WE M4 double single shot

[BIG]

Hi guys,

I noticed that when I shoot in single mode, hold the trigger, then slowly release the trigger my gun will fire another shot.

Anybody else noticed that?

My trigger box is completely rebuilt with RAtech parts.

Thanks!

[MaybeStopCalling]

RATech parts? There's your problem. They're known for this.

[onizukahibino]

my inokatsu 2011 version does that out of the box! and i can't find the problem. i changed hammer spring, entire bolt carrier and problem still persist

but both of my WE m4 never experience this issue. i also have my entire trigger set changed to RAtech and RAtech npas bolt carrier set.

i kinda just gave up on the inokatsu since it's just a display piece now... but i do wish to get it fix!

[FirestormX]

You could probably put it up for sale, with this "problem" as an enhancement.
Auto-operator: double taps every time.

[Kos-Mos]

If I remember correctly, it's something about the trigger sear not being correctly angled, letting is slip if you go too slow.
Basically the selector sear hold the hammer after the first cycle, and when you release the trigger slowly, the selector sear lets the hammer go just a tiny bit before the sear engages, so the gun fires again.

[MaybeStopCalling]

Either use the stock trigger parts or CWI parts, the issue will go away.

[BIG]

thank you very much guys.

I'll will desasemble my trigger box and watch for that. I still have all original parts anyway