Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Full auto on Semi issue, With 11.1.

:

Doctor's Corner

Reply
 
Thread Tools
Old July 9th, 2016, 15:59   #1
Chromey
Whiny Attention Whore
 
Chromey's Avatar
 
Join Date: Jul 2013
Location: Acton, On
Full auto on Semi issue, With 11.1.

I just bought a G&G M14 EBR with a Gate NanoAB.

It runs perfect on a 7.4 lipo, But with a 11.1, Semi runs at full auto.

Any suggestions are appreciated
__________________
B.A. Level 3 Cert.
Chromey is offline   Reply With Quote
Old July 9th, 2016, 16:32   #2
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Please don't add posts like that. It's worse than posting nothing.
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old July 9th, 2016, 16:35   #3
Tshiip
 
Join Date: Feb 2016
Location: Behind you
Noted. My bad. Deleted the post
__________________
You should always know that you don't know.
Tshiip is offline   Reply With Quote
Old July 9th, 2016, 16:53   #4
Chromey
Whiny Attention Whore
 
Chromey's Avatar
 
Join Date: Jul 2013
Location: Acton, On
damn missed it... Thanks anyways?


Still need help. Sorry if im dumb?
Sorry if im not asking the question properly
__________________
B.A. Level 3 Cert.
Chromey is offline   Reply With Quote
Old July 9th, 2016, 17:24   #5
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
Could be the motor isn't strong enough for the breaking to stop the motor, altho on semi it is mechanical cutoff if could be the cutoff lever is having a hard time disengaging the trigger shuttle thing.
Perhaps just run it on a 7.4 until you need to repair or replace something the sort it out?
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft
Hectic is offline   Reply With Quote
Old July 9th, 2016, 21:27   #6
Jaco14
 
Jaco14's Avatar
 
Join Date: Jun 2012
Location: Georgetown
Sounds like the increased voltage is cycling the gearbox faster than the contact shuttle can get into position to be kicked out by the cutoff lever. The cutoff lever then sticks on top of the shuttle causing full auto until the trigger is released and shuttle resets
Currently happening in my m1 garand (m14 ver.7 gearbox)
Jaco14 is offline   Reply With Quote
Old July 10th, 2016, 01:22   #7
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Quote:
Originally Posted by Hectic View Post
Could be the motor isn't strong enough for the breaking to stop the motor
AB will stop a ferrite magnet motor wired for high speed while moving heavyweight triple torque gears. Regardless, if the motor was braking, it would mean the signal was cut, which means the trigger is no longer engaged. It's not physically possible for it to continue shooting if contact was broken.

Actually just fixed this similar problem on someone's gun last night, issue was the cutoff lever not functioning properly.
Once the cutoff lever breaks the trolley from the contacts, there's no more signal. Once there's no more signal, the mosfet brakes the motor. It's not possible to turn the signal back on until you release the trigger, pickup the trolley, and squeeze again.
So the issue is contact is not being broken, therefore; cutoff problem.
ThunderCactus is offline   Reply With Quote
Old July 10th, 2016, 09:41   #8
Chromey
Whiny Attention Whore
 
Chromey's Avatar
 
Join Date: Jul 2013
Location: Acton, On
Ordering a new cut off lever.

I get a 2 shot burst on semi now with a 11.1.
__________________
B.A. Level 3 Cert.
Chromey is offline   Reply With Quote
Old July 10th, 2016, 09:51   #9
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
would say it's most likely the cutoff lever. If after confirming it's functioning properly, it will be overspin as the next issue, or the contacts pinching the shuttle too tightly.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old July 10th, 2016, 10:15   #10
Chromey
Whiny Attention Whore
 
Chromey's Avatar
 
Join Date: Jul 2013
Location: Acton, On
Ill check the shuttle when i open it up to do the Spring.

Thanks for all the help guys.
__________________
B.A. Level 3 Cert.
Chromey is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 04:34.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.