Magazine problems help please

Jdawg · August 27th, 2012, 23:22

Hey I recently bought a gun it's a G&G gr24 m4 half metal body AEG and I love it except for the fact the when I load the magazine it spits out 4 to 5 bb's out and it makes it not want to pick up the bb's sometimes and it's soooooo annoying and the magazine wobbles I was wondering if anyone knew what's happening and if it's fixable and how good is the gun I bought I'm just starting out and I Paid 275 for it please I need help and it in mint condition except for this problem

Jdawg · August 27th, 2012, 23:22

Gr14 not gr24

Jdawg · August 27th, 2012, 23:25

Please I need help someone

L473ncy · August 27th, 2012, 23:55

You know bumping a topic after 2 minutes doesn't help in any way at all right?

As for your problem, it's not. The last 4 or 5 BB's in a mag will NEVER load. It's how the hop up unit and mag interface. There's a tube that connects the mag to the main hop up chamber and if the BB doesn't get in there it won't hold.

As for the mag wobble problem, that's also normal. Shouldn't have too much play but some play in the mag is normal. Worst comes to worst just tape it and add some layers to make it tighter in the magwell.

Jdawg · August 28th, 2012, 02:05

Hey thanks and I know bumping won't help lol but thanks for the help

Ready · August 28th, 2012, 02:14

There are some companies that make mags that fixes the BB issue. Dboys is one of them I think. There's a little plunger that pushes every BB up into the gun, so there's no waste.

jordan7831 · August 28th, 2012, 09:32

Really needed to make two treads for this question?

CDN_Stalker · August 28th, 2012, 10:08

Do the BBs roll out the end of the barrel when you put a loaded mag in? If you bought it new, chances are the hop up is set full off, dial in a bit of hop up and that will keep the BBs in the gun ready to shoot.

Ricochet · August 28th, 2012, 11:10

Everytime you remove a magazine from most AEGs, they'll drop about four BBs. Do not pick up BBs that land on the floor, and put them in your gun. If you want to cut down on mag wobble try a higher quality magazine, like King Arms.

HKGhost · August 28th, 2012, 13:25

If you don't want those 4-5 bbs from dropping out, you have two options. 1st is to buy a hop up chamber that has an o-ring at the feeding tube, 2nd is to mod your current hop up chamber with a groove and a small slit. Place a small tight o-ring around this groove and from now on, all bbs will remain within the chamber but won't feed until you load a new mag. The problem with this is you won't be able to clear your gun. Those bbs will remain in there and could load during dry fires. Very dangerous if you're trying to clear at a game. Turning the gun upside down might not feed all the bbs. It's better to lose those 4-5 on the ground than to have them fly at someone or thing unexpectedly during dry firing.

AshleyBing · August 30th, 2012, 22:35

There's a little plunger that pushes every BB up into the gun, so there's no waste.

Brian McIlmoyle · August 30th, 2012, 22:58

Ignore it, there is nothing wrong with the gun.

4bbs = 2 cents

Mag wabble means nothing as long as it retains and feeds.

Stop fondling the gun and get out and shoot it.

infernau · September 1st, 2012, 08:19

If the mag is really loose (and it bothers you) you might want to get some velcro (fuzzy side only, with adhesive back) cut a strip maybe 1/2 inch wide by 2 inches long and stick it into the magwell vertically, put a piece on both side (so you balance out the mag). Not all mags fit in all receivers, if you have friends that run a variety of mags try a bunch and compare, if nothing works try the velcro thing. You can spend $$ on a new hop up and new mags but for $2-$3 you can find out really quick if the velcro will do the trick for you.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 27th, 2012, 23:22	#1
Jdawg Trader rating Join Date: Aug 2012	Magazine problems help please Hey I recently bought a gun it's a G&G gr24 m4 half metal body AEG and I love it except for the fact the when I load the magazine it spits out 4 to 5 bb's out and it makes it not want to pick up the bb's sometimes and it's soooooo annoying and the magazine wobbles I was wondering if anyone knew what's happening and if it's fixable and how good is the gun I bought I'm just starting out and I Paid 275 for it please I need help and it in mint condition except for this problem

August 27th, 2012, 23:55	#4
L473ncy Trader rating Join Date: Oct 2004 Location: 11-30-24-1W5	You know bumping a topic after 2 minutes doesn't help in any way at all right? As for your problem, it's not. The last 4 or 5 BB's in a mag will NEVER load. It's how the hop up unit and mag interface. There's a tube that connects the mag to the main hop up chamber and if the BB doesn't get in there it won't hold. As for the mag wobble problem, that's also normal. Shouldn't have too much play but some play in the mag is normal. Worst comes to worst just tape it and add some layers to make it tighter in the magwell. __________________ ಠ_ಠLess QQ more Pew Pew READY TO >> RACE

August 28th, 2012, 10:08	#8
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Do the BBs roll out the end of the barrel when you put a loaded mag in? If you bought it new, chances are the hop up is set full off, dial in a bit of hop up and that will keep the BBs in the gun ready to shoot. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

August 27th, 2012, 23:25	#3
Jdawg Trader rating Join Date: Aug 2012	Please I need help someone

August 28th, 2012, 02:05	#5
Jdawg Trader rating Join Date: Aug 2012	Hey thanks and I know bumping won't help lol but thanks for the help

August 28th, 2012, 02:14	#6
Ready Trader rating Join Date: Feb 2012 Location: Calgary, AB	There are some companies that make mags that fixes the BB issue. Dboys is one of them I think. There's a little plunger that pushes every BB up into the gun, so there's no waste.

August 28th, 2012, 09:32	#7
jordan7831 will always be Mike Litoris in our hearts Trader rating Join Date: Jul 2004 Location: North York - Toronto	Really needed to make two treads for this question?

August 28th, 2012, 11:10	#9
Ricochet How much sand CAN you fit in your vagina!? Trader rating Join Date: Feb 2008 Location: North Delta, BC (Greater Vancouver)	Everytime you remove a magazine from most AEGs, they'll drop about four BBs. Do not pick up BBs that land on the floor, and put them in your gun. If you want to cut down on mag wobble try a higher quality magazine, like King Arms. __________________ I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection...

August 28th, 2012, 13:25	#10
HKGhost Trader rating Join Date: Nov 2009 Location: Mississauga, ON	If you don't want those 4-5 bbs from dropping out, you have two options. 1st is to buy a hop up chamber that has an o-ring at the feeding tube, 2nd is to mod your current hop up chamber with a groove and a small slit. Place a small tight o-ring around this groove and from now on, all bbs will remain within the chamber but won't feed until you load a new mag. The problem with this is you won't be able to clear your gun. Those bbs will remain in there and could load during dry fires. Very dangerous if you're trying to clear at a game. Turning the gun upside down might not feed all the bbs. It's better to lose those 4-5 on the ground than to have them fly at someone or thing unexpectedly during dry firing. __________________ Please email me as I'm not on ASC too often. Custom Build \| Upgrades \| Repairs \| Maintenance Contact: ghostgunwork@gmail.com / Private Message

August 30th, 2012, 22:35	#11
AshleyBing Trader rating Join Date: Aug 2012 Location: http://www.easydvdmart.com/	There's a little plunger that pushes every BB up into the gun, so there's no waste. __________________ One More Happy Feeling on DVDs --- The Mentalist Season 4 DVD, Understanding Real Meaning of Love.

August 30th, 2012, 22:58	#12
Brian McIlmoyle 8=======D Trader rating Join Date: Apr 2005 Location: Toronto	Ignore it, there is nothing wrong with the gun. 4bbs = 2 cents Mag wabble means nothing as long as it retains and feeds. Stop fondling the gun and get out and shoot it. __________________ Brian McIlmoyle TTAC3 Director CAPS Range Officer Toronto Downtown Age Verifier OPERATION WOODSMAN If the tongue could cut as the sword does, the dead would be infinite

September 1st, 2012, 08:19	#13
infernau Trader rating Join Date: Mar 2009 Location: Barrie, Ontario	If the mag is really loose (and it bothers you) you might want to get some velcro (fuzzy side only, with adhesive back) cut a strip maybe 1/2 inch wide by 2 inches long and stick it into the magwell vertically, put a piece on both side (so you balance out the mag). Not all mags fit in all receivers, if you have friends that run a variety of mags try a bunch and compare, if nothing works try the velcro thing. You can spend $$ on a new hop up and new mags but for $2-$3 you can find out really quick if the velcro will do the trick for you.

Magazine problems help please

Newbie Tank