Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Tanio Koba / KJW M4 GBBR Basic Information and FAQ

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old January 31st, 2011, 20:12   #286
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
Same for me, hoping they release the stanag soon, and not for double the price of the thermold!
audi_bhoy is offline   Reply With Quote
Old January 31st, 2011, 20:19   #287
Saberwing
 
Saberwing's Avatar
 
Join Date: Mar 2007
Location: London, ON
They better not cost $75 a piece... That's fucking ridiculous for a magazine... I'm hoping they're about $40each...
__________________
KJW Mk18 MOD1 BLOCK 2 - Well VSR-10 - Les Baer Ultimate Recon
Saberwing is offline   Reply With Quote
Old February 1st, 2011, 00:20   #288
grantmac
 
grantmac's Avatar
 
Join Date: Jul 2008
Location: Victoria, BC
HKp30-

No camera with me right now so I will try and describe the SCS mod:
The SCS is run on the bucking with the bulge taken off the outside of the bucking. You then have to trial and error grind down the hop-up arm until it isn't overhopping.
I did find that I needed a way to keep the SCS in place, for that I found a thin piece of kydex kept it from getting pushed forward when putting the barrel in. Also a little sticky silicone grease will help it stay in place.

Love the set-screw hop-up you've got going on there. I find that I rarely/never adjust the hop-up on this gun in the field so something like that would work great for me.

I'm curious as to how you modded that barrel to work with the KJW hop-up? I'm not really impressed with either the RA-tech or Cradle barrels.

Cheers,
Grant
grantmac is offline   Reply With Quote
Old February 1st, 2011, 00:35   #289
andrew321
 
andrew321's Avatar
 
Join Date: May 2007
Location: Winnipeg, MB
The EDGI barrel I picked up has been outstanding. It was a KJ ready barrel, no modifying.
andrew321 is offline   Reply With Quote
Old February 1st, 2011, 00:47   #290
HKp30
 
Join Date: Jan 2011
If you did find the need to adjust in the field for some reason, you could always change to a different style screw, I just prefer the flush look along with set it & forget it.

The barrel is the stock KJW barrel, no modification required.

Anyone tried the RA-Tech hop-up bucking?
HKp30 is offline   Reply With Quote
Old February 1st, 2011, 12:26   #291
Saberwing
 
Saberwing's Avatar
 
Join Date: Mar 2007
Location: London, ON
Here's the problem with my tigger: YouTube - KJW M4 Trigger Problem
I've tried cleaning it and greasing it. Nothing has worked yet. Any ideas?
__________________
KJW Mk18 MOD1 BLOCK 2 - Well VSR-10 - Les Baer Ultimate Recon
Saberwing is offline   Reply With Quote
Old February 1st, 2011, 12:35   #292
bshantz
 
bshantz's Avatar
 
Join Date: Feb 2010
Location: Calgary
@Saverwing

My trigger has a late response as well, although I know what my problem is. When I swapped out for a metal receiver one of the trigger springs was in the wrong spot, not by much but it affects the reset.

Try taking apart your lower receiver (I know it may seem like too much work, but its not that bad) and re-assembling it.
Unfortunately there isn't much on the internet on doing this so go by explosion diagrams and also if you have a clear lower, it makes it easier as well.

Hope this helps
__________________


-----
"Weakness of attitude becomes weakness of character."

bshantz is offline   Reply With Quote
Old February 1st, 2011, 16:38   #293
grantmac
 
grantmac's Avatar
 
Join Date: Jul 2008
Location: Victoria, BC
Quote:
Originally Posted by HKp30 View Post
If you did find the need to adjust in the field for some reason, you could always change to a different style screw, I just prefer the flush look along with set it & forget it.

The barrel is the stock KJW barrel, no modification required.
I thought you had a PDI tightbore modified to work?

-Grant
grantmac is offline   Reply With Quote
Old February 1st, 2011, 18:33   #294
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
@bshantz Were did you find a spare metal lower?
audi_bhoy is offline   Reply With Quote
Old February 1st, 2011, 18:57   #295
HKp30
 
Join Date: Jan 2011
Quote:
Originally Posted by grantmac View Post
I thought you had a PDI tightbore modified to work?

-Grant
O, haha, I thought you were talking outer barrel.

Yes the tight bore is a PDI
HKp30 is offline   Reply With Quote
Old February 1st, 2011, 20:01   #296
bshantz
 
bshantz's Avatar
 
Join Date: Feb 2010
Location: Calgary
@ audi_bhoy

I purchased two of them through a local retailer. Unfortunately, he does not have any more, and I was only fortunate enough to get them because he wasn't using them.

Try asking your local retailer.
__________________


-----
"Weakness of attitude becomes weakness of character."

bshantz is offline   Reply With Quote
Old February 1st, 2011, 22:11   #297
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
So, if you have 2 of them, you might have one sitting around? Yeah I'd figure that only retailers could have those, but it seems I can only have access to plastic ones, and I've already got one on it...
audi_bhoy is offline   Reply With Quote
Old February 2nd, 2011, 00:21   #298
Fireboy
 
Fireboy's Avatar
 
Join Date: Dec 2006
Location: Alberta, Earth
Nay. Bshantz sold one of his fmu gbbrs to me. .

Regarding the mags from cradle. I'm not chums with him but when I asked about them he replied that things were close to being done HOWEVER because they were initially using real stanag shells they ran into export issues with ITAR. They are mod things right now and from what I understand they are going to do. Custom made shell so there won't be ITAR issues.
__________________

Last edited by Fireboy; February 2nd, 2011 at 00:25..
Fireboy is offline   Reply With Quote
Old February 4th, 2011, 17:53   #299
Pinard
formerly Contractor 6-8, CptPinard17eRAM
 
Pinard's Avatar
 
Join Date: Apr 2010
Location: Quebec
HOW THE HECK do I loose the castle nut ? mine is all scratched now even with plyers...it doesn't budge...
__________________
Retired chairsofter

Last edited by Pinard; February 4th, 2011 at 18:25..
Pinard is offline   Reply With Quote
Old February 4th, 2011, 18:57   #300
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
For your metal body I could send you a barrel wrench

Anyone has hints on where to find a metal lower body? I do want one badly these days!!
audi_bhoy is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 15:12.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.