Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Tokyo Marui M4A1 Carbine & Colt M16A2 (Inquiry)

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old July 31st, 2019, 11:44   #1
Marc.Woodall
 
Join Date: Jun 2018
Location: Toronto, Ontario
Exclamation Tokyo Marui M4A1 Carbine & Colt M16A2 (Inquiry)

Currently located in Toronto Area:

As mentioned below, the air-soft guns are approximately from 2002 and were not legally imported into Canada, take a look!

M4a1 Carbine (Tokyo Marui AEG)
Colt M16a2 (Tokyo Marui AEG)
Leapers 4 x 20 Optic

Dropbox (Images):
https://www.dropbox.com/sh/bfem6xn3p...O6hspyMHa?dl=0

I have recently received these air-soft guns and have been working to gather as much information on them as possible. they are (according to the paperwork and history) from around 2002 and were not legally imported into Canada. I have only inspected the externals at this moment, and am simply looking for more information about these guns should anyone have any insight (possibly looking sell).

Currently the photographs are mobile snapshots, high resolution images will be uploaded by the end of the week for a closer look!

Last edited by Marc.Woodall; July 31st, 2019 at 11:59..
Marc.Woodall is offline   Reply With Quote
Old July 31st, 2019, 12:51   #2
Ratters
 
Ratters's Avatar
 
Join Date: Jul 2003
Location: Vancouver
tm m4a1

These models were indeed brought into Canada as I worked directly with a man who imported them, 20 years ago, (approx)

I did also own the M4A1 and SR15(16) models at the time.

From what i know the Old skool Tm m4/m16 line up used twin Allen bolts to hold the Barrel into the locking nut/ barrel brace. This was a weak point and regularly came loose. Some blue locktite would solve this for a while providing the bolts weren't over-tightened and stripped out. in this circumstance a careful tap job and larger bolts were installed.

The early M4/16 guns also used the two-piece hop chamber. There is still an argument today about which is more effective.

Upgraded, metal feed tubes were available at the time and did perform very well with some mild or no doctoring, direct screw on replacement often anodized.

The one-piece hop unit was born and people owning TM guns would cut a notch for it to work in their lower receivers or they would swap the guts from a TM an install them into Classic Army bodies.

Word of caution: keep loctite well away from any of the plastic as it will soften it and nobody likes screws that vanish during tightening. irreparable damage will be done.

When the SR15(16) came along the issue was kind of solved by installing an additional two-piece bracket for additional structural support under the handguard and an upgraded, 1000 motor, up from the typical 700 (I believe)

This was a transitional time for TM because new manufacturers were becoming direct competition and jeopardizing sales. This was also the boom time for importation to the west and interest in airsoft was exploding globally. The TM clone war had begun.

Typically, in regards to TM aegs people would swap out the nylon bushings, sector gear(alloy), piston / head, nozzle and selector plate and do the (as it was known) 120 spring upgrade. Systema barrel upgrades were also popular.

This made the guns incredibly reliable and effective on the field.
__________________
Canīt sleep. Clowns will eat me!

Last edited by Ratters; July 31st, 2019 at 17:01.. Reason: added info, corrected spelling errors
Ratters is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 13:07.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.