. so what you do is mark it off where the bolt starts to go inside the stock and unscrew the bolt and measure from the bottom of the head to the line and then cut that much if not a bit more to compensate for the hurricane spring guide not having a full opening on it.. and the stock will be nice and snug after.. make sure to file the little bur left over too.

ak_STALKER · January 10th, 2008, 19:43

alrighty. thankyou.

Chrios · January 10th, 2008, 21:47

Get an SR 15/25 frontend and perhaps put an m16 inner barrel in it. With a bipod/scope/silencer it makes for a pretty awesome looking sniper platform. In a pinch, or with a carry handle, it makes a nice m16a4-esque assault rifle. I'm assuming this will be an outdoor gun at that velocity, so the longer barrel won't be much of a handicap.

I dont' have a classified ad listed, but there's a spare SR15 frontend kicking around my room. If you want to see what it looks like, email or PM me or something.

Good luck,

ak_STALKER · January 12th, 2008, 15:00

EDITED

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 10th, 2008, 19:17	#1
ak_STALKER Trader rating Join Date: Dec 2007	looking to upgrade sr-16? delete Last edited by ak_STALKER; January 12th, 2008 at 17:25..

January 10th, 2008, 19:19	#2
HaZarD SFD Trader rating Join Date: Sep 2005 Location: Ottawa	Hurricane spring guide (you will need to cut down the stock bolt about 1/2inch or so.. measure first. Prometheus MS120SP Spring Area 1000 Bushings Honestly I had this setup on my last TM SR-16 and it ran 390. Oh and a Systema tightbore 6.04. SR-16 Length.. Also had a G&P Ops Silencer 12" on the front __________________ No Comment.

January 10th, 2008, 19:32	#4
HaZarD SFD Trader rating Join Date: Sep 2005 Location: Ottawa	Well when you put it all together and put the stock on and the bolt in it will stick out a bit.. so what you do is mark it off where the bolt starts to go inside the stock and unscrew the bolt and measure from the bottom of the head to the line and then cut that much if not a bit more to compensate for the hurricane spring guide not having a full opening on it.. and the stock will be nice and snug after.. make sure to file the little bur left over too. __________________ No Comment.

January 10th, 2008, 19:21	#3
ak_STALKER Trader rating Join Date: Dec 2007	awesome thanks. was hoping not to have to cut anything. but hell y not.

January 10th, 2008, 19:43	#5
ak_STALKER Trader rating Join Date: Dec 2007	alrighty. thankyou.

January 10th, 2008, 21:47	#6
Chrios Trader rating Join Date: Sep 2003	Get an SR 15/25 frontend and perhaps put an m16 inner barrel in it. With a bipod/scope/silencer it makes for a pretty awesome looking sniper platform. In a pinch, or with a carry handle, it makes a nice m16a4-esque assault rifle. I'm assuming this will be an outdoor gun at that velocity, so the longer barrel won't be much of a handicap. I dont' have a classified ad listed, but there's a spare SR15 frontend kicking around my room. If you want to see what it looks like, email or PM me or something. Good luck,

January 12th, 2008, 15:00	#7
ak_STALKER Trader rating Join Date: Dec 2007	EDITED

looking to upgrade sr-16?

Upgrades & Modifications