|
|
|
April 9th, 2010, 15:03
|
#1 |
|
ARS Powerup Bulb for 1911/Hicapa/226
 See Illusion's post on page 2, My MEU evidently was not working properly during this test, Illusion has gone through the trouble of doing a proper test. This little think does EXACTLY what it is supposed to.. and BOY does it ever do it well! This little thing goes inside the loading nozzle of your 1911, Hicapa or 226.. If you know what you're doing, installation will take you less than 15 minutes. I have a very highly upgraded Marui MEU, before the ARS part I was using a firefly cylinder bulb. Before the upgrades my chrono results where; 264.4 254.8 245.4 255.3 242.8 Average: 252.54 With that one little part installed my chrono results read; 295.4 298.6 293.2 288.3 276.2 (mag running low on gas) Average: 290.34 Overall Gain from the ARS Powerup bulb: 37.8 FPS... This part is WELL WORTH IT. I'll be using these in all possible pistols from now on 
Last edited by Amos; May 19th, 2010 at 20:03.. |
|
|
|
April 9th, 2010, 15:14
|
#2 |
|
Does it drain more from the mag per shot, is it a more efficient part, or a combination of both?
__________________
  Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur. |
|
|
|
|
April 9th, 2010, 16:02
|
#3 |
|
|
Uhhh lemme go find my gas can and test it out
|
|
|
|
|
April 9th, 2010, 16:20
|
#4 |
|
|
No noticeable change in gas efficiency, my gun is still getting the same 18ish BB/mag
|
|
|
|
|
April 9th, 2010, 18:04
|
#5 |
|
You should be getting at least 270-280 stock, so there's something wrong with your gun.
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
April 9th, 2010, 18:04
|
#6 |
|
|
I'm aware. Thanks for coming out though.
|
|
|
|
|
April 9th, 2010, 18:13
|
#7 |
|
do you think they will make one for KSC guns (read: USP Sys 7)?
|
|
|
|
|
April 9th, 2010, 18:17
|
#8 |
|
|
IIRC, KSC uses a completely different system of floating valve... aaand I don't really think the system is restrictive in any way.. so I don't think there's much of a need to lol
|
|
|
|
|
April 9th, 2010, 18:20
|
#9 |
|
Slow mo.
|
Is that even realistic? 37.8 fps increase? REALLLY!?!?!??!?!
__________________
The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy. - Martin Luther King, Jr. 
|
|
|
|
|
April 9th, 2010, 18:23
|
#10 |
|
|
That's what I thought too...
I had a very good valve in there before.. but comparing them, the ARS one is WAY less restrictive. |
|
|
|
|
April 9th, 2010, 18:26
|
#11 |
|
lol are you sure you didn't just fix something in the process of reassembling it.
Cause you're supposed to get that kind of FPS stock anyways. |
|
|
|
|
|
April 9th, 2010, 18:28
|
#12 |
|
|
I'm 100% certain, when I got my MEU stock it fired around 260... Although all these tests are in a basement with all the windows open, and it certainly isn't a summer day in winnipeg.
I've always written off the lower FPS to the temperature and anorexic magazines. |
|
|
|
|
April 10th, 2010, 02:42
|
#13 |
|
Amos could you take a few photos on how to install,
And supply a vendor link please? regards, Mud
__________________
|
|
|
|
|
April 10th, 2010, 03:34
|
#14 |
|
__________________
|
|
|
|
|
April 10th, 2010, 03:35
|
#15 | |
|
|
Quote:
__________________
|
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
