Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

TM Strike Warrior Trigger Problem

:

Doctor's Corner

Reply
 
Thread Tools
Old June 25th, 2014, 15:01   #1
bum_q
 
Join Date: Apr 2013
Location: Burnaby, British Columbia
TM Strike Warrior Trigger Problem

Hey guys, I have a tm strike warrior and the trigger is acting funny. Everytime the slide blows back I have to pull the trigger twice to fire it. The first time I feel a little click and then the second time it actually fires... Anyone know what the deal is?

I'm not very techy.. so not sure what I could do..
bum_q is offline   Reply With Quote
Old June 25th, 2014, 15:57   #2
apilar
 
Join Date: Apr 2012
Location: Port Elgin, Ontario --&-- London, Ontario
I think the farthest right finger of the
3 finger spring needs to be bent toward the front of the gun putting more pressure on the disconnector.
apilar is offline   Reply With Quote
Old June 25th, 2014, 20:34   #3
bum_q
 
Join Date: Apr 2013
Location: Burnaby, British Columbia
Thanks for the input!
Is there a guide or something anywhere that could aid me do that?
bum_q is offline   Reply With Quote
Old June 25th, 2014, 23:35   #4
apilar
 
Join Date: Apr 2012
Location: Port Elgin, Ontario --&-- London, Ontario
This guy's videos are outstanding! Everything you need to know about a 1911/hi capa, meu, nightwarrior, strike warrior etc etc!

Your exact problem starts at about 3.5 minutes into the video! Good luck! Watch his disassembly video of a 1911 if you are stuck on how to disassemble

Trigger group problems and fixes for Marui airsoft 1911s. - YouTube
apilar is offline   Reply With Quote
Old June 26th, 2014, 00:02   #5
jordan7831
will always be Mike Litoris in our hearts
 
jordan7831's Avatar
 
Join Date: Jul 2004
Location: North York - Toronto
I had this problem before with my hi capa. For me it was the disconnector. Try assembling your pistol with the beaver tail and safety off. Observe the disconnector.

For me, the first trigger pull would result in a failure to fire, but I noticed that the disconnector would move upwards slightly. The next pull of the trigger would result in the hammer dropping and the gun firing.

What is happening is that there is something interfering with the disconnector's ability to reset.

That first pull of the trigger is pushing the sear back, which in turn allows the disconnector to be pushed upwards by the leaf spring.

In my case, the new sear was slightly oversized. As a result, it was preventing the disconnector from retuning fully upwards.

If my memory serves me right, the trigger stirrup does not directly push the sear back in the hi capa. Rather the small tab on the disconnector transfers the rearward motion of the trigger pull to the sear. Pulling the trigger that first time allows the disconnector to slip back inbetween the sear and trigger stirrup.

I hope this is technically correct, it was a while since I had this problem.

The soultion: I gently filed down the face of the sear, testing and refiling frequently until the disconnector was able to return to battery after every shot.


NOT MY PICTURES


Notice how the trigger bar does not directly interact with the sear. Rather the it pushes on the disconnector which transfers the rearward movement to trip the sear. After every shot, the small tab must slip back under the sear.

__________________
Quote:
Originally Posted by FirestormX View Post
YOU. ARE. MIKE. LITORUS. And if anyone mocks you, tell them they can suck it!

Last edited by jordan7831; June 26th, 2014 at 00:10..
jordan7831 is offline   Reply With Quote
Old June 26th, 2014, 05:38   #6
bum_q
 
Join Date: Apr 2013
Location: Burnaby, British Columbia
Thanks guys!
bum_q is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 08:16.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.