|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 30th, 2015, 16:25
|
#1 |
|
11.1V Lipo And 25A 250V fuse
Okay I Have a VFC M16 AEG, Now I have only run the gun on 7.4v 1200 cell lipo batteries since I got it. Now I do have a 11.1v 1200 cell lipo I got with another gun in a deal.
I know mosfets are recommended when using 11.1V batteries. However the m16 does have a fuse set up in the rear wire harness with a 25A 250V fuse in it. Is this set up good enough to ensure I don't kill my gun if I choose to run the gun with a 11.1v in it for a day? I am planning to mosfet the gun in the future but would like to know is this is acceptable to run a 11.1 for a game day without frying anything. any information appreciated |
|
|
|
October 30th, 2015, 16:31
|
#2 |
|
The trigger contacts will last the day ok. Pme could be an issue depending on spring strength & piston mass.
__________________
Looking to get age verified in York region? Click link... |
|
|
|
|
October 30th, 2015, 16:37
|
#3 |
|
I ran 11.1v lipos on my vfc which was stock with zero trigger contact issues.
|
|
|
|
|
October 30th, 2015, 16:51
|
#4 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Fuse aint gonna do shit to protect shit.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
