Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

What are people looking for in an airsoft gun?

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old June 10th, 2016, 22:33   #1
Chinchy
 
Join Date: Jan 2010
What are people looking for in an airsoft gun?

This is going to be a short and concise post. So was wondering of a general idea of what people want in their guns, I personally like to balance reliability/speed IE 40+ RPS builds that last. The reason I'm asking around is I'll be starting up a small custom build business and am looking for some builds people would want, I can eek out a 45RPM 380-90FPS BB .2 build that can last on a 14.8v for just under $550 + Time spent is that a reasonable price for a build like that, or am I way off? I'm good at teching but do not know the price range people want to spend on a gun that will not need any upgrading. Thanks for the replies!

Also here is the build I'm talking about, mind the wires didn't have to wire it like that but originally I was using thick cased 14 awg wiring to handle the 14.8v properly I recently got high temp high purity 14 that can fit through the back for rear wiring to the stock. So that "mess" although funny when people comment on it is gone.

Youtube Link: https://youtu.be/lH00QWernFQ
Chinchy is offline   Reply With Quote
Old June 11th, 2016, 02:27   #2
RainyEyes
 
RainyEyes's Avatar
 
Join Date: Sep 2013
Location: Scarbororororough
Good accuracy + reliability + hair trigger and durability.

Rps is one thing but so is trigger response and precision. Stock barrel w/ stock hop up is kind of a flaw if you gear up the rps.

Most builds usually go much higher than $550. Even a stock vfc is 300 + gearbox parts + barrel + motor can rack up more than your desired quote.
RainyEyes is offline   Reply With Quote
Old June 11th, 2016, 05:32   #3
Windows
 
Join Date: May 2008
Location: Burnaby BC
When I think about AEGs I want to see on shelves, I think:

V2 compatible gearbox with a motor cage
Quick Change spring system
Electronic trigger and fire control with a nice snappy feeling.
Pre-cocking for bonus points
Stops shooting on empty magazine
Non- blow back
Spring release mechanism
Gear box and receiver made out of something other than pot metal.
Stainless inner barrel
Rotary hopup (ie not gears or slider)
AOE corrected
Good shimming.
Properly lubricated
Good magazine compatibility
10-14 inch barrel
Ambi- safety
No wobble

Everything else is just gravy
__________________
In the North? Want to play airsoft with us? Send me a message!
Windows is offline   Reply With Quote
Old June 11th, 2016, 09:06   #4
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
consistent manufacturing tolerance and compatbility with off the shelf parts. Quality externals that don't wobble, hop up unit that stays where it's adjusted to.

Since I upgrade guns for people I don't really care about performance, that can be fixed.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old June 11th, 2016, 13:15   #5
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Things I want from my airsoft gun;
Modular components - gearbox is one piece, cylinder is one piece, barrel group is one piece, interchangeable lower receiver with any other of the same gun, etc

Factory parts that DON'T need to be upgraded - Nothing worse than buying a $500 gun and having to throw in $500 of upgrade parts to get it where you want it. High quality stuff.

20-30rps, quick trigger response, short trigger pull

Incredibly tight tolerance on all components - ensures no messing around with a dremel or filing shit, also increases accuracy through rigidity

Ridiculously easy to work on - taking a gun and mechbox apart to re-grease a cylinder is stupid. I just want each core component to pop out individually so I can work on it.

Actually now that I list all the stuff, pretty sure someone already makes that gun...
ThunderCactus is offline   Reply With Quote
Old June 11th, 2016, 13:55   #6
Ricochet
How much sand CAN you fit in your vagina!?
 
Join Date: Feb 2008
Location: North Delta, BC (Greater Vancouver)
Quote:
Originally Posted by ThunderCactus View Post
Actually now that I list all the stuff, pretty sure someone already makes that gun...
Yup.
__________________
I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection...

Last edited by Ricochet; June 11th, 2016 at 22:16..
Ricochet is offline   Reply With Quote
Old June 11th, 2016, 20:15   #7
VA7POR
 
Join Date: May 2016
Location: Coquitlam, BC
Quote:
Originally Posted by Ricochet View Post
Yup.
Whom would that be for us newer folks?
VA7POR is offline   Reply With Quote
Old June 11th, 2016, 20:56   #8
Danke
 
Danke's Avatar
 
Join Date: Oct 2007
Location: Danger Zone
Systema.
__________________
Airsoft, where nothing is hurt but feelings.
Danke is offline   Reply With Quote
Old June 11th, 2016, 21:44   #9
VA7POR
 
Join Date: May 2016
Location: Coquitlam, BC
Ahhh. Yeah, that makes sense then.
VA7POR is offline   Reply With Quote
Old June 11th, 2016, 23:17   #10
Kingsix
 
Kingsix's Avatar
 
Join Date: Apr 2008
Location: Peoples Republic of Toronto
Quality Material used on the build, Aluminum, Steel, Nylon Fiber, Wood.

Well tolerances Gearbox/GBBR moving parts with good QC, Steel gears and not PIM crap.

No ABS or Zamak, Potmetal

After Sales support, Selling of Spare parts.


Faithful replica of real world firearm.

Something that is not another rehashed Armalite with a Keymod rail.
__________________
Kingsix is offline   Reply With Quote
Old June 11th, 2016, 23:47   #11
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
lol... you know all airsoft gears except for riot seigeteks are sintered steel right?

And all those aluminum alloys that everyone uses is a different mixture of potmetal? Potmetal has aluminum in it, some formulations are more brittle than others.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old June 12th, 2016, 00:20   #12
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
People in airsoft generally dont understand the "good enough" engineering method.
Tokayo marui mechbox shell for example; designed for 280fps. Will survive hundreds of thousands of rounds at 280fps no problem.
Upgrade it to 400fps, breaks in the first few shots.

Same goes for gears. You don't NEED 4140 hardened and tempered gears when sintered metal will do the same job at a third the price.

The shitty brittle potmetal that everyone thinks about is generally dirty zinc or magnesium alloy. Great for computer parts, bad for stuff thats actually under load. Magnesium alloys can be plenty strong, but not when you mix in an unhealthy amount of lead.
ThunderCactus is offline   Reply With Quote
Old June 12th, 2016, 11:24   #13
AnthonyG
LUser Title
 
AnthonyG's Avatar
 
Join Date: Aug 2014
Location: Pickering/Toronto
Quote:
Originally Posted by lurkingknight View Post
lol... you know all airsoft gears except for riot seigeteks are sintered steel right?

And all those aluminum alloys that everyone uses is a different mixture of potmetal? Potmetal has aluminum in it, some formulations are more brittle than others.
Interesting.
__________________

*Busy signing for his packages*
AnthonyG is offline   Reply With Quote
Old June 12th, 2016, 18:30   #14
Enthusiast
 
Join Date: Oct 2014
Location: Montreal
Real Assault Rifle shoot around 12-15 RPS, Why do people want airsoft gun to shoot at 40 , speedsoft maybe ?

Personnaly, I have no interest in RPS.

Last edited by Enthusiast; June 12th, 2016 at 18:33..
Enthusiast is offline   Reply With Quote
Old June 12th, 2016, 18:33   #15
cetane
 
cetane's Avatar
 
Join Date: Jun 2010
Location: Markham & Stouffville - Ontario - Canada
Quote:
Originally Posted by Enthusiast View Post
Real Assault Rifle shoot around 12-15 RPS, Why do people want airsoft gun to shoot at 40 ?
trigger response
cetane is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 21:28.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.