Mid caps that will properly feed .30 BB's and heavier?

Rossco66 · March 7th, 2015, 14:59

expensive trash then.

Stealth · March 7th, 2015, 17:22

Truthfully I've been having some issues with Bioshot 0.32s, which is why I pulled them from the market and alerted them of this problem.

They've been receptive and acknowledge that the batch was defective. I'm working with them right now to fix things and to make sure that everything works well before releasing them to the market.

If you grabbed Bioshots from me, let me know and I'll fully refund you your money. I'll also guarantee that any future Bioshots you get from me will feed properly.

Regarding HS5 followers, I'll have a bunch incoming. Stay tuned.

Trev140_0 · March 8th, 2015, 08:56

https://www.youtube.com/watch?v=InnbpzQG1WY

.32

Rossco66 · March 8th, 2015, 11:10

You've only ever had the .28 in the trunk

Quote:

Originally Posted by Trev140_0

https://www.youtube.com/watch?v=InnbpzQG1WY

.32

Rossco66 · March 8th, 2015, 16:52

Tried the follower mod but I'm not sure if there is any distinguishable difference. I also stretched the springs a bit before reassembly which could have helped as well.

lurkingknight · March 8th, 2015, 18:09

that's awesome news

Quote:

Originally Posted by Stealth

Truthfully I've been having some issues with Bioshot 0.32s, which is why I pulled them from the market and alerted them of this problem.

They've been receptive and acknowledge that the batch was defective. I'm working with them right now to fix things and to make sure that everything works well before releasing them to the market.

If you grabbed Bioshots from me, let me know and I'll fully refund you your money. I'll also guarantee that any future Bioshots you get from me will feed properly.

Regarding HS5 followers, I'll have a bunch incoming. Stay tuned.

Rossco66 · March 11th, 2015, 21:37

Tried Madbull .32's bio and they spewed like a 16 year old at a prom date after party. Glad to know I spent a couple hours filing my followers into pretty stairs just to find out it was the BB's grrrr

Spike · March 11th, 2015, 21:53

Madbull .32s are all I run in my rifles now. They're so good mmmmmmmmmmmm

ThunderCactus · March 11th, 2015, 22:09

PTW mags are notorious for wearing out their springs on heavy ammo. Even stretching the springs 30% has limited effect.
Ended up getting MAG springs (heh), stretched those 15%, work great now.

Old madbull bios had coating issues, allegedly they left a film on everything. I'm using madbull non-bio .30s to great effect, but would like to use a bio BB. Comes down to BBB .28s or madbulls (don't like green devils).

Foxer2373 · March 11th, 2015, 22:10

Quote:

Originally Posted by Foxer2373

Love my 0.3g bio premium Golden balls in my PTW this year.

Change that, they now crack and cut in half ever 5shots once the hopup was dialed in. I used Madbull non bio and they were amazing. Back to the drawing board for a bio option.

Stealth · March 11th, 2015, 23:37

Just gonna leave this here in case anyone was interested...

ThunderCactus · March 12th, 2015, 12:46

With a two part design, wouldn't the pressure between the BBs and spring cause the 2pc follower to wedge itself against the BB channel, increasing friction?

MADDOG · March 12th, 2015, 14:40

I just solved the problem in my Beta project AK mags (PTS mags)

These would never reliably feed especially when filled to the 140 rd capacity.
They have the hinged followers with the rounded point that jams up against the side and the other BB's periodically.

What I did was really easy to fix and I just tested it with 7 different full mags on a 40RPS AK.
It fed flawlessly the entire mag, no misfeeds at all, where there would usually be many until the mag was at least half empty.

All I did was take a soldering iron with a round tip, approximately the same size as a BB.
I pulled the follower up through the BB release catch so that the tip was caught above the BB release lip.

I then pressed the heated solder tip into the centre of the follower and melted it until there was a round indentation that would solidly cup the bottom of a BB. This way the follower never moves off the bottom bb or slides around causing a jam.

I was extremely surprised, whole mag, 140 rounds non stop to the very last BB on full auto, not one problem with .30 BB's. And it can all be done without taking the whole mag apart.
Give it a try, I know these mags are going back into regular use for me now, they sat in the bag before because they did not feed reliably.

BioRage · March 12th, 2015, 14:48

Quote:

Originally Posted by lurkingknight

that's awesome news

I need this gif...

in my signature, with this

Azathoth · March 17th, 2015, 13:55

Quote:

Originally Posted by ThunderCactus

PTW mags are notorious for wearing out their springs on heavy ammo. Even stretching the springs 30% has limited effect.
Ended up getting MAG springs (heh), stretched those 15%, work great now.

Old madbull bios had coating issues, allegedly they left a film on everything. I'm using madbull non-bio .30s to great effect, but would like to use a bio BB. Comes down to BBB .28s or madbulls (don't like green devils).

PTWs are also notorious for being picky about the ammo they can shoot, and the ammo that will feed in the mag.

I have problems with biovals and Goldenballs. Devils, Bastard, madbull .43, and silica's is what the gun wants in its gob and bottle.

Frank can you send me a sample of Madbulls? I abandoned them back in 2010 when the packaging changed their was a big quality drop.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 7th, 2015, 14:59	#31
Rossco66 Trader rating Join Date: Aug 2013 Location: Burlington, Ontario	expensive trash then. __________________

March 8th, 2015, 08:56	#33
Trev140_0 raging hedrosexual Trader rating Join Date: Sep 2011	https://www.youtube.com/watch?v=InnbpzQG1WY .32 __________________ www.Hill437.com *"....Your life is ending one minute at a time..."*

March 8th, 2015, 16:52	#35
Rossco66 Trader rating Join Date: Aug 2013 Location: Burlington, Ontario	Tried the follower mod but I'm not sure if there is any distinguishable difference. I also stretched the springs a bit before reassembly which could have helped as well. __________________

March 7th, 2015, 17:22	#32
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	Truthfully I've been having some issues with Bioshot 0.32s, which is why I pulled them from the market and alerted them of this problem. They've been receptive and acknowledge that the batch was defective. I'm working with them right now to fix things and to make sure that everything works well before releasing them to the market. If you grabbed Bioshots from me, let me know and I'll fully refund you your money. I'll also guarantee that any future Bioshots you get from me will feed properly. Regarding HS5 followers, I'll have a bunch incoming. Stay tuned.

March 11th, 2015, 21:37	#37
Rossco66 Trader rating Join Date: Aug 2013 Location: Burlington, Ontario	Tried Madbull .32's bio and they spewed like a 16 year old at a prom date after party. Glad to know I spent a couple hours filing my followers into pretty stairs just to find out it was the BB's grrrr __________________

March 11th, 2015, 21:53	#38
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Madbull .32s are all I run in my rifles now. They're so good mmmmmmmmmmmm __________________ I change primaries like other people change socks.

March 11th, 2015, 22:09	#39
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	PTW mags are notorious for wearing out their springs on heavy ammo. Even stretching the springs 30% has limited effect. Ended up getting MAG springs (heh), stretched those 15%, work great now. Old madbull bios had coating issues, allegedly they left a film on everything. I'm using madbull non-bio .30s to great effect, but would like to use a bio BB. Comes down to BBB .28s or madbulls (don't like green devils).

March 11th, 2015, 23:37	#41
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	Just gonna leave this here in case anyone was interested...

March 12th, 2015, 12:46	#42
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	With a two part design, wouldn't the pressure between the BBs and spring cause the 2pc follower to wedge itself against the BB channel, increasing friction?

March 12th, 2015, 14:40	#43
MADDOG Trader rating Join Date: Feb 2003 Location: Aurora/Ontario	I just solved the problem in my Beta project AK mags (PTS mags) These would never reliably feed especially when filled to the 140 rd capacity. They have the hinged followers with the rounded point that jams up against the side and the other BB's periodically. What I did was really easy to fix and I just tested it with 7 different full mags on a 40RPS AK. It fed flawlessly the entire mag, no misfeeds at all, where there would usually be many until the mag was at least half empty. All I did was take a soldering iron with a round tip, approximately the same size as a BB. I pulled the follower up through the BB release catch so that the tip was caught above the BB release lip. I then pressed the heated solder tip into the centre of the follower and melted it until there was a round indentation that would solidly cup the bottom of a BB. This way the follower never moves off the bottom bb or slides around causing a jam. I was extremely surprised, whole mag, 140 rounds non stop to the very last BB on full auto, not one problem with .30 BB's. And it can all be done without taking the whole mag apart. Give it a try, I know these mags are going back into regular use for me now, they sat in the bag before because they did not feed reliably. __________________ WOLFPACK U-96 Cry Havoc, Let slip the Dogs of War! "Opportunities multiply as they are seized." - Sun Tzu, The Art of War Last edited by MADDOG; March 12th, 2015 at 15:33..

Mid caps that will properly feed .30 BB's and heavier?

Airsoft Guns Discussion