Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

XM108HP doesnt hold gas - Need advice

:

Doctor's Corner

Reply
 
Thread Tools
Old June 25th, 2012, 11:55   #1
ap27
 
ap27's Avatar
 
Join Date: Jun 2010
Location: Milton, ON
XM108HP doesnt hold gas - Need advice

I have a strange issue now. I reassemble it correctly (as mentioned in the other thread), but it doesn't hold gas. When I fill it, all the gas comes out through the BB holes and when I open it up again, two of the bearings have fallen out of the valve into the lower half where the spring/plunger sit.

Any ideas?
__________________
H&K G36c (KWA) / Glock 18c (TM) / Kimber LAPD SWAT Custom (TM) / Mossberg M500 (ACM)

ap27 is offline   Reply With Quote
Old June 25th, 2012, 12:42   #2
Jugglez
 
Join Date: Feb 2005
Location: Swimming in a pool of Xpresspost receipts.... Toronto - 400/401
It is normal for bearings to fall out during disassembly.

It's probably not primed. After assembly, push the release valve all the way up with a screwdriver.. you should feel the bearings reset

Other possibilities are one or more warped bearing holes in the main gas valve, or damaged o-rings. Inspect them all before re-assembly.
__________________
Jugglez is offline   Reply With Quote
Old July 20th, 2012, 00:24   #3
shootersaber
 
Join Date: Nov 2011
I think it is the big o-ring problem.
shootersaber is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 13:24.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.