Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner > Gas Gun Solutions
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

KSC Glock 18c Part 258 Issue Solved 2005-07-13

:

Gas Gun Solutions

Reply
 
Thread Tools
Old June 16th, 2005, 09:46   #1
BiffTheAncient
 
BiffTheAncient's Avatar
 
Join Date: Feb 2005
Location: Toronto
KSC Glock 18c Part 258 Issue Solved 2005-07-13

Hello,

I was at a game this past Sunday and after using my Glock (1) all day I noticed that the pin that goes in the butt of the slide to hold the fire selector switch was missing (2). This part missing did not seem to impact the performance of the 18c. It fired fine and I switched it from auto to semi and back again, several time (3).

I have checked all of the Retailers at the top of the Page (4) but none seem to carry part 258. So does any one know if any of the retailers stock this part but do not advertise that fact?

Also does any one have any advise on how to prevent this from happening again?

Thanks for your help in advance,
BiffTheAncient

1. KSC Glock 18C w/ Metal Barrel and Slide
2. Part 258
3. I guess pressure from my thumb stopped the fire selector from poping out.
4. Canadian and International Retailers.
__________________
BiffTheAncient

"Too many good docs are getting out of the business. Too many OB-GYNs aren't able to practice their love with women all across this country."
óGeorge W. Bush, Poplar Bluff, Mo., Sept. 6, 2004


"I'm Brick Tamland. People seem to like me because I am polite and I am rarely late. I like to eat ice cream and I really enjoy a nice pair of slacks. Years later, a doctor will tell me that I have an I.Q. of 48 and am what some people call mentally retarded." -Brick Tamland
BiffTheAncient is offline   Reply With Quote
Old June 16th, 2005, 10:20   #2
lupo
 
lupo's Avatar
 
Join Date: Dec 2001
Location: vancouver
You may be missing part #259 aswell if the pin just fell out becuase it is held in place by a small grub screw (#259). You would have to remove the rear sight to check. I may have both parts you are looking for aswell. I will have to check my shop for them.
lupo is offline   Reply With Quote
Old June 16th, 2005, 10:44   #3
BiffTheAncient
 
BiffTheAncient's Avatar
 
Join Date: Feb 2005
Location: Toronto
OK.... I have consulted the Part List / Diagram and I see what you mean. I\m pretty sure that part 259 (1) is still where it should be as the the rear sight is still in place.

Does part 258 (2) have a flat spot or other feature that engages the end of the part 259? If it does I may have misaligned them causing part 259 to be loose and prone to flying out under heavy recoil.

Thanks

1. The grub screw under the rear sight.
2. The pin that hold in the fire selector switch.
__________________
BiffTheAncient

"Too many good docs are getting out of the business. Too many OB-GYNs aren't able to practice their love with women all across this country."
óGeorge W. Bush, Poplar Bluff, Mo., Sept. 6, 2004


"I'm Brick Tamland. People seem to like me because I am polite and I am rarely late. I like to eat ice cream and I really enjoy a nice pair of slacks. Years later, a doctor will tell me that I have an I.Q. of 48 and am what some people call mentally retarded." -Brick Tamland
BiffTheAncient is offline   Reply With Quote
Old June 16th, 2005, 20:38   #4
lupo
 
lupo's Avatar
 
Join Date: Dec 2001
Location: vancouver
Yes part 258 does have a slot that 259 fits into and they have to be aligned properly.
lupo is offline   Reply With Quote
Old July 13th, 2005, 11:31   #5
BiffTheAncient
 
BiffTheAncient's Avatar
 
Join Date: Feb 2005
Location: Toronto
Part # 258 Has been aquired, properly installed and field tested.

Thanks to all for their assitance.
__________________
BiffTheAncient

"Too many good docs are getting out of the business. Too many OB-GYNs aren't able to practice their love with women all across this country."
óGeorge W. Bush, Poplar Bluff, Mo., Sept. 6, 2004


"I'm Brick Tamland. People seem to like me because I am polite and I am rarely late. I like to eat ice cream and I really enjoy a nice pair of slacks. Years later, a doctor will tell me that I have an I.Q. of 48 and am what some people call mentally retarded." -Brick Tamland
BiffTheAncient is offline   Reply With Quote
Old December 6th, 2005, 00:52   #6
Oreowarrior
 
Join Date: Dec 2005
Location: VirginiaUSA
Yea my part 258 has gone missing... where did you manage to find a replacement part, retailer?
Oreowarrior is offline   Reply With Quote
Old December 6th, 2005, 01:04   #7
666
 
666's Avatar
 
Join Date: Jul 2004
Location: Toronto, Ontario
http://www.dentrinityshop.com/pr_lis...SC&pg=5&rpp=10
666 is offline   Reply With Quote
Old June 8th, 2012, 04:19   #8
Donnie Yen
 
Join Date: Jun 2012
Thank you all, gentle men, I've got the same matters. I'll check the #259 grub screw this evening. Although the #258 has been very loose but I have not yet lost it.

For my appreciation, I share with you some more shops which supply the damn things
1. http://shop.ehobbyasia.com/pas-steel...rt-no-258.html
2. http://www.tokyo-model.com.hk/ecshop/goods.php?id=8494
3. http://www.tokyo-model.com.hk/ecshop/article.php?id=27
Donnie Yen is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner > Gas Gun Solutions

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 05:00.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.