This is SAW thread

fuhrmanz · June 22nd, 2014, 21:01

Hey Wilkie, I've the same drun box has you, the small pouch. Did you ever knocked that thing when operating your SAW? I might go too rough when I play but since my CA original bipod flipped and made my drum mag EXPLODE, I'm a little more scare.

Wilkie · June 23rd, 2014, 00:14

I've been lucky with it so far, though I don't go too rough with it. My biggest fear is the plastic clip that holds it on breaking, but it seems sturdy enough I guess. I have a back up one just in case.

EOL · June 26th, 2014, 13:55

Updated pic of my SAW

HackD · July 9th, 2014, 20:00

Just getting ready for OP: Nonods..

My Project de Jour - a greatly improved flexible LMG mount for my Airsoft Stoner 63A LMG, mounted to my Kawasaki 250 ATV field mule. I love vacation quality-time spent in the garage

Extra horizontal arm added between base mount, and upper portion of the gun mount portion. As shown in picture, it is in vehicle-movement/at rest position, with the box-mag resting upon the horizontal arm. Both ends of the horizontal arm rotate 360 degrees, allowing the Stoner 63A LMG full range of elevation and traverse.

Thinking of a big-arse "fuck-off" halogen spot-light gimbled to the top portion of the gun-mount, and a small mounted shield forward of the top portion of the gun-mount to complete the effect.

Rossco66 · July 9th, 2014, 20:37

You bringing this out on Sat Billy?

HackD · July 9th, 2014, 20:38

Quote:

Originally Posted by Rossco66

You bringing this out on Sat Billy?

You betcha.. need a shake-down test on both gun and mount.

cav. · July 10th, 2014, 11:46

Quote:

Originally Posted by HackD

Just getting ready for OP: Nonods..

My Project de Jour - a greatly improved flexible LMG mount for my Airsoft Stoner 63A LMG, mounted to my Kawasaki 250 ATV field mule. I love vacation quality-time spent in the garage

Extra horizontal arm added between base mount, and upper portion of the gun mount portion. As shown in picture, it is in vehicle-movement/at rest position, with the box-mag resting upon the horizontal arm. Both ends of the horizontal arm rotate 360 degrees, allowing the Stoner 63A LMG full range of elevation and traverse.

Thinking of a big-arse "fuck-off" halogen spot-light gimbled to the top portion of the gun-mount, and a small mounted shield forward of the top portion of the gun-mount to complete the effect.

This looks amazingly fun O_O

HackD · July 10th, 2014, 11:57

Quote:

Originally Posted by cav.

This looks amazingly fun O_O

I sure hope it is!

Photo of whole ATV in the weeds, with Stoner63 in dismount firing position. A few more photo's are in the Tactics Techniques and Procedures/Vehicles in Airsoft and Milsim photo thread.

Wilkie · July 10th, 2014, 17:19

Oh man lol that's awesome. I wanna do that with my current saw and field Jeep when I get my new mk46

Brit ter · July 10th, 2014, 20:41

Quote:

Originally Posted by HackD

I sure hope it is!

Photo of whole ATV in the weeds, with Stoner63 in dismount firing position. A few more photo's are in the Tactics Techniques and Procedures/Vehicles in Airsoft and Milsim photo thread.

You need a cam net for that !

HackD · July 10th, 2014, 20:57

Quote:

Originally Posted by Brit ter

You need a cam net for that !

Got a couple, new in package, sitting in the top box for over a year now. Never really had an opportunity to use one yet!

Soon!

HackD · July 22nd, 2014, 16:15

And.. getting a little closer - I said i'd follow through with a big-arse spot-light for an upcoming OP .. mount done. Wiring in, paint, and lexan shield to closely follow. Police-spec door spot-light re-purposed. I've had this kicking around in the garage for better than 20 years, awaiting a purpose.

and the business end..

ViR · July 22nd, 2014, 16:23

That looks like a one big light, gonna blind the hell out of he opposition.

Lexan shield will be curved?.

HackD · July 22nd, 2014, 16:25

Quote:

Originally Posted by ViR

That looks like a one big light, gonna blind the hell out of he opposition.

Lexan shield will be curved?.

Not sure on lexan shield being curved - will try in oven. Good thing i'm single.

Edit July 25th, 2014 - Finit.

Now all set up for OP: No Nods. Lexan shield successful, made in my oven range, molded with a perfectly sized pot-lid.

Wilkie · October 9th, 2014, 23:46

So I'm thinking for one of my many winter projects, I'd like to lighten my saw a little bit. I was just going to purchase a shorter barrelled saw with collapsing stock but now foresee my other money pits getting in the way.

I'd like to put a para stock on it, but up till this point ran a big 3300 mah 9.6v in the stock. What would people recommend instead? My idea was to maybe run it on a 7.4v lipo through a Peq2 or 15. I don't know a thing about lipo, and frankly am not sure if I can use a battery small enough to fit in a peq15 while still be worthwhile in a saw.

Or would people go a different route?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 26th, 2014, 13:55	#258
EOL Trader rating Join Date: Dec 2003 Location: Sweden	Updated pic of my SAW __________________ Join the support gunners group on Facebook https://www.facebook.com/groups/486752978153835/

July 9th, 2014, 20:00	#259
HackD Trader rating Join Date: Jul 2011 Location: Somewhere between Hamilton Ontario, and Hell..	Just getting ready for OP: Nonods.. My Project de Jour - a greatly improved flexible LMG mount for my Airsoft Stoner 63A LMG, mounted to my Kawasaki 250 ATV field mule. I love vacation quality-time spent in the garage Extra horizontal arm added between base mount, and upper portion of the gun mount portion. As shown in picture, it is in vehicle-movement/at rest position, with the box-mag resting upon the horizontal arm. Both ends of the horizontal arm rotate 360 degrees, allowing the Stoner 63A LMG full range of elevation and traverse. Thinking of a big-arse "fuck-off" halogen spot-light gimbled to the top portion of the gun-mount, and a small mounted shield forward of the top portion of the gun-mount to complete the effect. Last edited by HackD; July 9th, 2014 at 20:36..

July 9th, 2014, 20:37	#260
Rossco66 Trader rating Join Date: Aug 2013 Location: Burlington, Ontario	You bringing this out on Sat Billy? __________________

June 22nd, 2014, 21:01	#256
fuhrmanz previously Bunker_King Trader rating Join Date: Oct 2004 Location: Montreal, Quebec	Hey Wilkie, I've the same drun box has you, the small pouch. Did you ever knocked that thing when operating your SAW? I might go too rough when I play but since my CA original bipod flipped and made my drum mag EXPLODE, I'm a little more scare.

June 23rd, 2014, 00:14	#257
Wilkie Trader rating Join Date: Apr 2013 Location: Brandon, Mb	I've been lucky with it so far, though I don't go too rough with it. My biggest fear is the plastic clip that holds it on breaking, but it seems sturdy enough I guess. I have a back up one just in case.

July 10th, 2014, 17:19	#264
Wilkie Trader rating Join Date: Apr 2013 Location: Brandon, Mb	Oh man lol that's awesome. I wanna do that with my current saw and field Jeep when I get my new mk46

July 22nd, 2014, 16:15	#267
HackD Trader rating Join Date: Jul 2011 Location: Somewhere between Hamilton Ontario, and Hell..	And.. getting a little closer - I said i'd follow through with a big-arse spot-light for an upcoming OP .. mount done. Wiring in, paint, and lexan shield to closely follow. Police-spec door spot-light re-purposed. I've had this kicking around in the garage for better than 20 years, awaiting a purpose. and the business end..

July 22nd, 2014, 16:23	#268
ViR Trader rating Join Date: Mar 2005 Location: Milton	That looks like a one big light, gonna blind the hell out of he opposition. Lexan shield will be curved?.

October 9th, 2014, 23:46	#270
Wilkie Trader rating Join Date: Apr 2013 Location: Brandon, Mb	So I'm thinking for one of my many winter projects, I'd like to lighten my saw a little bit. I was just going to purchase a shorter barrelled saw with collapsing stock but now foresee my other money pits getting in the way. I'd like to put a para stock on it, but up till this point ran a big 3300 mah 9.6v in the stock. What would people recommend instead? My idea was to maybe run it on a 7.4v lipo through a Peq2 or 15. I don't know a thing about lipo, and frankly am not sure if I can use a battery small enough to fit in a peq15 while still be worthwhile in a saw. Or would people go a different route?

This is SAW thread

Airsoft Media