|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
March 2nd, 2006, 13:23
|
#1 |
|
KJW FM M92F Inner Barrel
I was disassembling my gun & in the barrel there was a small steel pin that i can't remove. Is there a tool to remove it?
here a pic of what am talking about: 
|
|
|
|
|
March 2nd, 2006, 16:16
|
#2 |
|
I don't think there is a specific tool for that pin. I use one of those tiny screwdrivers and a hammer. The pin comes out easy. Just make sure you are not hitting too hard.
__________________
Op Woodsman. Biggest WW2 event in Ontario. |
|
|
|
|
March 2nd, 2006, 16:47
|
#3 |
|
I used a tiny hole punch and i...er...kinda broke the punch
 . I think this pin is welded to the barrel or something because it would not budge at all :?.Any ideas? |
|
|
|
|
|
March 2nd, 2006, 17:07
|
#4 |
|
Sounds like your hole punch is larger then the hole you want to remove the pin from (that's what the ladies keep telling me when I try that).
You need a smaller pin or nail to push out the pin.
__________________
|
|
|
|
|
March 5th, 2006, 08:38
|
#5 |
|
I think i need a tool because it looks like it's pressure fitted
 http://img48.imageshack.us/img48/9697/dsc004851gt.jpg http://img232.imageshack.us/img232/8977/dsc004877nf.jpg I've tried a nail but it makes no difference... |
|
|
|
|
|
March 5th, 2006, 08:53
|
#6 |
|
Mr. Silencer
|
You hammer it out, but a nail won't work. If you have a flathead small enough to fit that, then go for it. Hit the edge, not the centre.
|
|
|
|
|
March 5th, 2006, 12:39
|
#7 |
|
http://www.wgcshop.com/pcart/shopper...0cc6e2a393c096
if you must spend money i'd still try a nail and hammer, just a matter of finding the right size. |
|
|
|
|
|
March 12th, 2006, 12:50
|
#8 |
|
I got the pin out using a tiny 4 head screw. The only problem was that the new inner barrel didn't fit on it because there was indent on the original barrel soo... i used my leatherman & filed it down to the right indent.
 pics: http://img96.imageshack.us/img96/8965/19da.jpg http://img478.imageshack.us/img478/6238/21qn.jpg Original Barrel: http://img511.imageshack.us/img511/8880/51zv.jpg Modded Barrel: http://img57.imageshack.us/img57/277/34un2.jpg http://img478.imageshack.us/img478/4118/47kw1.jpg |
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
