My custom built .50 BMG

Blastyman · July 7th, 2005, 22:14

Mikeman that was my initial thoughts too. But as I got to work on it I found it impossible to fit 2 gearboxes in and make them shoot out of the barrel and still be able to maintain the dimensions and features I wanted.

But as an aside I do have plans for a 8mm gas version.

btw real m2 has a slow rate of fire anyhow. I am already probably shooting two or 3 times faster then it.

But it is airsoft and in real life the .50 would kick some ass while in airsoft 6mm is 6mm is 6mm.

Suspect187 · July 8th, 2005, 02:16

I am in love :tup:

MadMax · July 8th, 2005, 09:50

Nice work BM! Using basic tools requires a lot of patience. I think you could worry your way out of prison if you had an unlimited supply of plastic spoons.

I bought an electropneumatic pball gun a few years ago with the intention of a very noisy airsoft project. The gun has changable fire modes: semi, 3rnd burst, 6rnd burst, f/a. Stripped down, the important stuff is pretty small: about 2.5" tall, 8" long, 1.25" wide. The gas pressure applied to the pneumatics operating system and the breech are separately regulated so it's possible to modulate muzzle velocity without affecting the recoil cycle (i.e. it can be downtuned to safe muzzle fps without sacrificing recoil perf'). ROF is electronically controlled and is quite easy to adjust (turn a pot').

At FA, this thing is a loud monster.

I think you could hide a decent sized CO2 bottle in a belt bag or even within your rec'r itself. The strong pneumatics could also cycle a bolt plate for more metal clinking fun.

Pretty cheap too at $300 (used) including regulator on a Canadian pball forum. If I had the time, I'd put it into a MG, but I'm not sure if I'd ever get around to it.

ValkXB70 · July 8th, 2005, 10:18

Very nice, imagine the mayhem that could be had if you and Zero Delay ever collaborated...

Silver Wolf · July 8th, 2005, 10:44

Wow !! it's a big toy for a big boy :lol:

lamlok · July 8th, 2005, 11:05

amazing, you are definitely a genius!!!

firemachine69 · July 8th, 2005, 11:43

http://www.marstar.ca/semi-mg/live-1919A4.htm

Wouldn't you want a REAL one instead?

[Avtomat] · July 8th, 2005, 12:02

very very nice

Abstract Cartoon · July 9th, 2005, 15:48

Mass produce! (Yeah yeah making a single one was already an endeavour itself)

Edit: Yeah how does that monster feed anyways?

Edit Edit: Gravity Fed?

Blastyman · July 9th, 2005, 20:39

Nope its electric feed. servo on m16 highcap. Gravity won't keep up. I did mess around with gravity feed for fun but its not reliable that way.

I will take some pics of the internal stuff sometime soon.

[Avtomat] · July 9th, 2005, 20:46

Quote:

Originally Posted by firemachine69

http://www.marstar.ca/semi-mg/live-1919A4.htm

Wouldn't you want a REAL one instead?

thats not a .50 cal........

woow requires a PAL only.

Blastyman · July 9th, 2005, 20:53

The link is to a 1919 not a m2. Though they have a semi version also it is sold out and if it wasn't sold out it costs 10g.

I think its a bit silly to say wouldn't you want a real one. Ofcourse we are airsofters but thats why we play airsoft to use guns to shoot our buddies we could never get in real life like a Full Auto m2. Semi would be cool too but sheesh not worth it in my opinion.

attack-beaver · July 9th, 2005, 20:57

man u r like a god.

Bigmatty · July 9th, 2005, 23:34

Quote:

Originally Posted by firemachine69

http://www.marstar.ca/semi-mg/live-1919A4.htm

Wouldn't you want a REAL one instead?

thats not a .50 cal........

Bunny · July 10th, 2005, 00:07

I had a chance to try this, and it actually shoots better than most people's aegs: fast, hard, and straight. Truly awesome, and as I said at the time- the most impressive thing I've ever seen built in the name of airsoft.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 8th, 2005, 09:50	#18
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	Nice work BM! Using basic tools requires a lot of patience. I think you could worry your way out of prison if you had an unlimited supply of plastic spoons. I bought an electropneumatic pball gun a few years ago with the intention of a very noisy airsoft project. The gun has changable fire modes: semi, 3rnd burst, 6rnd burst, f/a. Stripped down, the important stuff is pretty small: about 2.5" tall, 8" long, 1.25" wide. The gas pressure applied to the pneumatics operating system and the breech are separately regulated so it's possible to modulate muzzle velocity without affecting the recoil cycle (i.e. it can be downtuned to safe muzzle fps without sacrificing recoil perf'). ROF is electronically controlled and is quite easy to adjust (turn a pot'). At FA, this thing is a loud monster. I think you could hide a decent sized CO2 bottle in a belt bag or even within your rec'r itself. The strong pneumatics could also cycle a bolt plate for more metal clinking fun. Pretty cheap too at $300 (used) including regulator on a Canadian pball forum. If I had the time, I'd put it into a MG, but I'm not sure if I'd ever get around to it. __________________ Want nearly free GBB gas?

July 8th, 2005, 10:44	#20
Silver Wolf Trader rating Join Date: Mar 2005 Location: Saint-Adolphe-D'Howard	Wow !! it's a big toy for a big boy :lol: __________________

July 8th, 2005, 12:02	#23
[Avtomat] Trader rating Join Date: Apr 2005 Location: Markham, Ontario	very very nice __________________ Army Glock 17 KJW M700 - gone ICS Ak74 - gone WE hi-capa 5.1 striker - gone TM Ak47 - gone Western Arms Inifnity 3.9 - gone Get your answers here! Answers: $5 Good Answers: $10 Correct Answers: $20 Well-researched Answers complete with reference: $150/hr plus materials

July 7th, 2005, 22:14	#16
Blastyman Trader rating Join Date: Feb 2003 Location: Edmonton ,AB	Mikeman that was my initial thoughts too. But as I got to work on it I found it impossible to fit 2 gearboxes in and make them shoot out of the barrel and still be able to maintain the dimensions and features I wanted. But as an aside I do have plans for a 8mm gas version. btw real m2 has a slow rate of fire anyhow. I am already probably shooting two or 3 times faster then it. But it is airsoft and in real life the .50 would kick some ass while in airsoft 6mm is 6mm is 6mm.

July 8th, 2005, 10:18	#19
ValkXB70 Trader rating Join Date: Aug 2004 Location: Winnipeg MB	Very nice, imagine the mayhem that could be had if you and Zero Delay ever collaborated...

July 8th, 2005, 11:05	#21
lamlok Trader rating Join Date: Jun 2005 Location: HK	amazing, you are definitely a genius!!!

July 9th, 2005, 15:48	#24
Abstract Cartoon Trader rating Join Date: Feb 2005	Mass produce! (Yeah yeah making a single one was already an endeavour itself) Edit: Yeah how does that monster feed anyways? Edit Edit: Gravity Fed?

July 9th, 2005, 20:39	#25
Blastyman Trader rating Join Date: Feb 2003 Location: Edmonton ,AB	Nope its electric feed. servo on m16 highcap. Gravity won't keep up. I did mess around with gravity feed for fun but its not reliable that way. I will take some pics of the internal stuff sometime soon.

July 9th, 2005, 20:53	#27
Blastyman Trader rating Join Date: Feb 2003 Location: Edmonton ,AB	The link is to a 1919 not a m2. Though they have a semi version also it is sold out and if it wasn't sold out it costs 10g. I think its a bit silly to say wouldn't you want a real one. Ofcourse we are airsofters but thats why we play airsoft to use guns to shoot our buddies we could never get in real life like a Full Auto m2. Semi would be cool too but sheesh not worth it in my opinion.

July 9th, 2005, 20:57	#28
attack-beaver Trader rating Join Date: May 2005 Location: calgary	man u r like a god.

July 10th, 2005, 00:07	#30
Bunny Trader rating Join Date: Dec 2002 Location: Vancouver BC	I had a chance to try this, and it actually shoots better than most people's aegs: fast, hard, and straight. Truly awesome, and as I said at the time- the most impressive thing I've ever seen built in the name of airsoft. __________________ BCAC كافر ---------------------- Read Stephen Taylor here Those who trade liberty for safety will ultimately deprive themselves of both.

My custom built .50 BMG

Showcase