Dual Radio PTT

[snaven]

Hey everyone,

I need some help answering some questions. I want to buy a Silynx C4Ops or the fake version from Z tac Z119 which is most likely since I don't want to pay 500$ for airsoft. Now I did the whole google thing and called some companies but no one can help me, can I plug 2 X kenwood radios???? I have a Puxing and Wouxun and I want to plug them both at the same time. HOW DO I DO THAT!!!!!!! lol please don't post BS response I wasted enough time already if you cant help me then don't, I just want to know what I can use and where to get it, really hope someone can help me

Thanks!!

[R.I.T.Z]

there are 2 cables, one is hardwired, the second is the option cable which allows you to plug in the same type of connector or a different one.

example.
you buy the 2ppt version with a hardwired kenwood pin
then you buy the optional cable which allows you to plug in a Motorola, Kenwood or other radio

[Cobrajr122]

Yes, you can connect 2 Kenwood 2 pin radios to the Dual radio PTT.
You just need 2 of the kenwood 2 pin down leads.

Unless the people on the radios have VERY distinctive voices, or VERY good voice protocol good luck ever telling the 2 nets apart.

The best way to do this would be to get a dual comm headset that allows each net to be played in separate ears, then either have 2 PTTs, or a single dual PTT that splits the signal to the correct ear.

[snaven]

cause I looked at this model and it ssems to say the non-kenwood cable wont take kenwood which makes no sense to me....if I get 2 cable and plug them why wouldn't it work http://shop.ehobbyasia.com/media/cat...-tn_2_mark.jpg

[snaven]

And im the radio guy I use my dual channel for my team but the other radio would stay on Admin in case theres some info or I need to send info to the command team

[danhay]

The Kenwood version of the ZTac Z4Ops works very well. I run mine with a pair of Puxing Px888s. You likely will not be able to use the non-Kenwood model with your radios due to different pin outs (or whatever) on the headset jacks.

[snaven]

could I use two kenwood type on this if I buy 2 cable? http://mach1airsoft.com/product/elem...te-edition-de/

[snaven]

even that's fine but will it work lol http://mach1airsoft.com/product/elem...te-edition-de/

im not keen about trying and returning stuff that doesn't work and I cant believe how hard it is to find people using this