H&k 416

Drache · June 14th, 2008, 02:28

Quote:

Originally Posted by M0nKeY

then switch to shaw high speed and say no to slow!

would if I could but ADSL is not even available where I live....

Qlong · June 14th, 2008, 02:38

Thats a nice lookin scope there, but I still like the looks of an ACOG better.

PaCHeKo! · June 15th, 2008, 10:07

Any spring & tight bore recommendation for my VFC HK416? 400fps is my limit.

Thank you!

Crunchmeister · June 15th, 2008, 13:16

An M120 spring would bring you close to the 400 fps mark. However, if you plan on installing a tightbore, you may want to get a lighter spring. My stock 416's spring "settled" to 390 fps (down from 420-430). I was very happy with this. I installed the barrel extender and an M4-length tightbore. Now I'm shooting in the 410-415 range with it. An M110 may be a better choice.

Any good stainless steel tightbore should be fine. I have no idea what brand mine is since I bought it used and the original owner had done the same. I did install a PDI tightbore in my M15 rifle and I'm quite happy with it. A lot of people seem to like the Madbull Black Python as well. I haveone in my Glock 17 and it performs really well. Not the same as an AEG length barrel, but it works well in my pistol.

And thanks to whatever mod cleaned the 'junk' out of this thread.

PaCHeKo! · June 15th, 2008, 21:30

Thank you Crunchmeister for the advices! I might go for a M110...

Crunchmeister · June 15th, 2008, 21:46

An M110 should theoretically put you in the 360-ish range. Depending on your barrel length, a tightbore may get you at least another 15-20 I would say, based on my results. You won't be at 400, but 380-ish is still pretty damn respectable. I know my M15 shoots 360 and I wouldn't change a thing with it the way it shoots. My number may be a bit off, but with an M110 and a tightbore, you'll be in the high 300s. With a 120, there's a good possibility you may end up over the 400 mark.

Blackspeed416 · June 17th, 2008, 19:13

Quote:

Originally Posted by PaCHeKo!

Any spring & tight bore recommendation for my VFC HK416? 400fps is my limit.

Thank you!

I'm answering from my phone.
Guarder 110sp brought mine to a 398.1 high and 395 average with .20 and a very stable 350 with .25 +- less than one fps.

TokyoSeven · June 17th, 2008, 19:18

Oh wow, my guarder SP110 gave me 448fps. However I think it was misslabled. I recently swapped to a modify 90 or 100. I actually cant remeber. I will have to douche check, it was tossing out BBs as a very consistant 389fps with .20s.

PaCHeKo! · June 17th, 2008, 19:56

Ishhhh 398fps I can't install a tightbore at that velocity..

Blackspeed416 · June 17th, 2008, 20:44

Quote:

Originally Posted by PaCHeKo!

Ishhhh 398fps I can't install a tightbore at that velocity..

I have a tightbore installed.

Blackspeed416 · June 17th, 2008, 21:00

Quote:

Originally Posted by Qlong

Thats a nice lookin scope there, but I still like the looks of an ACOG better.

ACOG's are nice but this is more funcitional.
Most Airsoft ACOG's are just red dots and G&P makes a nice 4x32 rep with no illumination.This one has Red Green Lum and is 2-7x32 so I can use it for both CQB with 2xpower and watching where my BB's land on distance shots with the 4-6xpower. The quick releases is a plus warranty is good as well.
JMO

Drache · June 19th, 2008, 20:07

Here's with the silencer on....

Blackspeed416 · June 20th, 2008, 12:25

Looks Good

Drache · June 20th, 2008, 12:58

Thanks! All it needs now is a VN mag to complete the exterior looks.....

Bissa · June 27th, 2008, 00:14

I just got my gun back. I got to game it on Sunday, after about 1500 rounds (I was doing a lot of suppressing fire) it is shooting ≈ 370 with .25s. It is a laser though almost dead on horizontally at 250 feet (I think I’m not incredibly good at distance estimations). i had to replace the hop up, and entire upper gear box, and the "brand new" barrel was rusted to the point that it would have failed catastrophically if used.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 15th, 2008, 10:07	#288
PaCHeKo! Trader rating Join Date: Jan 2008 Location: St-Jérôme, Québec	Any spring & tight bore recommendation for my VFC HK416? 400fps is my limit. Thank you! __________________ P.M.C. - Prostituée Militaire de Campagne.

June 15th, 2008, 13:16	#289
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	An M120 spring would bring you close to the 400 fps mark. However, if you plan on installing a tightbore, you may want to get a lighter spring. My stock 416's spring "settled" to 390 fps (down from 420-430). I was very happy with this. I installed the barrel extender and an M4-length tightbore. Now I'm shooting in the 410-415 range with it. An M110 may be a better choice. Any good stainless steel tightbore should be fine. I have no idea what brand mine is since I bought it used and the original owner had done the same. I did install a PDI tightbore in my M15 rifle and I'm quite happy with it. A lot of people seem to like the Madbull Black Python as well. I haveone in my Glock 17 and it performs really well. Not the same as an AEG length barrel, but it works well in my pistol. And thanks to whatever mod cleaned the 'junk' out of this thread. __________________

June 15th, 2008, 21:30	#290
PaCHeKo! Trader rating Join Date: Jan 2008 Location: St-Jérôme, Québec	Thank you Crunchmeister for the advices! I might go for a M110... __________________ P.M.C. - Prostituée Militaire de Campagne.

June 14th, 2008, 02:38	#287
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	Thats a nice lookin scope there, but I still like the looks of an ACOG better.

June 15th, 2008, 21:46	#291
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	An M110 should theoretically put you in the 360-ish range. Depending on your barrel length, a tightbore may get you at least another 15-20 I would say, based on my results. You won't be at 400, but 380-ish is still pretty damn respectable. I know my M15 shoots 360 and I wouldn't change a thing with it the way it shoots. My number may be a bit off, but with an M110 and a tightbore, you'll be in the high 300s. With a 120, there's a good possibility you may end up over the 400 mark. __________________

June 17th, 2008, 19:18	#293
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	Oh wow, my guarder SP110 gave me 448fps. However I think it was misslabled. I recently swapped to a modify 90 or 100. I actually cant remeber. I will have to douche check, it was tossing out BBs as a very consistant 389fps with .20s. __________________ "Its only a little bit on fire"

June 17th, 2008, 19:56	#294
PaCHeKo! Trader rating Join Date: Jan 2008 Location: St-Jérôme, Québec	Ishhhh 398fps I can't install a tightbore at that velocity.. __________________ P.M.C. - Prostituée Militaire de Campagne.

June 19th, 2008, 20:07	#297
Drache BALLET, TYPE: SELF LOATHING, ANALBURST Trader rating Join Date: Oct 2005	Here's with the silencer on....

June 20th, 2008, 12:25	#298
Blackspeed416 Trader rating Join Date: Jul 2007	Looks Good __________________ VFC HK416D 14.5RS Laylax Mode-2 Suppressor Hurricane EOTech 551 RICO Alpha 9 Tactical Light KM TN Teflon coated 6.04 barrel Stock Gearbox Systema Magnum Motor FTW!!! Phantom Ciras RS CAA 6 Position Retractable Stock S Arms M4 160rd Midcap Magazines Magpul PTS Enhanced Trigger Guard Magpul PTS MIAD Grip Kit Magpul Ranger Plates NcStar Mark III Advance Tactical Compact Scope

June 20th, 2008, 12:58	#299
Drache BALLET, TYPE: SELF LOATHING, ANALBURST Trader rating Join Date: Oct 2005	Thanks! All it needs now is a VN mag to complete the exterior looks.....

H&k 416

Airsoft Media