Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Mosfet reliability and failure modes

:

Upgrades & Modifications

Reply
 
Thread Tools
Old July 19th, 2013, 15:57   #1
TheYellowDart
Myoga
 
Join Date: Aug 2003
Location: Vancouver, BC
Mosfet reliability and failure modes

How are today's off the shelf airosft mosfets in terms of reliability and failure mode?

The first and last time I tried using a mosfet a couple of years ago, it fried after less than a couple dozen shots over the course of two days. It failed closed, so the aeg wouldn't stop firing on full auto until I unplugged the battery. Freaked out my wife too.

I'm thinking about trying a mosfet again, but don't want it to fail and get stuck on full auto. Especially if using a Lipo in a sealed up buffer tube that's cumbersome to get to.
TheYellowDart is offline   Reply With Quote
Old July 19th, 2013, 16:25   #2
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
don't buy a cheap mosfet unit. I swear by extreme-fire.com products because of Terry's overwhelmingly good service and track record. He has a very low failure rate and his units are very well built.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old July 19th, 2013, 17:24   #3
wind_comm
 
wind_comm's Avatar
 
Join Date: Jul 2011
Location: Calgary/Vancouver
if you really dont want it to fail, get an extreme-fire.

there are also plenty of homemade fets from reputable makers on ASM.
__________________
too busy tinkering to play.
wind_comm is offline   Reply With Quote
Old July 19th, 2013, 18:11   #4
K3vX
 
K3vX's Avatar
 
Join Date: May 2012
Location: Quebec City
Speaking of ExtremeFire mosfet. Can you disable the AB on the computerized FETs?
Which one would you recommend for ROF control without AB.
K3vX is offline   Reply With Quote
Old July 19th, 2013, 18:45   #5
RaisinBran
 
RaisinBran's Avatar
 
Join Date: Sep 2008
Location: Burnaby,BC
Look for a hamster fet on ASM, apparently they are amazing and I have one on the way.
__________________
Armoury:
TM M4A1
ICS M4A1
JG M4A1
RaisinBran is offline   Reply With Quote
Old July 19th, 2013, 19:18   #6
cetane
 
cetane's Avatar
 
Join Date: Jun 2010
Location: Markham & Stouffville - Ontario - Canada
The gate ones stealth has on airsoftstore.ca ok too
cetane is offline   Reply With Quote
Old July 19th, 2013, 19:51   #7
Oshiha
 
Oshiha's Avatar
 
Join Date: Jun 2012
Location: Edmonton, Alberta
The cheetah 2N with triggermaster software let's you turn AB on and off, and let's you control the ROF as well. I have one and it was a great investment. Any problems, and terry usually replies to you in about 24 hours.
__________________
Team VG93
AEG : Custom G&P VLTOR M4
Magpul Masada ACR

Bolt action: Tokyo Marui VSR-10 GSPEC
Oshiha is offline   Reply With Quote
Old July 19th, 2013, 19:53   #8
KenTsui
 
Join Date: Dec 2011
I've been using my home-made 3034 mosfet for over 3 years now. Still works fine.
KenTsui is offline   Reply With Quote
Old July 19th, 2013, 19:56   #9
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
Gate merf 3.2. Nuff said. All the features you can shake a stick at round 60 bucks.
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft
Hectic is offline   Reply With Quote
Old July 19th, 2013, 20:32   #10
K3vX
 
K3vX's Avatar
 
Join Date: May 2012
Location: Quebec City
Quote:
Originally Posted by Hectic View Post
Gate merf 3.2. Nuff said. All the features you can shake a stick at round 60 bucks.
This one's nearly perfect, except I want the ability to turn AB on and off, and I'm stuck with deans (not a con, but I can't try other things).
K3vX is offline   Reply With Quote
Old July 19th, 2013, 20:48   #11
Ron-E
reneorantes
 
Ron-E's Avatar
 
Join Date: Jan 2013
Location: Hamilton, Ontario
I have installed 4 MERF 3.2s on 4 different rifles and have yet to see one fail. I run them on 2 of my own rifles, not able to turn off AB sucks but the other features make up for it.
Ron-E is offline   Reply With Quote
Old July 19th, 2013, 21:07   #12
TANNER
ChrisUK
 
TANNER's Avatar
 
Join Date: Aug 2008
Location: Toronto
+1 for the Gate fet's from airsoftstore. Never had one fail. Not a huge fan of the Xtreme fire fets as I always worry about the wires falling out (which they do often).
__________________
TANNER is offline   Reply With Quote
Old July 20th, 2013, 17:39   #13
IggysPiggy
 
Join Date: Sep 2007
No matter what anyone says or builds Terry's track record can't be beat. Extreme-fire all the way.
IggysPiggy is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 08:46.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.