Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

KJW M4 V3 bolt disassembly

:

Upgrades & Modifications

Reply
 
Thread Tools
Old September 19th, 2021, 20:39   #1
short1st
 
Join Date: Jun 2015
KJW M4 V3 bolt disassembly

Hello guys!

I am trying to disassemble my KJW M4 version 3 bolt in order to install an NPAS to respect field FPS limits.

My issue is that after removing the main bolt pin (part 118 in the imagur image), I can not figure out what to do next to remove the piston from the bolt.

https://imgur.com/a/jPgLLPv

The V2 bolt has another piece which you unscrew to free the piston from the bolt, but the V3 does not have it, and I cannot figure out how to pull the piston out.

Is there some kind of clip that I'd have to push, or some way I'd have to turn the piston, etc, to free it from the bolt?

Any help greatly appreciated!!
short1st is offline   Reply With Quote
Old September 21st, 2021, 12:04   #2
Smitico
 
Join Date: Dec 2006
Location: Edmonton
It's a little dated, but I remember dealing with the same pin in my V1 when I installed the old Cradle velocity reducer.

If it's anything like my V1, it should tap out similar to install video below:
https://www.youtube.com/watch?v=MmHE3clqOqE&t=240s

See about 50 seconds into the video.

Cheers and good luck!
Smitico is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 03:59.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.