We Glock 18 Parts.

[siggypoo]

I'm looking for parts for DeeJay's Glock 18 from We. The manuals on We's site show parts for the semi-autos only, and not what I need for the 18.
I'm looking for the full auto parts:
Full auto sear.
Full auto sear spring.
I don't know if the semi auto parts are different between the 17 and the 18 to accommodate the 18 parts, so I'm also looking for:
Hammer.
Hammer roller.
Semi-auto sear.

If those semi-auto parts are the same between the 17 and the 18, I'd like to know that so I can search for them as opposed to restricting my searches to 18. I also don't know if there are other brands that'd be less expensive that'd be compatible. Any brand that would work would be great.
Evike has some of these parts in stock, and others not. Shipping is standard-fare Evike.

So...
Does anyone know a source for these parts in Canada? I'd like to contact them and ask about availability, prices and shipping to L1H6C5.

Lastly, asking for your opinions; given the parts needed to replace and/or repair, do you think this is worth the trouble, or should we return it to the trader before we commit?


Common sense is so rare it should be a super power.
- DeeJay

[famidrive]

Posting to say I tried to search for them and didn't come up with much.
I can tell you that I have successfully integrate WE & TM parts with
some trial & error filing and sanding (for the 17, mind you). Maybe
you can do the same if all else fails? Grab some AIP replacement
parts or something.

[siggypoo]

I was under the impression TM and We were all cross-compatible, but recent experience agrees with an article DeeJay found here on ASC that the TM hammer (and roller?) don't mesh with the We sear.
Now I'm wondering if adding a TM sear would resolve the sear-hammer engagement and leave me with a working BB thrower, or if I'd have to replace still more parts that engage the sear.
Then there's the huge difference between the We and TM hammer roller.


Common sense is so rare it should be a super power.
- DeeJay

[Deejay2401]

Yeah, everyone says that TM and WE are cross compatible, but there seem to be little differences here and there - both in terms of the full-auto G series we're working on, as well as a few guns I've had in the past. They'll usually work, but require a little manhandling to get properly fitted.

http://manual.weairsoft.com/GBB-Pist...UTO-Series.pdf

That manual might help.

[Caelum]

Not in Canada, but check out Evike: http://www.evike.com/search/?search_...=we18c&x=0&y=0

http://www.evike.com/products/45884/

Now I'm pretty sure the parts from WEs other full auto glocks would fit in your gun, so you could expand your search with these parts:
http://www.evike.com/products/41153/
http://www.evike.com/products/41155/
http://www.evike.com/products/41152/
http://www.evike.com/products/41157/

Again, that's just a wild claim. It makes sense to me, but I have no hard proof to back it up.

Good luck!

[ccyg8774]

Hammer roller: They look similar, but the WE G18 one is about 1mm larger in diameter than the WE G17. I think that means incompatible.
Hammer: Different. The WE G18 hammer have an additional "cut" to fit the full-auto sear.
Semi-auto sear: I am not sure which parts you mean.

If you mean the part G-27, it is interchangable between WE G17 and G18.

In additional to G18, other WE select fire Glock (G26, G23, G35) should use the same set of parts.

In terms of other brands, I don't think they are worth trying. They are not necessarily cheaper nor easier to find, and you still need to risk compatiblilty issues or working to make them fit.

If you can't find those parts in Canada or North America, I am planning a small order of parts from a Taiwan store, this month or next. They will have WE parts or will be able to do a special order from WE. Let me know if you need to add a few parts to the order.

Lastly, asking for your opinions; given the parts needed to replace and/or repair, do you think this is worth the trouble, or should we return it to the trader before we commit?

I think that will depends on the price of the trade, and the overall and cosmetic condition of the gun.

[siggypoo]

Err, looking at that diagram, the semi-auto sear is G23. I don't see any reason why it'd not be compatible.


Common sense is so rare it should be a super power.
- DeeJay

[Deejay2401]

At this point, the only parts I'm looking for now are the actual slide itself, and the fire selector detent pin and spring.

[BioRage]

How about this?

http://www.ebairsoft.com/g18c-alumin...de-p-5063.html

[Deejay2401]

I was actually just looking at that. Wondering if it'd be WE compatible. If not, how much work it'd take. For the price, that's not a bad option, if it's workable.

[BioRage]

Else just grab this lol

http://www.ebairsoft.com/airsoft-ate...er-p-8094.html

[Deejay2401]

Whoa, damn. Didn't think one so pretty would be so "cheap." Thanks for the heads up. I'll keep those options in mind.