Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

G&P outer barrel question...

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old December 31st, 2012, 15:55   #1
ssrc30
 
Join Date: Oct 2008
Location: I live in Grande Prairie Alberta
G&P outer barrel question...

I would like to replace my aeg's outer barrel with something a little different. I'm just wondering if a Dytac Night Hawk would fit? I know they are made for the WA and TM but not sure if it will fit my aeg.
__________________
"Do not touch anything unnecessarily. Beware of pretty girls in dance halls and parks who may be spies, as well as bicycles, revolvers, uniforms, arms, dead horses, and men lying on roads -- they are not there accidentally."

Soviet infantry manual, issued in the 1930's
ssrc30 is offline   Reply With Quote
Old January 1st, 2013, 02:10   #2
shootersaber
 
Join Date: Nov 2011
Quote:
Originally Posted by ssrc30 View Post
I would like to replace my aeg's outer barrel with something a little different. I'm just wondering if a Dytac Night Hawk would fit? I know they are made for the WA and TM but not sure if it will fit my aeg.
you buy the TM version is ok, it is for AEG
shootersaber is offline   Reply With Quote
Old January 1st, 2013, 10:25   #3
ssrc30
 
Join Date: Oct 2008
Location: I live in Grande Prairie Alberta
Quote:
Originally Posted by shootersaber View Post
you buy the TM version is ok, it is for AEG


Thank you. I will order one of those. I found my 10" barrel a bit short so I'm going to move up to a 12" barrel.
__________________
"Do not touch anything unnecessarily. Beware of pretty girls in dance halls and parks who may be spies, as well as bicycles, revolvers, uniforms, arms, dead horses, and men lying on roads -- they are not there accidentally."

Soviet infantry manual, issued in the 1930's
ssrc30 is offline   Reply With Quote
Old January 1st, 2013, 11:41   #4
L473ncy
 
L473ncy's Avatar
 
Join Date: Oct 2004
Location: 11-30-24-1W5
Another option is to get a 2" barrel extension. They exist but I don't know who makes them. IIRC VFC has one and Madbull may have one (and I assume there are ACM and Element versions out there) but look around at other companies if you want.

ie. looks like this - CCW to CCW threading: http://shop.ehobbyasia.com/accessori...n-ccw-ccw.html

NB: G&P barrels are CW threading so if you get a barrel extension you must get a CW to CW extension if you want to keep the original flash hider (or CW to CCW if you want to change your flash hider appropriately).
__________________
ಠ_ಠLess QQ more Pew Pew
READY TO >> RACE
L473ncy is offline   Reply With Quote
Old January 13th, 2013, 21:33   #5
ssrc30
 
Join Date: Oct 2008
Location: I live in Grande Prairie Alberta
Yeah I'm gonna go with the extension. Thanks for the advice. Sorry it took so ling for me to get back to you.
__________________
"Do not touch anything unnecessarily. Beware of pretty girls in dance halls and parks who may be spies, as well as bicycles, revolvers, uniforms, arms, dead horses, and men lying on roads -- they are not there accidentally."

Soviet infantry manual, issued in the 1930's
ssrc30 is offline   Reply With Quote
Old January 14th, 2013, 00:15   #6
Socks
 
Socks's Avatar
 
Join Date: Aug 2012
hate to bump this but how on earth do you remove the outer barrel from the top rail assembly.

i have every possible screw removed but the one piece upper with rails doesnt want to separate from the barrel
Socks is offline   Reply With Quote
Old January 14th, 2013, 01:14   #7
L473ncy
 
L473ncy's Avatar
 
Join Date: Oct 2004
Location: 11-30-24-1W5
What?

Is it a freefloat rail or does it use a delta ring assy.? If the latter you need an AR wrench if the former what kind of rail is it?
__________________
ಠ_ಠLess QQ more Pew Pew
READY TO >> RACE
L473ncy is offline   Reply With Quote
Old January 14th, 2013, 18:36   #8
Socks
 
Socks's Avatar
 
Join Date: Aug 2012
the rails are not removable, they are one solid piece with the upper receiver

its a g&p mrp
Socks is offline   Reply With Quote
Old November 2nd, 2019, 00:10   #9
Socks
 
Socks's Avatar
 
Join Date: Aug 2012
Bump still cant get this thing off
Socks is offline   Reply With Quote
Old November 4th, 2019, 07:05   #10
BobbyDangerous
 
BobbyDangerous's Avatar
 
Join Date: Mar 2010
Location: Oshawa
Quote:
Originally Posted by Socks View Post
Bump still cant get this thing off
The Hex screws on the bottom of the RAS by the lower receiver. Loosen them up and pull the barrel out. Should be like the Real LMT.

Spray some silicone oil in there as well. you're just going to have to wiggle it. Was prob assembled fresh and the dust coating on the rail has prob glued with the outer barrel joint..
__________________
-Dangerous-

BA Level 3 Certified

Last edited by BobbyDangerous; November 4th, 2019 at 07:08..
BobbyDangerous is offline   Reply With Quote
Old November 7th, 2019, 22:31   #11
Socks
 
Socks's Avatar
 
Join Date: Aug 2012
Quote:
Originally Posted by BobbyDangerous View Post
The Hex screws on the bottom of the RAS by the lower receiver. Loosen them up and pull the barrel out. Should be like the Real LMT.

Spray some silicone oil in there as well. you're just going to have to wiggle it. Was prob assembled fresh and the dust coating on the rail has prob glued with the outer barrel joint..
Ended up blasting it with wd40 and letting it sit for a while. No amount of wiggling could get it loose so I used a hammer and it popped off finally.

Thanks!
Socks is offline   Reply With Quote
Old November 8th, 2019, 00:00   #12
RainyEyes
 
RainyEyes's Avatar
 
Join Date: Sep 2013
Location: Scarbororororough
Quote:
Originally Posted by Socks View Post
so I used a hammer and it popped off finally.

Thanks!
Although it took 6 years props to you for never giving up
RainyEyes is offline   Reply With Quote
Old November 8th, 2019, 05:34   #13
BobbyDangerous
 
BobbyDangerous's Avatar
 
Join Date: Mar 2010
Location: Oshawa
Quote:
Originally Posted by RainyEyes View Post
Although it took 6 years props to you for never giving up

:lol:
__________________
-Dangerous-

BA Level 3 Certified
BobbyDangerous is offline   Reply With Quote
Old November 8th, 2019, 05:35   #14
BobbyDangerous
 
BobbyDangerous's Avatar
 
Join Date: Mar 2010
Location: Oshawa
correct me if im wrong but i think that its tapered like the VFC barrels which is pro why it was nice and snug
__________________
-Dangerous-

BA Level 3 Certified
BobbyDangerous is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 21:12.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.