Semi Auto Fires 2 or 3 rounds (MP5SD5)

Cerwin · May 31st, 2005, 17:45

My TM MP5 SD5 is well used and works very well But in semi auto it fires multiple rounds 2 or 3 is my guess kinda hard to count. this just started i have never had a problem with it B4.

It is upgraded with TP 170%, gears, tightbore, airseal, mostly metal.

Did i break somthing ?

Any helpfull comments would be apretiated.
Thank you

ps. is it normal that a round rolls out the barrel sometimes.

concept_8 · May 31st, 2005, 17:51

Could be the tappet plate or nozzle.
Maybe the grove in the nozzle the tappet plate goes into has worn down, or it may have just moved out of place.
Check it out if you're into cracking the gun open.
It's the exterior of the mech box so it's not that big a job to check out those 2 parts.

good luck.

damage · May 31st, 2005, 18:16

if there is a screw that secures the stock to the reciever, you might want to loosen that a bit.

666 · May 31st, 2005, 20:38

You hop-up sleeve might be damaged as well. I had double feeding problem when hop-up got chewed up.

Quote:

Originally Posted by damage

if there is a screw that secures the stock to the reciever, you might want to loosen that a bit.

Screw? All MP5's I've seen had a pin holding stock attached to the receiver. Also, I'm just wondering what does stock have to do with double feeding?

Mysteryfish · May 31st, 2005, 21:27

I second the hop-up sleeve notion...

If the rear-most part of the hop up sleeve is worn through, or chewed up, or absent, there's nothing to stop more than one BB from travelling up the feed-tube into the barrel during the time between the nozzle retracting and coming forward.

Best check that first. It's probably the easier part to access (of all the possible problem points) and if you find it's the issue, it'll save you tonnes of trouble right off the bat, rather than pulling the whole gun apart.

Good luck!

Cerwin · May 31st, 2005, 23:31

I dont think it is a feeding problem. I think 1 bb fires out each cycle but somtimes it goes through 2 or 3 cycles with 1 pull of the trigger. and somtimes in semi if you hold down the trigger it fires exactly like full auto

PoFF · June 1st, 2005, 07:54

My guess would be a worn out selector plate and/or a worn or misplaced 'disconnector' (the thing that makes the motor stop after a single shot)

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 31st, 2005, 17:45	#1
Cerwin Trader rating Join Date: Mar 2005 Location: Ontario	Semi Auto Fires 2 or 3 rounds (MP5SD5) My TM MP5 SD5 is well used and works very well But in semi auto it fires multiple rounds 2 or 3 is my guess kinda hard to count. this just started i have never had a problem with it B4. It is upgraded with TP 170%, gears, tightbore, airseal, mostly metal. Did i break somthing ? Any helpfull comments would be apretiated. Thank you ps. is it normal that a round rolls out the barrel sometimes.

May 31st, 2005, 17:51	#2
concept_8 Trader rating Join Date: Sep 2004 Location: sudbury Ont.	Could be the tappet plate or nozzle. Maybe the grove in the nozzle the tappet plate goes into has worn down, or it may have just moved out of place. Check it out if you're into cracking the gun open. It's the exterior of the mech box so it's not that big a job to check out those 2 parts. good luck. __________________ "Death in the tall grass"

May 31st, 2005, 18:16	#3
damage Trader rating Join Date: Jan 2005 Location: Port Coquitlam, BC	if there is a screw that secures the stock to the reciever, you might want to loosen that a bit. __________________ Team P.I.M.P. Vancouver BC -Guntech(PM or E-mail only)

May 31st, 2005, 21:27	#5
Mysteryfish Trader rating Join Date: Mar 2004 Location: North Vancouver, B.C.	I second the hop-up sleeve notion... If the rear-most part of the hop up sleeve is worn through, or chewed up, or absent, there's nothing to stop more than one BB from travelling up the feed-tube into the barrel during the time between the nozzle retracting and coming forward. Best check that first. It's probably the easier part to access (of all the possible problem points) and if you find it's the issue, it'll save you tonnes of trouble right off the bat, rather than pulling the whole gun apart. Good luck!

May 31st, 2005, 23:31	#6
Cerwin Trader rating Join Date: Mar 2005 Location: Ontario	I dont think it is a feeding problem. I think 1 bb fires out each cycle but somtimes it goes through 2 or 3 cycles with 1 pull of the trigger. and somtimes in semi if you hold down the trigger it fires exactly like full auto

June 1st, 2005, 07:54	#7
PoFF Trader rating Join Date: Dec 2001 Location: Laval, QC	My guess would be a worn out selector plate and/or a worn or misplaced 'disconnector' (the thing that makes the motor stop after a single shot) __________________ Founding member of the S.A.T.T - That's right, were BACK! The only purpose for a pistol is to fight your way back to the rifle you should have never laid down Visitez Arme ?* Feu.com - Le site des amateurs d'armes ?* feu francophones

Semi Auto Fires 2 or 3 rounds (MP5SD5)

Doctor's Corner